MJRY-2 Creasing and Die-cutting Machine (With Inverter For adjust the speed) It is a kind of special equipment for all assortments of common card boards, corrugated boards, plastic sheets, leather products. It is suitable for printing, packing, decorating, plastic industries etc. with the features of firm structure, exquisite marking, greet cutting, high precision, ease of operation, safety and reliability etc. This Series Creasing and Die-cutting machine use Inverter to adjust the speed.
MJMQ-3 Rotatory Die-Cutting Machine (Chain model) Front Photo Back and side Photo Introduction MJMQ-3 Series Rotatory Die-cutting Machine is driven by chain. It is used for die-cutting corrugated paperboard and different kind atypic packages. The advantage of the machine is high efficiency, power save, good safety and so on. This machine use PU roller cover which is imported from Taiwan, the usage life is more than 10million times. The machine has the function of automatically line-speed compensation, this function makes the die-cutting size of the paperboard is exactly right even when the roller cover is attrited. The renovate structure 3times prolongs the life of the roller cover. The feeding system use chain transport. The operation and usage is very easy. Die-cutting part: 1) The roller uses high-grade steel, surface is abrasive with hard chromeplated. 2) Automatically revise the parallel, running stably. 3) Use PU roller cover which is imported from Taiwan. 4) The rubber roller have transverse 50mm moving system. 5) Automatic compensation of the line-speed means: the automatic compensation structure makes each batch carton size same after die-cutting without worker¡¯s operation. 6)The roller cover can automatically rehab, this prolongs the use life of the roller. Technological Parameters Model Max. Paperboard size(mm) Min. Paperboard size(mm) Thickness(mm) Main Power(kw) MJMQ-3-1600B 1600¡Á1350 300¡Á500 1-8(3-5layer) 4.0 MJMQ-3-1800B 1800¡Á1350 300¡Á600 1-8(3-5 layer) 5.5 MJMQ-3-2000B 2000¡Á1600 400¡Á600 1-8(3-5 layer) 7.5 MJMQ-3-2400B 2400¡Á1600 400¡Á700 1-10(3-7 layer) 7.5
It is the semiautomatic creasing and cutting machine by hand, and is consited of machine base, pressing frame, electromagnetic clutch transmission mechanism, electric control, automatic resetting device and automatic counter cutting. We design and manufacture different standard products according to the different operation requirements. They have merits of more functions, big pressure and easy operation. Adopt high quality materials (cast iron), which has high strength, to make the machine's body; Single electromagnetic clutch is quick and reliable; The operation height is placed reasonable, and the angle of pressing frame can open big; Adopt 4-shaft gear structure, the running is steady, the cutting power is strong and the noise is low; There are three functions :single cutting, continuous cutting, and working in delay time, the range of delaying can be adjusted.; The electric equipment is designed according to the standard of IEC; The safety protection system is reliable; Centralized lubrication system. Main Technical Parameters: Model: ML-1300, ML-1400, ML-1500 working area of platen(L*W): 1300x920mm, 1400x1000mm, 1500x1050mm working Speed: 14(time)/min3, 14(time)/min3, 13(time)/min3 Max.Length of Cutting: 40000mm, 40000mm, 45000mm Distance Adjusting: +5.5 27mm -5.5: +5.5 27mm -5.5: +5.5 27mm -5.5: Model of Paper Feeding: By hand Overall Dimensions(L*W*H): 2450x2050x1950mm, 2600x2050x1910mm, 2540x2010x1910mm Weight: 5600kg, 6500kg, 7500kg Motor Power: 5.5kw, 6.5kw, 7.5kw Wooden case.
This is machine is used to print, slot and die cut the finished corrugated cardboard. Customers can choose to add the slotting , die cutting part to their own demands.
Die cutting machines launched various sizes its all depends on customers demands 28"x40" , 4 ton approximately
Detailed product description The advanced paper feeding mechanism ensures high-speed running as well as stable and reliable performance. The imported italian pneumatic clutch and brake provides fast reaction, stability and reliability. High-accuracy intermittent mechanism (made in taiwan) ensures positional accuracy and stability. The loading/unloading paper mechanism improves production efficiency as it can be used without shutting the machine down. The use of the advanced electrical system ensures stability and reliability. Automatic adjustment of the measurement, leveling and pressure systems is also provided. The double-piece detection device uses a unique intelligent non-adjustment system. Main technical parameters: Mw1100: 1) max paper size (mm): 1, 100 x 800 2) min paper size (mm): 550 x 400 3) min paper notch: 5mm 4) max pressure (mt): 300 5) max paper thickness (mm): 0.2-1.5 6) max speed (s/h): 7, 000 7) main motor (kw): 15 8) average power consumption (kw): 20 9) gross weight (t): 18 Mw1050: 1) max paper size (mm): 1, 050 x 750 2) min paper size (mm): 450 x 370 3) min paper notch: 8mm 4) max pressure (mt): 300 5) max paper thickness (mm): 0.2-1.5 6) max speed (s/h): 7, 000 7) main motor (kw): 15 8) average power consumption (kw): 20 9) gross weight (t): 16 Ditto
Automatic die-cutting machine is very good to die-cut hologram sticker precisely and fast. It's suitable to die-cut hologram stickers in roll very precisely by tracing white register mark. It has slitter which can slit big hologram sticker roll into small rolls. Performance and Characteristics: Automatic anti-deviation when unwinding foil. It can improve precision of unwind to decrease deviation in horizontal direction Intelligent photo electricity location position ability. It can locate the right position of white register mark precisely Computer control technology. It's easily to set parameters for die-cutting according different speed and size of stickers Rotation ability of dit-cutting mold. It can help to adjust mold position precisely and can die-cut sticker in some special direction Rewind independently which improve to rewind the waste film smoothly Two sets reminder to help rewind small rolls after slitting smoothly Main Parameters: Die cutting width and length: a.200X200mm2 b.300X200mm2 Width of foil go through: 340 mm Die-cutting speed: 250 times/min (max) Register mark Positioning precision: 0.10mm Precision to rectify a deviation: 0.15 mm Max unwind Diameter: 500mm, Max rewind Diameter: 400mm Min slitting width: 12mm Thickness of liner: > 65/g glassine liner Power: 220V 2000W Dimension: 450mm*900mm*1400mm Weight: 700Kg
Max Paper Width: 850mm Max Speed: 250-300 Strokes/min Control System: Servo Motor Electric Power: 5 KW Net Weight: 2100 Kg Packed dimension: 3.15*1.8*1.9(L*W*H) speed: 180-250strokes/min PLC (Mitsubishi, Japan) Transducer (Mitsubishi, Japan) Servo motor (Mitsubishi, Japan)
Automatic die cutting machine R-850 Automatic Roll Die Cutting Machine is a kind of machine to make different shape half finished paper product or finished product for food paper containers.it is very popular and well sold in both home and overseas market. such as roll paper to paper cup fan. 1.using imported electric eye tracking servo motor feeding, ensure the feed speed and die-cutting speed synchronization. 2. according to the figure after printing die cutting or no text pattern die cutting, can be used to identify the color of light magic eye with servo motor, guarantee after printing product die-cutting die cutting location and pattern of perfectly.Die cutting for no printing products, as long as the die 3.cutting length can be on the microcomputer controller Settings. die cutting knife size is 880 mm * 283 mm (also can be made according to user requirements). 4.the highest die cutting speed can reach 12000 times per hour, has a very high production efficiency. 5. die shear force provided by the 4 kw variable frequency motor, not only save electricity and can realize stepless speed regulation, particularly with large flywheel to cooperate, make the die shear is large and stable, and further to save electricity. 6.adopts flat die cutting method, cutter plate for cheap.
Rotary Die Cutting Machine The VICUT VCT-LCR is a roll die cutting machine for fully automatic production of free-form labels and tags in short and medium quantities. With optical positioning system and professional software Label Studio, the device enables you cut labels, warning signs, logos and many others of any size. Roll cutting machine supplier:Anhui William CNC Technology Co.,Ltd Features: 1. Compatible with any roll to roll label printer, cut any shape prints.� 2. The layout software Label Studio will generate both file with register marks for printing and cutting. 3. Optical sensor positioning system scans register marks automatically, ensures contour cutting. 4. Automatic matrix removal system continuously weeds label waste for a clean, professional finish. 5. Automatic web tension bars provide highly stable die-cutting performance and registration for remarkable consistency. Rotary label die cutter Application: Field:� VCT-LCR is the perfect� label cutting machine for labels and tags of all shapes and sizes for small to medium quantities, making it an ideal flexible machine for use in large production sites, as well as small and medium-sized companies, such as the food and beverage industry. Our label rotary die cutting machine can fulfill all your needs in the field of product labeling. Materials:� stickers, glossy paper, PET, PP, PVC, PC, wall paper, material thickness up to 300gsm. WILLIAM CNC TECHNOLOGY is a Chinese manufacturer of digital flatbed cutter, label cutter, card cutter, trimmer and cutting plotter, having its own R&D center, production base, QC department, and global sales&service branch. Our brand VICUT registered in 2013 focuses on overseas market, to provide users post-press cutting machines with an affordable solution without sacrificing options or function.
