Torque SOR is a bespoke brokerage service, we are able to source and supply some of the worlds most sort after cars.
Model Number: RAD950Y Type: Synchronous Motor Phase: Three-phase Protect Feature: Waterproof AC Voltage: 540VDC Efficiency: IE 1 Product Name: Rawsun pmsm motor 185kw 950Nm electric car motor kits ev conversion Rated Power: 100kw Peak Power: 185kw Rated Torque: 500Nm Peak Torque: 950Nm Rated Speed: 1910rpm Peak Speed: 3500rpm Motor type: PMSM IP Grade: IP 68 Motor Weight: 165kg
Recommended for use at: 6.75 % by weight in suitable base oils to blend the following lubricants: Api sj Api cf Recommended for use at: 6.75 % by weight plus 0.25% by weight of lubrizol« 8696 in suitable base oils to blend the following lubricants: Api sl Api cf
X-TEAM sensored brushless motors have precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts. These motors are perfect for 1/10 size vehicles with plenty of power to spare.With X-team rc motors you can be assured that quality and performance has not been compromised and that these motors represent outstanding value. Instructions:Place of Origin: Dongguan Brand: X-TEAMItem Model :XTI-540Y Rated power :800(W)Product Type :Brushless DC Motor Rated Voltage :11.1(V) Efficiency: 90%Product Certification : CE& FCC &ROHS 3C rated voltage range: AC 36v or less Features:1. Hand-wound for maximum copper fill.2.Precision-balanced rotor will boost the efficiency and power performance of the motor.3.Nickel-plated neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.
When formulated with the appropriate base stock(s) and viscosity modifiers(s) that have been tested in accordance with the acc, atc and atiel product approval codes of practice meet the following requirements of:api sl api cf acea b2-98 issue 2 0.202t/cask
Basic Info Model NO.: BZP Certification: CE Product Name: Car Turntable Turning angle: 360degree Control System: Push Button, Remote Control or PLC Power source: 380V, 50Hz, 3P/220V, 3P/other local power Transport Package: As Required Products Introduction Electric motorized car turntable is a kind of turntable work with electric motorized car. Working principle: when the car runs on the turntable, turn the turntable automatically or with manpower to connect the railway on the turntable with the 90° turning railway, and then the car will run on the 90 degree turning railway. This kind turntable is suitable to be used on the annular railway and crossing railway for the equipment's producing line. The turntable system has the features of stable driving, high accuracy of rail connection and can be totally automatically operated. Products Features 1. Smooth and no noise; 2. Inverter and double limit switch control mode, the track accuracy greatly improved; 3. Large tonnage rotation support to do the main body to meet the large tonnage flat car conversion needs.
Warranty: 12 months Model Number: RAD16000 Type: Synchronous Motor Phase: Three-phase Protect Feature: Waterproof AC Voltage: 576VDC Efficiency: - name: NEW 16360Nm 300kw electric ac motor ev drive car kit Motor Type: PMSM motor rated: 180kw motor peak: 300kw rated torque: 850Nm peak torque: 1950Nm peak speed: 3500rpm Transmission ratio: 4 Gear AMT Protection level: IP67 Cooling method: Liquid Cooling
Product Introduce The kinds of electric motorized transfer car, which is powered by conducting rail, two phase, AC 36V safe voltage, to connect the two railway respectively. The car's wheels and conducting plate lead the AC 36V electricity to the electrical appliance box which is installed on the cart. And AC 36V is transformed to AC380V through transformer. Then control AC motor through AC control system to make the electric motorized transfer car start, stop, go forward, back forward an so on. The electric motorized transfer cars are no limitation of cable, it can get powered from railway in any time. However, it is has strict requirement for the railway, which have to be insulated. (its railway is insulated with the ground, and its wheels are insulated with the ground.) Cart Frame The vehicle frame is two longitudinal beam, several beams with steel panel welded together, which adopts box beam structure according to the crane principle and combined with the design of the cars. Its main feather: large load bearing, little table deformation, long service lifetime.. Railway Wheel About the electric motorized transfer car' wheel, it is single rim of corner case, the material is ZG55, or can be customized as per your demand. It can improve the load capacity and install easily. And the wheel are manufactured and assemblied by ourselves. Lifting Hole The lifting hole are installed on the electric motorized transfer car for convenient transporting. Especially, it can be lifted and moved after the structure finished. What's more, it makes the appearance more delicate and beautiful. Sound & Light Alarm For safe running, it is installed on the electric motorized transfer car, it will ring continuously to warn someones when the electric motorized transfer car start running. Of course, the other parts can be installed, as dead man stop, emergency stop, anti-colliding switch... all can be meet only you'd like by our professional team. url:http://www.newld-transfercar.com
Products Introduction About the motorized transfer car, it is an electric transfer car powered by towing cable which is laid on the ground. The cable line is placed between the two rails or oneside. The operation system is low voltage 36V power. It has widely applied in the industry transportation field all over the world. Our electric transfer car is available in a number of configurations specifically designed to suit the needs of our customers. Car Frame The frame adopts box beam structure according to the crane principle and combined with the design of the motorized transfer car. It is with large load capacity, long service lifetime. Besides, not easy deformation and can effectively ensure the smooth of the platform. Railway Wheel About the electric transfer car's wheels, it is double rim of corner case, the material is ZG55, or can be customized as per your demand. It can improve the load capacity and install easily. And the railway wheels are manufactured and assemblied by ourselves. Three In One Reducer & AC Motor This type gear box with advantage of high efficiency, operate steadily, easy installation and maintenance, etc; Brake is composed by brake frame, brake parts, brake operating device and so on, it is a safety device to ensure the electric transfer car working safely; The electric motor is AC motor.