Lot of 25 Statlock Catheter Stabilization Device REF IV0521 EXP. 2013-11 In original factory packaging & never opened May be non-sterile due to expiration date Catheter Stabilization Device is a one size fits most, disposable catheter stabilization holder for both 2-way and 3-way foley catheters. The StatLock is universal and promotes more comfort and convenience with it's swivel retainer. This device stabilizes the indwelling catheter, allowing the patient complete freedom to move as they choose. Single patient use. New in original unopened factory package. Units are sold as non-sterile due to expiration of packaging. See pictures for more information. Not for human consumption. Not an implantable device. Items sold a non-sterile due to expiration of sterility on packaging are sold as-is and may be re-sterilized and used for training or veterinary purposes. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Do not purchase this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item." DISCLAIMER: Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by purchasing this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.
Supplier: The Covid-19 Antibody Test Kit: CE Mark & CFDA Approved;
2. The 3-ply Surgical Grade Mask: FDA Approved, CE Mark, registered with the Therapeutic Goods Association in Australia, ISO and NIOSH. Classified as a Type II Surgical grade mask pursuant to the European Standard, EN 14683;
3. The KN95 FFP2 Mask (GB 19083): CE Mark and ISO standard, Hospital grade pursuant to GB 19083:2010 medical requirement standard. A medical grade mask recognised by the United States Food & Drug Association as the alternative to the N95 mask;
4. The KN95 FFP2 Mask (GB 2626): CE Mark and ISO standard, Protective / Industrial grade pursuant to its GB 2626-2009 requirement standard; &
5. 75% Alcohol Content Hand Sanitizer: FDA Approved and Certification ECM Mark, verified to standard BS EN 1276:2009.
Buyer: The Covid-19 Antibody Test Kit: CE Mark & CFDA Approved;
2. The 3-ply Surgical Grade Mask: FDA Approved, CE Mark, registered with the Therapeutic Goods Association in Australia, ISO and NIOSH. Classified as a Type II Surgical grade mask pursuant to the European Standard, EN 14683;
3. The KN95 FFP2 Mask (GB 19083): CE Mark and ISO standard, Hospital grade pursuant to GB 19083:2010 medical requirement standard. A medical grade mask recognised by the United States Food & Drug Association as the alternative to the N95 mask;
4. The KN95 FFP2 Mask (GB 2626): CE Mark and ISO standard, Protective / Industrial grade pursuant to its GB 2626-2009 requirement standard; &
5. 75% Alcohol Content Hand Sanitizer: FDA Approved and Certification ECM Mark, verified to standard BS EN 1276:2009.
Shandon Cadenza Slide Stainer USED Shandon Cadenza Slide Stainer . This unit has been tested to power on only. No further testing or verification has been performed. This item was pulled from a working environment and is in good cosmetic condition. Please note that this unit has NOT been professionally tested and may require repairs. This unit is SOLD AS IS. FDA "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration (FDA) and state and local regulatory agencies. If so, before bidding on this item, make sure you are an authorized purchaser. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item." Seller is a third party medical device seller. It is buyer's responsibility to follow FDA rules and regulation and obtain FDA authorization if needed. Seller takes no responsibility what so ever.
Features: 7-waveform display. Adjusting of lightness continuously make patient Displayer: 12.1" color TFT LCD screen with maximum 8-waveform display. Battery: Rechargeable high-energy built-in battery Multi-language interface: English, Spanish, Portuguese, Chinese, French, Arabic, Russian, etc. Easy operation with user friendly menu structure design and rotary dial Against electrosurgical interference and defibrillation and no need to disconnect the monitor from the patient in process of defibrillating. Optional built-in wireless networking function Support external printer to record graph and trend Intelligent audio and visual comprehensive alarm In-hospital applications include emergency pre-and post-operative care, ambulatory surgery, intermediate care/step down units, labor and delivery, and hospital-based special procedure areas. Suitable for use in places requiring affordable monitoring such as physiciansÆ offices, clinics, outpatient surgical centers, extended care facilities and other patient care areas Standard configuration: ECG, HR, PR, SpO2, ST analysis, RESP*2 (RA-LL impedance and nasal cavity), NIBP (with venous punch), TEMP*2(surface and rectal type), Drug dose calculation. Optional configuration: Wireless connection, Recorder and ETCO2, 2-IBP.
Cryogenic Oxygen/ Nitrogen Plant 500 M3/ Hr This plant has 2 Options: Option-1: Oxygen Gas: 500 M3/Hr Purity: 99.5% O2 and above Pressure: 150 Kg/Cm2 g 1714 Cylinders per Day Production of 7 M3 Each Cylinder Capacity (2000 Cylinders per Day Production of 6 M3 Each Cylinder Capacity). Option-2: Oxygen Gas: 350 M3/Hr Nitrogen Gas: 150 M3/Hr Purity O2 : 99.5% and above Purity N2 : 99.5% and above Pressure: 150 Kg/Cm2 g Gross Weight: 80 Tons Assembly Height: 13.5 Mtrs Area Required: 25 x 16 Mtrs Total Power Requirement: 808 KW Power Consumption: 0.9 Unit / M3 (We have various models available from 50 M3/Hr to 500 M3/ Hr for Oxygen/ Nitrogen Generation)
Supplier: Australian distributor for: 1. The Covid-19 Antibody Test Kit: CE Mark & CFDA Approved; 2. The 3-ply Surgical Grade Mask: FDA Approved, CE Mark, registered with the Therapeutic Goods Association in Australia, ISO and NIOSH. Classified as a Type II Surgical grade mask pursuant to the European Standard, EN 14683; 3. The KN95 FFP2 Mask (GB 19083): CE Mark and ISO standard, Hospital grade pursuant to GB 19083:2010 medical requirement standard. A medical grade mask recognised by the United States Food & Drug Association as the alternative to the N95 mask; 4. The KN95 FFP2 Mask (GB 2626): CE Mark and ISO standard, Protective / Industrial grade pursuant to its GB 2626-2009 requirement standard; & 5. 75% Alcohol Content Hand Sanitizer: FDA Approved and Certification ECM Mark, verified to standard BS EN 1276:2009.
Formulation, Filling and Finishing Services CellBios has a complete in-house cGMP manufacturing sterile fill and finish facility to produce cryopreservation solutions. The facility offers a full range of services from preclinical through commercial scale production of liquid-filled parenterals, biologics and medical devices in vials, syringes and other custom containers. The facility is ISO 9001 and 13485 certified, and is DCGI (Drug Controller of India / Indian FDA) inspected for drug and medical device. It was approved by the Indian Medical Council for the production of Dimethyl Sulfoxide (DMSO) & DMSO-Dextran 40, a commercial cryopreservation solutions. The approval was granted following a successful DCGI audit of our manufacturing facility. Sterile fill and finish facility The facility spans 20,000 sq.ft. with dedicated space for manufacturing, clean rooms, laboratories and administrative activities. The fill lines have been installed across the aseptic fill suites. The aseptic fill suite houses the lyophilisation unit and the INOVA VFVM-3031 vial filler. The line has a single star wheel set up and operates at a capacity of up to 75,000 vials per batch with vials ranging between 2ml and 100ml. It performs automated filling and capping and offers a three-fill needle format including pre-gas purge, product fill and post-fill headspace. It also has a unique suction stopper placement, inline class 100 capping area and an online automated inspection facility. Other specifications of the line include a low hold-up volume of up to 30ml. Custom container filling capabilities within the facility include small volume fills up to 1 L in screw-top bottles and mini vials. Production The facility undertakes all aspects of formulation / filling / finishing of drugs from the pre-clinical phase to the commercial phase of development. It offers syringe, vial and custom container filling services, lyophilisation services and stability optimisation services (SOS) for both small molecule drug products as well as biological drugs
Key Parameters 200-6,000 Nm3/h (per set) (Higher capacity can be achieved with combined multiple sets). Oxygen purity: 21-95%. Power consumption: 0.3-0.36 kWh/Nm3 with oxygen purity of 90%. Vacuum Pressure Swing Adsorption (VPSA) technology can produce the desired gas(es) much more efficiently. The system segregates certain gases from a gaseous mixture at near ambient pressure; the process then swings to a vacuum to regenerate the adsorbent material, zeolite molecular sieves. It draws the gas through the separation process with a vacuum, typically generated by a blower, The systems apply pressurized gas to the separation process and also apply a vacuum to the purge gas. Suzhou Doer Gas & Chemical Equipment (DoerCryo) specializes in Atmospheric Cryogenic Storage Systems (Full Containment/Vacuum-insulated/MicroBulk Tanks for LNG, LOX, LIN, LAR, LCO2, LN2O, LC2H4...), VPSA Oxygen Generators/Plant, & Air Separation Units (ASU). We're ISO9001, 14001, 45001, ASME certified, having rich experience working with large engineering/energy enterprises, having been well received home and abroad.
Supplier: Medical equipment, AC split units, central cooling systems, power plant, safety & security, face recognition and cctv, vegetables, food stuff and int.Commodities, drilling, pets and other spare parts, oil & gas chemicals
Services: Trade