Supplier: Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46)
We are a supplier of used and new Heidelberg printing machine, parts and consumables globally , we acknowledge the demand of offset products and we want to fill that gap by bringing to the world the best affordable quality offset products.
We Provide Tmt Brand or Private Logo All Type of Cnc Machines as Below 1. Horigantal Turning Centre 2. Verticle Turning Centre 3. Vertical Machining Centre 4. Spm for Special Type of Activity 5. Double Coloumn Vmc 6. Grinding Machines 7. All Type of Industrial Machines
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Product Name: CNC Lathe Detailed product parameter description: Product model: CKD6150 Parameters\Device Name CNC lathe (Dalian CKD6150) Travel X axis (mm) Workbench 1040 Maximum cutting length 1000 Travel Y axis (mm) Travel Z axis (mm) 500 Load-bearing capacity(KG) 600 discs, 1500 shafts Accuracy IT6-IT7 Surface roughness Ra1.6m Maximum workpiece length (mm) 1040 Maximum cutting diameter of vertical tool holder (mm) 500 Maximum cutting diameter on vertical tool holder slide (mm) 300
Product Name: CNC Lathe Detailed product parameter description: Product model: Dalian CKA6180 Parameters\Device Name CNC lathe (Dalian CKA6180) Travel X axis (mm) Workbench 1000 Maximum cutting length 1000 Travel Z axis (mm) 800 Load-bearing capacity(KG) Disks 1200 Shafts 2500 Accuracy IT6-IT7 Surface roughness Ra1.6m Maximum workpiece length (mm) 3000
Product name: Large CNC lathe Detailed product parameter description: Product model: Shenyang CAK80285D Travel X axis (mm): worktable 3000 maximum cutting length 2850 Travel Z axis (mm): 800 Load-bearing capacity (kg): disc 1200 shaft 2500 Accuracy: IT6-IT7 Surface roughness: Ra1.6m Maximum workpiece length (mm): 3000 Maximum cutting length (mm): 2850 Maximum cutting diameter of vertical tool holder (mm): 800 Maximum cutting diameter on vertical tool holder slide (mm): 480
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
