We are offering fiber glass epoxy sheets. These sheets are made of electrical alkali-free glass cloth impregnated with epoxy resin by processing under pressure and heat. Our fibre glass epoxy sheets have high mechanical properties at medium humidity and good dielectric stability at high humidity. They are applied to the mechanical lines, electron lines and electrical appliance lines.
Glass fiber Fiber made from melted glass that is drawn into a thin fiber less than a thousandth of an inch in diameter. The fiber may be spun into threads and woven into fabrics which suitable for many applications, such as removal of micron and submicron size particulates from both liquids and gases or used in an acoustic, electrical, or thermal insulating material. Feature: 1.Lightness, heat resisting, low thermal capacity and low thermal Conductivity, soft and excellent fire-isolation. 2.Anti-heat energy and heat stability. 3.Anti-mildew, anti-insect, un-scattered and good stretching Resistance. 4.Excellent anti-ageing. 5.Excellent sound absorbability, adsorption and filtering. 6.It can be cut, sewn according to requirements and it's also easy to Construct. Application: 1.These products are widely used for wrapping material of all kinds of heat source (coal, electricity, oil, and gas) and heat-presentation Of central air-conditioning pipelines. 2.It can be used as the materials for heat-isolation and fire -resistance. 3.It can be used as the materials for seal, sound absorption filtering and insulation. 4.Excellent material for heat-conducting, heat-presentation. 5.It can be used as materials for sound isolation, heat insulation 6.It can also be used for touching fire and all kinds of flue in which the temperature is less than 600f¦.
Epoxy resin fiberglass filament wound tubes are made of non-stop fiber wet winding. It is specially developed for high-voltage electrical equipment structural parts such as reactor, lightning arrester, fuse, transformer, on load tap changer, transformer,etc.
Epgc201/202/203/204/306/308 epoxy glass fiber sheet The product adopts 7628 glass fiber cloth impregnated with epoxy resin by hot pressing. It has high mechanical and electrical properties, good heat resistance and humidity resistance. Products are widely used on mechanical, electronic and electrical equipment as components of insulation parts. The product have higher mechanical properties, electrical properties and high thermal mechanical strength. Iec Characteristic Epgc201 High mechanical and electrical properties, good heat resistance, moisture resistance. Epgc202 Fr4 Performance is similar to epgc201; the flame retardance level is improved to ul f-v0. Epgc203 G10 Performance is similar to epgc201 and it has advanced heat resistance, high mechanical strength at high temperature, excellent electrical and anti-static properties. Epgc204 Fr5 Performance is similar to epgc203; the flame retardance level is improved to ul f-v0. Epgc306 G11 Performance is similar to epgc203 and its proof tracking index is improved. Epgc308 Performance is similar to epgc203 and its heat resistance is improved. It has well mechanical stability at high temperature.
Model HW-200/HW-400 Power supply 3 AAA batteries Definition 0.5um(International standard:2um) Weight 0.6kg Adapter interface 2.5mm,1.25mm
Fiber glass screen Features: 1) well ventilated, well transparent, easy washing, anticorrosive, and Burn-resistant 2) has strong tensile force, stable shape and long service life as well as Straight feeling 3) the popular carbon makes vision more comfort and natural 4) has graceful and generous appearance, applicable for ventilation and Insect proof in construction, orchards and ranches Specifications: 1) standard mesh: 20 x 20, 18 x 18, 16 x 16, 18 x 16, 18 x 14, 16 x 14" 2) standard color: white, black, grey, or other colors according to Customers' requirements 3) standard width: 24" - 108" 4) customized orders with different width, colors or length are available to Meet customers' specific requirements
Mesh size:3x3mm 4x4mm 5x5mm 10x10mm Weight:80-160g Length:10m-100m Width:20cm-200cm Color:white, orange, blue, etc.. Weave type:plain woven Yarn type:c-glass Coated:Latex,Urea-formaldehyde glue Packaging details 1. Shrink only. 2. Shrink and woven bags. 3. By shrink film first each roll, then put into carton
SUNBOW has a glass fiber tube SB-SGS-40 series, which is very suitable for high-voltage insulation of drive motors of new energy vehicles. The test was conducted at the Mercedes-Benz headquarters. After 30 days of continuous operation of the fiberglass tube on the lead of the drive motor, the fiberglass tube did not crack. Among domestic brands, only SUNBOW did it and eliminated all competitors. Among the insulating sleeves for new energy vehicle applications, most manufacturers are currently competing in the project of driving motors, but SUNBOW has developed the SB-SGS-40 series first, and its advantage is that SUNBOW insists on using it. Alkali-free and sodium-free glass fiber yarn and a certain brand of silica gel imported from Germany. After the tube is formed by the special weaving process of SUNBOW, the glass fiber tube yarn is tight and moderate, and the surface is smooth, which lays the foundation for the subsequent coating process. The toughness of German silicone raw materials is more than twice that of domestic silicone. With the help of a proprietary formula, the coated glass fiber tube has a brighter color, and its wear resistance and tear resistance are more than twice higher than those of the same industry. The temperature resistance reaches 260 degrees, and the temperature resistance of domestic counterparts is 200 degrees. The SB-SGS-40 series are mostly used in new energy vehicles. Therefore, there are not many domestic manufacturers with its production capacity. Many customers who find SUNBOW value whether the manufacturer has large-volume production capacity. SUNBOW has two factories in Shenzhen and Dongguan, with an output of 8.4 million meters per month. This is in a far leading position among domestic counterparts. At the Berlin exhibition in Germany in May 2019, the technical director of Mercedes-Benz headquarters directly tested the wear resistance and tear resistance of the SUNBOW fiberglass tube on the spot and found that the SUNBOW fiberglass tube exceeded many domestic and foreign manufacturers. At this time, the customer has already seen the capabilities and strengths of SUNBOW, and used SUNBOW fiberglass tubes in a recent new energy vehicle drive motor project.
Epoxy Glass Fiber Winding Tube 360 EPCF52 Description: This product adopts fiber glass yarn that is impregnated with insulation jelly made of epoxy resin and other resins by certain proportion, and then it is rolled in wet method, and dried and finally consolidated by baking. Its heat resistance level is up to Class H, and it also has excellent electrical and mechanical properties, chemical resistance (SF6), low dielectrical loss, no deformation or delamination. It can be used as main insulator on H grade dry-type transformer, load tap changer, electricâ??reactor, lightning arrestor, SF6 inductor, etc. Technical Data Standardï¼?GB/T 5132.1-2009 IEC61212-1:2006 No. Properties Unit Value 360/EPCF52 1 Density g/m1.85-2.00 2 Vertical Bending Strength (normal) MPa 400 3 Axial Compressive Strength MPa â?¥150 4 Parallel Breakdown Voltage (90 â?? of transformer oil) Kv â?¥40 5 Vertical Electrical Strength (90 â?? of transformer oil) 1mm Kv/mm â?¥11.6 6 Surface Voltage Resistance after Wetting kv â?¥12 7 Insulating Electrical Resistance after Wetting Ω â?¥1.0*10^9 8 Dielectric Loss Factor (50Hz) - â?¤0.05 9 Water Absorption ï¼? â?¤1 10 Partial Discharge PC â?¤5 11 Temperature Index - 180
*Description* This rovings Fiber Glass is a high-tech reinforcement for long fiber polyamide (PA) processes such as granulate long fiber thermoplastic (GLFT) and direct long fiber thermoplastic (DLFT). This rovings offer a hydrolytic stability in high performance applications. Each package is in a wrap film with each pallet stretch wrapped to protect the fiber glass roving from dirt and moisture. *Processing advantages* Excellent spreadability of the roving filaments in thermoplastic pultrusion allowing complete resin impregnation. Sizing on the fiber surface has been tailored to provide optimal balance of dry strength, fiber resin wetting and minimal sizing rub-off on process contact points. Available in outside and inside payout. Excellent processing in pultruded GLFT processes for molding of high performance long glass PA end products. Excellent wet out and saturation in polyamide (PA) resin. Highest mechanical as-molded properties with best-in-class long-term hydrolytic stability. KOHLI POLYMERS GMBH
