Vessels for TTO/STS EN590 available on regular basis
TERMS OF NEGOTIATION
INCOTERMS: TTO/STS
ORIGIN: EUROPEAN
INSPECTION: SGS, IQS,CIQ OR SIMILAR
INSURANCE: PAID BY SELLER, COVERING 110% OF SHIPMENT VALUE
ACCEPTABLE PAYMENT TERM: MT103/TT WIRE/USDT
COMMODITIES:
DIESEL FUEL EN590 USLD-10PPM/50PPM/500PPM GASOLINE
MINIMUM QUANTITY: 50,000 MT per Month
MAXIMUM QUANTITY: 400,000 MT Per Month
TTO/STS PRICE: USD $470 PER MT GROSS / USD 460 PER MT Net
NON-NEGOTIABLE TITLE/TANKER TAKE OVER PROCEDURE (TTO)/ SHIP
TO SHIP (STS)
1.The Buyer shall issue an Irrevocable Corporate Purchase Order (ICPO),
accompanied by the company's registration certificate and a Guarantee Letter confirming its intention to assume legal title of the product.
2.The Seller shall prepare and submit a draft Memorandum of Understanding
(MOU) to the Buyer. The Buyer shall review, countersign, and return the
executed MOU to the Seller.
3. Upon receipt of the countersigned MOU, the Seller shall provide the Buyer
with the following documentation for verification and confirmation:
A. Vessel Declaration
B. Bill of Lading
C. Loadline Report (Ullage Report)
D. Q&Q Analysis Report at Loading Port
E. Payment Invoice for Title Transfer Approval
F. Cargo Manifest
4. Upon verifying that the submitted documents, Buyer shall proceed to remit
the statutory governmental fee for Ttitle Transfer Approval in the amount of 95,000 via T/T wire transfer within two (2) international banking days. This
amount shall be deducted from the final purchase price.
5. If vessel rerouting is required, Buyer shall authorize the shipping company to
redirect the vessel to the Buyer's preferred port of discharge. The Seller shall
complete the transfer of product title to the Buyer through the relevant
governmental authority and shall issue the following documents to the Buyer:
Freshly dated Dip-Test Authorization (DTA)
Authority to Board (ATB)
Authority to Verify (ATV)
The Buyer shall then appoint SGS or an equivalent inspection agency to carry out the Q&Q analysis.
6. Upon successful completion of the dip test and once the vessel/tanker is
securely moored at the designated dock, the Buyer shall remit the remaining
balance of the purchase price via MT103 wire transfer. Following confirmation
of payment, the Seller shall issue the official Certificate of Ownership to the
Buyer, thereby finalizing the legal transfer of title. Trans-loading shall begin
immediately thereafter.
7. Trans-loading operations shall commence without delay upon confirmation of payment and title transfer.
8. The Seller shall release commissions and any agreed payments to intermediaries involved in the transaction within forty-eight (48) hours of receipt of full payment from the Buyer's bank.
7. Trans-loading commence immediately.
8. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
Product Description - Is one of a number of different grades of diesel oil
Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers.
Product origin - Middle East and USA
Key Specifications/Special Features - D2 Diesel Gas Oil is used in most types of diesel powered engines
Minimum Order Size and Packaging details - "First initial trial shipment of 10,000 MT, followed by a 12 month contract, with monthly shipments between 25,000 to 100,000 MT per month.
Product Description - Used globally as a refined diesel oil, having very low sulphur content.
Price of product is offered on CIF MED Prices, with deliveries to European ports, buyer's LOI is required, 100% genuine supply from UAE.
All fuel offers that we sell are 100% genuine offers, only send us enquiries from 100% genuine buyers who can provide an LOI, and if NO LOI can be sent/available, please do not contact us!
As we are only interested in talking to real genuine buyers who are Ready Willing and Able to proceed, who want to secure real product from a genuine seller at real market discounted prices!
Minimum Order Size and Packaging details - First initial trial shipment of 50,000 MT, 12 month contract, after 1st successful shipment, 200,000 MT to 300,000 MT per month is possible negotiated directly between buyer and seller.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS
"Diesel D6 virgin oil" is not a standard term in the oil industry. However, based on common industry terminology and understanding, it seems you might be referring to a specific type of diesel fuel. Here's a general description that could apply:
Diesel D6 is typically classified under the category of middle distillates, which are refined products derived from crude oil. It is a specific grade of diesel fuel used primarily for automotive engines and industrial applications. The term "virgin oil" is not commonly used in this context; instead, "virgin" could imply that the diesel fuel is of high quality and meets certain specifications without being mixed or blended with lower-grade fuels.
Key characteristics of Diesel D6 may include:
High Energy Density: Diesel D6 is known for its high energy content per volume, making it efficient for use in diesel engines which are common in transportation (e.g., trucks, buses, trains) and industrial machinery.
Low Sulfur Content: Modern regulations often require diesel fuels like D6 to have low sulfur content to reduce emissions and comply with environmental standards.
Suitable for Various Climates: It is formulated to perform well in a range of temperatures and conditions, ensuring reliable operation in both cold and warm climates.
Industrial and Automotive Use: Besides transportation, Diesel D6 is used in various industrial applications where a reliable and efficient fuel source is needed.
For oil exporters, Diesel D6 represents a valuable product that can be sold to domestic and international markets where there is demand for high-quality diesel fuel. Exporting Diesel D6 requires compliance with international standards and specifications to ensure it meets the requirements of customers and regulatory authorities in the receiving countries.
