Soney

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

Containers shall comply with following in their latest editions : 1) ISO/TC-104 668 - Series 1 freight containers-Classification, external dimensions and ratings 6346 - Coding, identification and marking for freight containers 1161 - Specification of corner fittings for series 1 freight containers 1496/1 - Specification and testing of series 1 freight containers. Part 1 : General cargo containers for general purposes 830 - Freight containers-Terminology. 6359 - Freight containers-Consolidated data plate 2) The International Union of Railway (UIC) code 592 OR. 3) The Customs Convention on the International Transport of Goods(TIR). 4) The International Convention for Safe Containers (CSC). 5) Transportation Cargo Containers and Unit Loads Quarantine Aspects and Procedures by Commonwealth of Australia Department of Health. (TCT) 6) provide certificates from classification society (BV, ABS, GL, CCS, LR, KR). The specifications of 20â?? one side full access containers: 1 Dimension External Dimensions Internal Dimensions Length 6,058 ( 0, -6 ) mm 5,898 ( 0, -6 ) mm Width 2,438 ( 0, -5 ) mm 2,288 ( 0, -5 ) mm Height 2,591 ( 0, -5 ) mm 2,254 ( 0, -5 ) mm 2 End Door Opening Width .................. 2,280 ( 0,-5 ) mm Height ................... 2,140 ( 0,-5 ) mm 3 Side Door Opening Width .................. 5,700 ( 0,-5 ) mm Height ................... 2,140 ( 0,-5 ) mm 4 Fork Pocket Width .................. 360 mm Height ................... 115 mm Center distance ....... 2,080 mm 5 Inside Cubic Capacity 30.5 cu.m 6 Rating Maximum Gross Weight .............. 24,000 kg Maximum Payload ............. 20,850 kg Tare Weight ............... 3,150 kg

SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

A used shipping container, commonly referred to as a "used container," is a large, steel storage container originally designed for the transport of goods via ships, trucks, or trains. These containers, often made from durable corten steel, are repurposed for various applications once they've reached the end of their shipping life. They come in standard sizes, such as 20-foot and 40-foot lengths, and can be modified or customized to meet diverse storage and construction needs, including mobile offices, housing, retail spaces, and more. Used shipping containers are sought after for their robust construction, mobility, and cost-effectiveness, making them a sustainable and versatile solution in various industries and for creative architectural projects.