STEEL BILLETS 3SP AND 5SP ORIGIN : SAUDI ARABIA, QATAR, TANZANIA, INDIA, CHINA, MUSCAT Steel billets of various dimensions available. These are available in the following sizes (mm): 100X100 ; 120x120; 125x125; 130x130 ; 150x150S Standard : JIS G3141, ASTM A653, GB, Ghos 380, BS 4449, EN 10025
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request
Features Of Steel Billets Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross-section less than 36 square inches. They are used for the manufacture of all ‘long’ steel products such as bars, rods, pipes, tubes, wire and wire products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
Steel Billets of Different Specification.
BILLETS STEEL Grad Q235B / Q345 /and Q355 with a length of 12-14 m (+ 50 mm).
We supply high-quality Continuously Cast Square Billets of various cross-sections and length depending upon the requirement of our customers
The steel which is made freshly, and is still in the form of a rectangle or a metal bar, is referred to as steel billet. Steel has to be processed into more useful pieces first, before its products get sold into the market. In its pure form, raw steel will not be of any use, so it must be cast into the shape. Standard : IS 1786-2008. Steel billets are used in expulsion, fashioning, rolling, and other metal-processing operations as a raw material or feedstock. Bars, poles, and places with precise shapes are made with this material. Engineering and machining parts and components are frequently produced in forges or machine shops.
