Supplier : C i rough casting, stone crusher fly wheel, toggle plate, wedge block, charging cover, charging hole, main dumper plate single chimney, main dumper regular used in hard coke plants, pulley stand and pulley sized 6" 9 "24", ms rail and ferrous casting
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces.
Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%.
The max weight of each pieces is up to 1 ton.
The material can be loaded loose in 20 heavy duty container.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances.
â?¢ Advantages of AlNiCo Magnet:
1.Customized designs are available.
2.Max working temperature can be as high as 550�°C.
3.Disadvantage: Br and BH(max)are not as high as rare earth magnet.
4.High energies and relatively low coercivity.
5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include:
low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for
sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc.
Advantages of Ferrite Magnet:
Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.
Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,
Content
Pb â?¥ 99.99 %
Density
11.34 g / cm 2
Color
Bluish
Weight
35 kgs / lump, 55 kgs / lump
Dimension
21" x 4" x 2.5"
Package
Standard Sea-worthy package, fixed by belt per ton
Shape
Rectangular Lump
Application
lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps
cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil
HMS 2 Scrap :HMS 1 HMS 2 METAL SCRAP / USED RAILS / CAST IRON FOR SALE !
Used Rails R50 - R65, At Best Price/Used Rail Scrap for sale /Used Railway Track in Bulk Used Rail Steel Scrap
HMS 1 and HMS 2 Scrap Heavy Melting Scrap
Product Name rail steel
Specifications 38Kg/m 43Kg/m 50Kg/m 60Kg/m Length 12M,
or customized as required
Standard ASTM, JIS, DIN, GB,
Steel Grade ASTM A2008 JIS 1103-91 DIN 536 GB/T 2585
Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size
Inspection, , X-ray Test.
MOQ 1 Ton
Delivery Condition Forged +Rough Machined (Black Surface)
Application scenario Train tracks, cranes, construction
Processing Service Welding, Drilling, Cutting, Bending
Packing Wooden pallet or according to customer's request
Lead time 7 to 15 working days
Payment terms T/T
Quality Excellent
KHODIYAR INDUSTRIA PVT LTD is an ISO-9001:2015 certified Hot Forging & Machined Components manufacturing facility produce all grades of Brass, Copper & Alloys, Aluminium & Alloys, Carbon Steels, Alloy Steels & Stainless Steel in the weight range of 50 GMS to 35KG as a single part to suit your production requirements.
We were established in 2014 & produce Forged & Machined components for OEMs in Heavy Engineering, Pump, Valve, Wind turbine, Automotive, Electrical, Aerospace Industry, Oil, Power & Gas, Material Handling, Construction & Mining Equipments, Defense etc., to list a few applications.
Our Forge shop includes :
