PC hollow sheet Material: 100% Pure Makrolon Material, Micron 50 anti-UV coating Thickness: 4.0/6.0/8.0/10.0/12.0mm Max width 2.1mm, no limited length Colors: Clear/White/Opal/Blue/Green/Bronze/Brown PC hollow sheet Material: 100% Pure Makrolon Material, Micron 50 anti-UV coating Thickness: 4.0/6.0/8.0/10.0/12.0mm Max width 2.1mm, no limited length Colors: Clear/White/Opal/Blue/Green/Bronze/Brown PC solid sheet Material: 100% Pure Makrolon Material, Micron 50 anti-UV coating Thickness: 2.0/3.0/4.0/5.0/6.0/8.0/10.0/12.0mm Max width 2.1mm, no limited length Colors: Clear/White/Opal/Blue/Green/Bronze/Brown Kraft Paper
Product Name:POF shrink film wrap Thickness:From 8mic-38mic / customized Width:From 150-3000mm/customized Material:100% virgin polyolefin material Transparency:High Clear and High Transparent Colors:From 1 to 8 colors/ customized Other customized service:Size; Colors;LOGO; Packing;OEM etc. Modes of packing:Packed in standard cartons Finishing Time:
HIPS regrind from Yogurt production Waste less than 1% Material : HIPS regrind from Yogurt production Waste less than 1% Category : HIPS Type : Regrind White Grade : Specification : Product- HIPS regrind post production from Yogurt caps Waste less than 1% Material is post industrial , regrind . Origin : Israel Loading Weight : 24 Ton FOB (USD/Ton) : 720$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days
PVC OG powder+lump regrind LS100 Material : PVC OG powder+lump regrind LS100 Category : PVC Type : OG powder+lump regrind Grade : LS100 SPECIFICATION : LG Chem product.6 colors included (white , grey ,blue, red, black , green),seperated by bag.K-Value : 67. Datasheet attached Origin : Korea - Busan Loading Weight : 23 Ton FOB (USD/Ton) : 650$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days
PMMA lumps and sheets Material : PMMA lumps and sheets Category : PMMA Type : Scrap White GRADE: SPECIFICATION : PMMA lumps and sheets , extrusion grade from window Very low % of sheets , majority are lumps . Lumps are loaded in bigbags , sheets we put on pallets , Origin : Israel - Haifa LOADING WEIGHT: 24 Ton FAS (USD/Ton) : 670$ Packaging : Jumbo Bag Est. Shipping Time : 15, 30, 45 days
Supplier: At giva agro, we take pride in being a leading manufacturer and exporter of top quality essential oils, herbal extracts, and personal care products. with a commitment to excellence, we have established ourselves as a trusted name in the industry, serving clients worldwide.
our vision:
to be a global leader in providing natural and high quality products that enhance well being and promote a healthier lifestyle.
our mission:
to deliver pure and authentic products through sustainable and ethical practices.
to exceed customer expectations by consistently providing exceptional quality and service.
to contribute to the well being of society and the environment.
Services: Exporter of essential oils, personal care, skincare products.
Supplier: Manufacturers, exporters & importers of stainless steel / copper / brass / aluminium / duplex steel / carbon steel / alloy steel in shape of pipes, tubes, flanges, pipe fittings,round bar, bright bars, angle bar, flat bar, hex bar, square bar, sheets, coils, strip, plates, wire, tie wire, strip banding, decorative tubes / pipe, valves, threaded fittings,forged fittings etc. in any shape / size / grade.
also specialised in high nickel alloys like inconel, monel, titanium, hastalloy etc. in any size / type / grade & as per drawing.
Services: Manufacturers, exporters & importers
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %
What is PMMA plastic PMMA resin is also known as acrylic resin, organic glass or glass acrylic. Although not glass, in terms of technical surface, PMMA is quite similar to glass. PMMA is often used in the form of sheets and pieces with good impact resistance, high scratch resistance, and good light exposure. As a good economic alternative to glass, glass, Polycarbonate due to its low cost, it is suitable for projects that require good bearing capacity, difficult to break without high hardness MATERIAL:PMMA plastic repro pellet transparent yellowish CATEGORY: PMMA TYPE: repro pellet GRADE: Transparent Yellowish SPECIFICATION: Repro from film. Color tone is due to UVA additives Origin: Japan LOADING WEIGHT: 24 Ton FOB (USD/Ton): 1450$ - 1700$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
