* A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 â?³ - 28 â?³, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A106Gr. B
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment
* Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application :
* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing
* Waterproof paper, and steel strip packed.
* Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts
* The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
* A179 is a steel grade produced according to American ASTM standards, which belongs to American standard. A179 Carbon steel round bar is applicable to cold drawn high-quality low-carbon seamless steel pipe for heat exchanger and condenser.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A179
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application :
* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
* A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
* Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A53
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
* The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Application field
* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.
AISI304 ss round solid free cutting stainless steel bar
Product Stainless steel bar/round, flat, angle, hex etc.
Diametre 2mm~500mm
Length As customer's requirements
Surface Black & pickled & bright & hair line
Grade 200 series& 300 series& 400 series
Standard ASTM A276, AISI,GB/T 1220, JIS G4303
Application These products are widely used in all kinds of architecture and engineering structure
operation
Main steel grade
Available size(mm) Monthly capacity(mt) Length(mm)
OEM Stainless steel 40~500 1500 4000~8000
Hot 303 303Cu 304/L 310S 316/L 321 416 420 12 ~200 3000 4000~7000
17-4PH WLA510
ST Bar 321 304/L 316/L 310S 17-4PH WLA510 19~110 2000 4000~7000
CD
Bar
1) All products are made of high-quality imported raw materials.
2) Our products are certified by ISO9001:2008 authentication quality systems.
3) Excellent high temperature strength and work-hardening
Trade details (kindly need your attention):
1) Above all, in your inquiry, besides the diameter , please indicate clearly: the material of your required bar; your requirement of surface polishing or not having; your requirement of fixed-length for each bar or not having. Because those are aslo key to calculating our cost and telling you prices for your ordered bars.
2) Bars can be charged by metric ton
3) Packing: standard export packing.
4) Payment:by L/C sight or T.T against copy of B/L.
5) Shipment:20-30 days after receipt of the down payment or Irrevocable L/C sight.
AISI304 ss round solid free cutting stainless steel bar
Product Stainless steel bar/round, flat, angle, hex etc.
Diametre 2mm~500mm
Length As customer's requirements
Surface Black & pickled & bright & hair line
Grade 200 series& 300 series& 400 series
Standard ASTM A276, AISI,GB/T 1220, JIS G4303
Application These products are widely used in all kinds of architecture and engineering structure
operation
Main steel grade
Available size(mm) Monthly capacity(mt) Length(mm)
OEM Stainless steel 40~500 1500 4000~8000
Hot 303 303Cu 304/L 310S 316/L 321 416 420 12 ~200 3000 4000~7000
17-4PH WLA510
ST Bar 321 304/L 316/L 310S 17-4PH WLA510 19~110 2000 4000~7000
CD
Bar
1) All products are made of high-quality imported raw materials.
2) Our products are certified by ISO9001:2008 authentication quality systems.
3) Excellent high temperature strength and work-hardening
Trade details (kindly need your attention):
1) Above all, in your inquiry, besides the diameter , please indicate clearly: the material of your required bar; your requirement of surface polishing or not having; your requirement of fixed-length for each bar or not having. Because those are aslo key to calculating our cost and telling you prices for your ordered bars.
2) Bars can be charged by metric ton
3) Packing: standard export packing.
4) Payment:by L/C sight or T.T against copy of B/L.
5) Shipment:20-30 days after receipt of the down payment or Irrevocable L/C sight.
AISI304 ss round solid free cutting stainless steel bar
Product Stainless steel bar/round, flat, angle, hex etc.
Diametre 2mm~500mm
Length As customer's requirements
Surface Black & pickled & bright & hair line
Grade 200 series& 300 series& 400 series
Standard ASTM A276, AISI,GB/T 1220, JIS G4303
Application These products are widely used in all kinds of architecture and engineering structure
operation
Main steel grade
Available size(mm) Monthly capacity(mt) Length(mm)
OEM Stainless steel 40~500 1500 4000~8000
Hot 303 303Cu 304/L 310S 316/L 321 416 420 12 ~200 3000 4000~7000
17-4PH WLA510
ST Bar 321 304/L 316/L 310S 17-4PH WLA510 19~110 2000 4000~7000
CD
Bar
1) All products are made of high-quality imported raw materials.
2) Our products are certified by ISO9001:2008 authentication quality systems.
3) Excellent high temperature strength and work-hardening
Trade details (kindly need your attention):
1) Above all, in your inquiry, besides the diameter , please indicate clearly: the material of your required bar; your requirement of surface polishing or not having; your requirement of fixed-length for each bar or not having. Because those are aslo key to calculating our cost and telling you prices for your ordered bars.
2) Bars can be charged by metric ton
3) Packing: standard export packing.
4) Payment:by L/C sight or T.T against copy of B/L.
5) Shipment:20-30 days after receipt of the down payment or Irrevocable L/C sight.
AISI304 ss round solid free cutting stainless steel bar
Product Stainless steel bar/round, flat, angle, hex etc.
Diametre 2mm~500mm
Length As customer's requirements
Surface Black & pickled & bright & hair line
Grade 200 series& 300 series& 400 series
Standard ASTM A276, AISI,GB/T 1220, JIS G4303
Application These products are widely used in all kinds of architecture and engineering structure
operation
Main steel grade
Available size(mm) Monthly capacity(mt) Length(mm)
OEM Stainless steel 40~500 1500 4000~8000
Hot 303 303Cu 304/L 310S 316/L 321 416 420 12 ~200 3000 4000~7000
17-4PH WLA510
ST Bar 321 304/L 316/L 310S 17-4PH WLA510 19~110 2000 4000~7000
CD
Bar
1) All products are made of high-quality imported raw materials.
2) Our products are certified by ISO9001:2008 authentication quality systems.
3) Excellent high temperature strength and work-hardening
Trade details (kindly need your attention):
1) Above all, in your inquiry, besides the diameter , please indicate clearly: the material of your required bar; your requirement of surface polishing or not having; your requirement of fixed-length for each bar or not having. Because those are aslo key to calculating our cost and telling you prices for your ordered bars.
2) Bars can be charged by metric ton
3) Packing: standard export packing.
4) Payment:by L/C sight or T.T against copy of B/L.
5) Shipment:20-30 days after receipt of the down payment or Irrevocable L/C sight.
