Brass Round Bar is commonly used in electrical application, high strength tooling material and ornamental decoration. Moreover, there is a large variance in alloy composition giving Brass Round Bar an enormous variety of purposes and possibilities.
Product Detail
H62 brass is an ordinary brass with an average copper content of 62%. It has good mechanical properties, good plasticity in hot state and cold state, good machinability, easy brazing and welding, corrosion resistance, but easy to produce corrosion cracking. In addition, the price is cheap, and it is an ordinary brass variety widely used. H62 (i.e. four or six brass). At room temperature β Compare α The phase is much harder, so it can be used for parts bearing large loads. α+β Two phase brass can be hot worked above 600 â??. α+β Microstructure of two-phase brass: α It is a bright white solid solution, β It is an ordered solid solution based on CuZn. The inhibition effect of strong electric field on the spatiotemporal cavity of H62 brass during high temperature deformation.
chemical composition
Copper (Cu): 60.5 ~ 63.5%
Iron (FE): ≤ 0.15%
Lead (PB): ≤ 0.08%
Antimony (sb): ≤ 0.005%
Bismuth (BI): ≤ 0.002%
Phosphorus (P): ≤ 0.01%
Zinc (Zn): surplus
Total impurities: ≤ 0.5%
Application: it can be used as various stressed parts made by deep stretching and bending, such as pins, rivets, washers, nuts, conduits, barometer springs, screens, radiator parts, etc.
Mechanical properties:
Tensile strength: ≥ 315
Elongation: ≥ 30
Note: tensile mechanical properties at room temperature of other wires except those for lock and clock making
Heat treatment specification:
Hot working temperature 650 ~ 850
Annealing temperature 600 ~ 700
The low-temperature annealing temperature for eliminating internal stress is 270 ~ 300
Specifications and dimensions can be customized according to your requirements.
Leveraging on our vast industry experience and knowledge, we have engaged in providing high quality Brass Plate Rod Hex. Comes with powder coating to offer high resistance against friction, offered plate rod hex is offered in several specifications to choose from. This plate rod hex is designed with top class brass and advanced technology under the direction of our skilled personnel. Customers can avail this plate rod hex from us at industry rates.
We manufacture Brass Neutral Links according to the customer's drawings or specifications.
Size:
Begins from M2 or equivalent threads and up to any size
Also available as per custom design or requirement
Material:
Free Cutting Brass IS 319 Type (I) or
Free Cutting Brass As Per BS 249 Type (I) or
High-Grade Free Cutting Brass
Any special brass material composition as per customer's requirement
Finish And Coating:
Natural, Nickel Plated, Tin Plated, Natural Brass or any coating as per customer specification.
Brass sliding bar.The MT777 sliding bar is pretty good.
This kind of sliding bar sells well.Most of them are exported to Europe.
We are the manufacture for shower related products:shower head,hand shower,shower arms,etc.
192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel.
Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material
A192
Thickness
0.1mm-300mm or as required
Standard
AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique
Hot rolled,cold rolled
Surface Treatment
Clean, blasting and painting according to customer requirement
Thickness tolerance
�±0.1mm
Application
It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time
Within 7-15 workdays after receiving deposit or L/C
Export packing
Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity
250,000 tons/year
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.
Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material
ST37
Thickness
0.1mm-300mm or as required
Standard
AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique
Hot rolled,cold rolled
Surface Treatment
Clean, blasting and painting according to customer requirement
Thickness tolerance
�±0.1mm
Application
It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time
Within 7-15 workdays after receiving deposit or L/C
Export packing
Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity
250,000 tons/year
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
