Basic Info.
Model NO.
LFP51.2-300
Electrolyte
LiFePO4
Color
White
Usage
Solar/ Marine/ Telecom / Electric Mobility
Warranty
3 Years
OEM/ODM
Acceptable
Package
Carton and Pallet
Lead Time
20-30 Days
Dimension
720*260*580mm
Transport Package
Wooden Case
Specification
120kg
Trademark
PUSTUN
Origin
China
HS Code
8507600090
Production Capacity
5000
Product Description
Product Description
Factory Wholesale Deep Cycle 51.2V300ah Lithium Ion Batteries LiFePO4
Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect.
Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery.
Product Parameters
Nominal Voltage 51.2V
Nominal Capacity 300Ah
Energy 15.36KWh
Combination mode 16S1P
Cycle Life â?¥6000 Cycle, 80%DOD, 25�ºC
BMS con�guration 16S150A
Operating voltage range 41.6V~59.2V
Rated charge and discharge current 150A
Peak current 160A Continue @170A 3s
Rated charging and discharging power 7.68Kw
Peak power 8.192Kw Continue @8.704Kw 3s
Short-circuit current 0.762Ka@100us
Communication mode CAN, RS485
Parallel number Recommend 6 in parallel(Maximum support 16 in parallel)
Remote data Bluetooth optional/Wi�
Weight 120kg
Dimensions (L*W*H) mm 720*260*580mm
Operating temperature Charging: 0�ºC~+50�ºC / Discharge: -10�ºC~+60�ºC
Relative humidity 0~95%
Storage temperature <3 Months -10�ºC~25�ºC / <1 Year 0�ºC~25�ºC
Maximum working altitude 2000m
Class of protection IP21
Supports inverter communication brands SMA/Growatt/TBB/Deye/GOODWE/Huawei/Schneider/Victon energy/SOFAR/INVT
Installation mode Floor mounting
Power cable outlet mode Behind
Standards and certi�cation Transport UN38.3
Note Rated charge and discharge current and power will change due to temperature and SOC.
Basic Info.
Model NO.
LFP25.6-100
Electrolyte
LiFePO4
Color
White
Usage
Solar/ Marine/ Telecom / Electric Mobility
Warranty
3 Years
OEM/ODM
Acceptable
Package
Carton and Pallet
Lead Time
20-30 Days
Dimension
750*145*250mm
Transport Package
Carton
Specification
28kg
Trademark
PUSTUN
Origin
China
HS Code
8507600090
Production Capacity
5000
Product Description
Product Description
25.6V100ah Renewable Energy Lithium Ion LiFePO4 Battery
Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect.
Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery.
Product Parameters
Nominal Voltage 25.6V
Nominal Capacity 100Ah
Energy 2.56KWh
Combination mode 8S1P
Cycle Life â?¥6000 Cycle, 80%DOD, 25�ºC
BMS con�guration 8S100A
Operating voltage range 20.8V~29.6V
Rated charge and discharge current 100A
Peak current 100A Continue @120A 3s
Rated charging and discharging power 1.28Kw
Peak power 2.56Kw Continue @3.072Kw 3s
Short-circuit current 0.225Ka@100us
Communication mode CAN, RS485
Parallel number Recommend 6 in parallel(Maximum support 16 in parallel)
Remote data Bluetooth optional/Wi�
Weight 28kg
Dimensions (L*W*H) mm 750*145*250mm
Operating temperature Charging: 0�ºC~+50�ºC / Discharge: -10�ºC~+60�ºC
Relative humidity 0~95%
Storage temperature <3 Months -10�ºC~25�ºC / <1 Year 0�ºC~25�ºC
Maximum working altitude 2000m
Class of protection IP21
Supports inverter communication brands SMA/Growatt/TBB/Deye/GOODWE/Huawei/Schneider/Victon energy/SOFAR/INVT
Installation mode Wall hanging/Floor mounting
Power cable outlet mode Upper
Standards and certi�cation Transport UN38.3
Note Rated charge and discharge current and power will change due to temperature and SOC.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include:
low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for
sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc.
Advantages of Ferrite Magnet:
Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging.
Advantages of Sintered NdFeB Magnet :
1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature;
2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet;
3. High cost performance.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance.
â?¢ Advantages of SmCo Magnet:
1.Superior resistance to high temperature.
2. Excellent resistance to corrosion, no coating is needed for surface protecting.
3.High working temperature.
4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances.
â?¢ Advantages of AlNiCo Magnet:
1.Customized designs are available.
2.Max working temperature can be as high as 550�°C.
3.Disadvantage: Br and BH(max)are not as high as rare earth magnet.
4.High energies and relatively low coercivity.
5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Flexible magnets are low-cost extruded permanent magnets made by bonding a strontium magnetic powder ina flexible vinyl binder. Microcrystalline magnetic powder of flexible magnet leads to its high magneticperformance, and artificial rubber makes it very flexible. Its maximum magnetic energy product has reached 90KJ/ m3 (11.25MGOe), industrial mass production magnetic performance range of 16 to 68KJ/m3(2.0~8.5MGOe).Due to its excellent flexibility, it can assemble faster than molded magnets. Flexible magnetic sheets, magnetic strips and labeling magnets are easy to use and manipulate to your desired specifications.
Advantages of Flexible Magnet:
Flexible magnets are easy to use, easy to manipulate, low cost and extremely versatile. They can easily be cut, bent,twisted, slit, or coiled and adhere to multiple items and surfaces. In addition, flexible magnetic materials require no surface treatments so no special precautions need to be taken to protect the magnetic surface. Our simple sheet on Care Tips will ensure that the use of magnetic sheeting on vehicles will not mar paint finishes.
Technical Data of Flexible Magnet:
Shapes: Rolls or Sheeting & Strips
Magnetization: Axially Magnetized
Br: 1,600 Gauss
BHmax:0.60 MGOe
Hc: 1,370 Oersted's
Max Operating Temperature:212F/100
Density(lb/in3): 0.133
