These types of Different Drilling Air Tool We are Exporting in the Global Market,
Explorer60 is full hydraulic drill rig for coring and drilling for underground galleries and surface. It can be built in different frames such as regular skid frame, three wheel trailer and hydraulic crawlers narrow or wide. Explorer60 also can be built in different feed lengths for different purposes. It has hydraulic regulated spindle to control speed of rotation between 166 rpm to 1000 rpm step less. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer60 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods. For stabilization it has hydraulic jacks at the top of the feeding frame. Explorer60 has also optional accessories such as larger wire line hoist, cathead or two step hydraulic water pump.
Explorer30 is the small hydraulic drill rig for coring and drilling for narrow tunnels, underground galleries and surface. It has small built so that easy to install and carry. It has hydraulic regulated spindle to control speed of rotation between 350 rpm to 2200 rpm step less. It can be operated with one person. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer30 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods.
1. Drilling machine full hydraulic drive, easy operation and flexible, easy to shift, good mobility, saving time and effort; 2. Drill rotator with dual hydraulic motor drive, the output torque, greatly improving the drilling rig rigidity; 3. The new angle mechanism makes the hole more convenient, adjust the scope of larger, can reduce the requirements of the face; 4. With a dedicated drill pipe with drill (drill pipe, sleeve, eccentric drill, etc.), in the unstable formation with casing wall openings, conventional ball teeth drill hole; 5. The rig can be directly connected with the hydraulic station, the structure is simple; the hydraulic station frame is equipped with a roller, which is easy to move and relocate. The engine is composed of three parts: host, hydraulic station and console.
Product Introduction 1. Drills up to 100-200m deep, 75-500mm diameter. 2. Full hydraulic system and crawler mounted, easy to operate and move. 3. Drill on soil, sand, rock, quarry, marble and any hard ground. 4. Used to drill for water well, geological exploration, soil sample taking, SPT Test, etc. Main features 1. Hydraulic-control drill mast,can be raised and put down by hydraulic cylinders, which saves time and worker labor. 2. Rubber track, the weight is lighter and does not hurt urban road, suitable for projects in city. 3. Four hydraulic jacks, can lift the machine to mas height 1.3m, so that the machine can be loaded from truck compartment. Also they can be used for rig leveling and support at work. 4. 24V electric-start diesel engine reduces the operator's labor intensity. 5. Independent BW-160 mud pump , has bigger flow displacement and pressure, easy maintenance. 6. Optional installation of hydraulic twist tube machine(75-168mm)imporve work efficiency and reduce labor costs.
Product Description: 1.general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2.With hydro-automatic feeding device, and high drilling efficiency. 3.Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4.Close levers, convenient to operate, safe and reliable operations. 5.Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6.Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas. Product Parameter: rated drill depth 200m open hole diameter 200mm, max. 300mm spindle rotation speed 118/236/505/1010 rpm max. output torque 1500 N.m max. lifting weight (single wire) 17 KN drill rod diameter 42/50 mm hole angle 90~75º size (L x W x H) 1433 x 697 x 1273mm weight 500 kg diesel model S1100
Product Features: Spindle type mechanical transmission, hydraulic feed. Hydraulic retracting lets drill body away from the drilling hole. Hydraulic chuck, hand-powered chuck and hand-powered cylinder chuck, they are exchangeable. Friction hoist, percussion drilling, easy to pull and push casing if equipped with vibrator. Advanced design, reasonable arrangement, compact structure, beautiful looking. Light weight, good detachability, easy to operate. Equipped with special 6mA type derrick for user ordering. Product Parameter: Drilling depth 200m Hole(Drill bit) diameter (mm) Φ115-350 Adaptable formations Loose soil and bedrock (Hardness f=6~20) Drilling method Top drive rotation, hydraulic feeding, work with mud pump or DTH hammer Rotary speed (rpm) 60�160 Torque (N.m) 5000�6500 Feeding force (Ton) 8 Lifting force (Ton) 16 Tool winch lifting force (Ton) 1.5 Drill pipe dia. Φ76/Φ89 Drill pipe length 3000 Air pressure (Mpa) 1.05-2.46 Air consumption (m3/min) 16-35 Diesel engine YN33GBZ Engine parameter 65kW/2400rpm Walking speed 0�2.5 Climbing capacity 20 Distance from ground 250 Dimension (mm) 4000x1900x2600 Unity weight (kg) 6000
1.Brief introductions of SH30-2A exploration drilling rig SH30-2A exploration drilling rig is modified and designed on the basis of SH30 exploration drilling rig. The exploration drilling rig can be used for the covering layer of fourth Century, such as soil, clay, sand and gravel, and all kinds of mixed soil and fill. It is mainly used in the exploration of gold sand, industrial buildings and civil buildings as well as highway, railway, bridge and other engineering geological prospecting work. 2.Features of SH30-2A exploration drilling rig SH30-2A exploration drilling rig is simple operate and has high degrees of mechanization. With light weight, compact structure, good disintegration performance and convenient handling, the SH30-2A exploration drilling rig can be removable in the mountain area and is equipped with a pair of rubber wheels. The machined can be towed between different drilling holes on constructions site. . 3.Applications of SH30-2A exploration drilling rig The SH30-2A exploration drilling rig has two kinds of drilling methods: impact and rotation. Therefore, the drilling tools of the drilling machine are divided into two kinds: impact tools and rotary tools. In order to meet the customer's individualized demand, the drilling tools are equipped in accordance with the demand , and the standard configuration does not include the rotary drilling function. 4.Impact tool of SH30-2A exploration drilling rig The tools used for impact drilling include lifting joints, weighting rods, impact rods, guiding pipes and impact drills. When the soil sample is used, the drilling tool used is the same as above, but only the impact bit is changed into a soil sampler. Using sand cylinder for sand gravel and other tools are lifting joint, rod, movable joint, sand lifting cylinder. When drilling in sand and pebble layer, casing must be lowered to protect the hole wall and prevent collapse. With complete free chain clamp c 5.Rotary tool (Not include in standard configuration). Rotary Table, Auger Drilling Pipe, Rotary Table Pipe Adapter, 6.Specifications of SH30-2A exploration drilling rig SH30-2A exploration drilling rig Drilling depth 30m Drilling pipe diameter 42mm Aperture diameter 142mm End hole diameter 110mm Drill form and vertical height 4 legs, 6m Power Motor Y132S2-2/ 7.5kw/3000 r/min Diesel engine D180Z/ 8hp/2400 r/min Windlass Lifting speed 0.24/ 0.57/1.48m/s Maximum lifting power (single rope, low speed) 15kn Turntable Diameter 150mm Turntable speed 18/44/110r/min Dimension Length*width*height 1780*1010*900mm Weight 500kg
1.Brief introductions of SH30-2A exploration drilling rig SH30-2A exploration drilling rig is modified and designed on the basis of SH30 exploration drilling rig. The exploration drilling rig can be used for the covering layer of fourth Century, such as soil, clay, sand and gravel, and all kinds of mixed soil and fill. It is mainly used in the exploration of gold sand, industrial buildings and civil buildings as well as highway, railway, bridge and other engineering geological prospecting work. 2.Features of SH30-2A exploration drilling rig SH30-2A exploration drilling rig is simple operate and has high degrees of mechanization. With light weight, compact structure, good disintegration performance and convenient handling, the SH30-2A exploration drilling rig can be removable in the mountain area and is equipped with a pair of rubber wheels. The machined can be towed between different drilling holes on constructions site. . 3.Applications of SH30-2A exploration drilling rig The SH30-2A exploration drilling rig has two kinds of drilling methods: impact and rotation. Therefore, the drilling tools of the drilling machine are divided into two kinds: impact tools and rotary tools. In order to meet the customer's individualized demand, the drilling tools are equipped in accordance with the demand , and the standard configuration does not include the rotary drilling function. 4.Impact tool of SH30-2A exploration drilling rig The tools used for impact drilling include lifting joints, weighting rods, impact rods, guiding pipes and impact drills. When the soil sample is used, the drilling tool used is the same as above, but only the impact bit is changed into a soil sampler. Using sand cylinder for sand gravel and other tools are lifting joint, rod, movable joint, sand lifting cylinder. When drilling in sand and pebble layer, casing must be lowered to protect the hole wall and prevent collapse. With complete free chain clamp c 5.Rotary tool (Not include in standard configuration). Rotary Table, Auger Drilling Pipe, Rotary Table Pipe Adapter, 6.Specifications of SH30-2A exploration drilling rig SH30-2A exploration drilling rig Drilling depth 30m Drilling pipe diameter 42mm Aperture diameter 142mm End hole diameter 110mm Drill form and vertical height 4 legs, 6m Power Motor Y132S2-2/ 7.5kw/3000 r/min Diesel engine D180Z/ 8hp/2400 r/min Windlass Lifting speed 0.24/ 0.57/1.48m/s Maximum lifting power (single rope, low speed) 15kn Turntable Diameter 150mm Turntable speed 18/44/110r/min Dimension Length*width*height 1780*1010*900mm Weight 500kg
