Supplier: Processed coltan, cobalt and lithium
Services: Import export , refining , logistics and networking services
Buyer: Coltan , cobalt and lithium
Supplier: Processed coltan, cobalt and lithium
High Quality CAS 12190-79-3 Cobalt Oxide for Lithium Battery Cathode Material Lithium cobalt oxide, also known as lithium cobalt oxide, chemical formula LiCoO2, is an inorganic compound that is generally used as a positive electrode material for lithium-ion batteries. The structure of LiCoO2 has been studied by X-ray diffraction, electron microscopy and neutron powder diffraction. The lithium atomic layer lies between plates of regular octahedrons formed by cobalt and oxygen atoms (shown below). This structure is in agreement with the structure predicted by the theory. Lithium cobalt oxide is toxic and should be handled safely. Items Standard Result Co 60.0�±1.0 59.56% Li 7.0�±1.0 7.18% Na 300max 220ppm Fe 200max 29.0ppm Ni 300max 3.0ppm Ca 300max 22.0ppm Cu 200max 4.0ppm Moisture 500max 156ppm PH 11.2max 10.62 200mesh 100% pass 100% pass Tap Density 2.7min 2.8g/cm3 SSA 0.10-0.30 0.16m2/g D10 3.0min 5.6�¼m D50 8~12 9.9�¼m D100 60.0max 29.0�¼m First Discharge Capacity 158.0min 159.0mAh/g 1. The electrochemical performance is superior a. The average cycle capacity attenuation per cycle 135mAh/g c. 3.6 V first discharge platform rate > 85% 2. The processing performance 3. Tap density is big, help to improve volume specific storage battery 4. Product performance is stable, good consistency
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
Supplier: Oil products including petcoke, graphite, lithium, iron, copper, coal, coltan, titanium, eucalyptus wood logs, and wood chips, pine wood logs and wood chips, teak wood logs, gmelina wood logs, saman wood logs, sugar
Services: Sourcing
Buyer: Pine, iron and raw materials
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Supplier: Soda ash light / dense 99.2%
sodium bicarbonate
caustic soda flakes 99%
sodium sulphate anhydrous (ssa) 99%
sodium sulphite flakes (ssf) 60%
sodium metabisulphate
hydrogen peroxide (h2o2) 50%
formic acid 85%
glacial acetic acid
paraffin wax
liquid paraffin (white oil) lp 100
menthol crystal
fumed silica
deg (di ethylene glycol)
mono ethylene glycol (meg)
poly ethylene glycol (peg),
base oil 150n, bs 150, 600n
bitumen 60/70
rpo (rubber process oil)
lioh (lithium hydroxide)
hco (hydrogenated castor oil)
12 hsa (hydroxy stearic acid)
ferrous sulphate heptahydrate
additive for lubricating oil
aromatic chemicals
Services: Exporting of chemicals & other products
We TOPGLO CORPORATION are excited to present an exceptional opportunity to secure a consistent supply of high-grade Lithium Bearing Ore - Spodumene. As a valued partner in the global mining industry, Topglo Corporation is offering: Product: Spodumene (Lithium Bearing Ore) Grade: 3% to 4% Lithium Oxide (Li2O) Rejection: Below 2.5% Lithium Oxide (Li2O) Quantity: 20,000 MT per month, available for long-term contracts Origin: Africa Consistency: Guaranteed quality and grade with every shipment This offering is ideal to secure a stable and high-quality supply of Lithium Bearing Ore to meet your production needs. Our stringent quality control processes ensure that you receive only the best material that aligns with your specifications. If this meets your requirements, we would be delighted to discuss this further and provide any additional details you may need. Looking forward to the opportunity of working together.
Supplier: Solid minerals and stones including but not limited to tantalum ore, lithium ore, iron ore, coal, lead, zinc ore, copper ore, tantalite, nickel, tourmaline, columbite, muscovite mica, and other, agro products including but not limited to: spices: ginger, clovers, garlic, turmeric, cinnamon, pepper etc.. grains: cassia tora seeds, sesame, wheat, rice, millets, kernel etc.. other commodities: cocoa, cashews, soybeans, gum arabic, groundnuts, millets, kernel etc
