Cement clinker is a solid material produced in the manufacture of Portland cement as an intermediary product. Clinker occurs as lumps or nodules, usually 3 millimetres to 25 millimetres in diameter.
Premium Portland Cement Clinker / Type II and I For Cement Production And Construction Color: Grey Lead time (days) 30 To be negotiated Application: Office Building Design Style: Contemporary Type: Cement Clinker Hardening Feature: Rapid Hardening HCSA BINDER is a hydraulic binder based on calcium sulphoaluminate, rather than calcium aluminates which are the basis of CALCIUM ALUMINATE CEMENT or calcium silicates which are the basis of PORTLAND CEMENT. The difference gives HCSA BINDER properties particularly suited to formulators of products such as self-leveling or self-smoothing compounds, rapid hardening screeds, tile adhesives, non-shrink grouts, rapid setting and special mortars.
GGBFS Ground granulated blast furnace slag (GGBFS) The ground granulated blast furnace slag (GGBFS) is a by-product of iron manufacturing which when added to concrete improves its properties such as workability, strength and durability. This material is obtained by the heating of iron ore, limestone and coke at a temperature about 1500 degree Celsius. The process is carried out in a blast furnace. The formation of GGBFS is not direct. The by-product of iron manufacturing is a molten slag and molten iron. The molten slag consists of alumina and silica, also with the certain amount of oxides. This slag is later granulated by cooling it. For this, it is allowed to pass through a high-pressure water jet. This result in quenching of the particles which results in granules of size lesser than 5mm in diameter. The main constituents of blast furnace slag are CaO, SiO2, Al2O3 and MgO. These are the minerals that are found in most of the cementitious substances. The particles are further dried and ground in a rotating ball mill to form a fine powder, known as ground granulated blast furnace slag cement. Now different methods can be employed to perform the main process called as the quenching. Applications & Benefits of GGBFS: In concrete: The incorporation of ground granulated blast furnace slag in concrete manufacture gains many advantages which are mentioned below: GGBFS in concrete increases the strength and durability of the concrete structure. It reduces voids in concrete hence reducing permeability GGBFS gives a workable mix. It possesses good pumpable and compaction characteristics The structure made of GGBFS constituents help in increasing sulphate attack resistance. The penetration of chloride can be decreased. The heat of hydration is less compared to conventional mix hydration. The alkali-silica reaction is resisted highly. These make the concrete more chemically stable. Gives good surface finish and improves aesthetics. The color is more even and light. Lower chances of efflorescence. The maintenance and repair cost of structures are reduced thus increasing the life cycle of concrete structures. Unlike cement, GGBFS does not produce carbon dioxide, sulphur dioxide or nitrogen oxides. White Cement: White Portland Cement is of high quality, whiteness and strength, it essentially has the same properties and characteristics as gray cement, except for color. It is widely used in numerous applications such as precast concrete, cast-in-place concrete, terrazzo, median barriers, curbs, tile grout, paint, masonry units, swimming pools, glass fibre reinforced surface bonding mortars.
Cement Clinker, a crucial component in the production of Portland cement, is created by heating a mixture of limestone and clay in a kiln until it forms small, gray nodules. These nodules are then finely ground to produce the cement powder used in construction. Clinker's chemical composition, including calcium silicates and aluminates, determines the strength and durability of the resulting cement
Type 2 OPC cement, a variant of Portland cement, possesses moderate heat of hydration and sulphate resistance. Its balanced properties make it suitable for general construction applications, providing durable and stable structures in environments with moderate sulphate exposure. Pozzolan cement is a blend of Portland cement and pozzolanic materials, such as fly ash or silica fume. It enhances concrete properties by improving workability, durability, and reducing heat of hydration. Pozzolan cement offers sustainable construction solutions and reduces the environmental impact of concrete production. Clinker Cement clinker is the intermediate product produced during the cement manufacturing process. It consists of finely ground materials, such as limestone, clay, iron ore, and shale, heated to high temperatures in a kiln. Clinker forms the basis of various types of cement when combined with gypsum and other additives.