EN590 10ppm, Kazakhstan origin, TTM procedure for buyer & seller to meet face to face in Rotterdam, seller will show proof of product(POP) & buyer to show POF. Competitive prices
Greetings, we trust this message finds you well. We are reaching out to express our warmest regards and extend an invitation for potential collaboration. In order to better understand your requirements, we kindly request you to share the requested quantity for EN590 10PPM. This information will allow us to tailor our offer to meet your specific needs effectively. With authorized access to reputable refineries, we take pride in ensuring the delivery of high-quality products, providing exceptional service and buyer friendly procedures. Our commitment is to foster a mutually beneficial business relationship that goes beyond expectations. Looking forward to your prompt response and the opportunity to discuss further details. Origin : Kazakhstan / Russia
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
PROCEDURES DELIVERY CIF (ASWP) Annual Contract 1. SCO is sent to end Buyer 2. Buyer sends back an ICPO (Irrevocable Corporate Purchase Order), with CIS to seller and BCL ( bankconfort Letter) sent form buyer�´s bank to Buyer. 3. Seller issues DRAFT CONTRACT and send it to the buyer; Buyer returns it signed and sealed to the Seller. 4.. Seller issues the PROFORMA INVOICE and sends it to the buyer. Buyer returns itsigned and sealed to the seller, together with VERBIAGE of SBLC VIA SWIFT MT760, or BG. THE OPERATION WILL BEGIN WHEN THE SELLER'S BANK CONFIRMS THE RECEPTION AND VALIDITY OF THE SBLC SWIFT MT 760 or the BG ( Bank Guarantee) a) Copy of Refinery certificate of incorporation b) Copy of Statement of availability of the product c) Copy of the Charter Party agreement d) Copy of Q&Q (indigenous analysis report) or SGS Report at loading port e) Copy of Vessel Questionnaire 88. f) Copy of Bill of Lading. g) Dip test Authorization (DTA) & ATB i) Cargo Manifest j) Ownership title Transfer to the buyer 6. Shipment commences as per signed contract delivery schedule and the shipment should arrive at Buyer's discharge port within 15 - 20 days after loading. 7. Buyer releases Remaining payment within 3 working days to Seller by TT/MT103 upon receipt of the shipping documents and confirmation of the Q & Q by SGS / INTERTEK / SAYBOLT at unloading port. THESE PROCEDURES ARE NOT NEGOTIABLE We can supply a SCO , with formal request (LOI) from final buyer , debt from corporate email to our corporate email too . No business on what's app . we can only quote upon receiving a official request ( full LOI) from end buyer , with quantities, specifications of product , target price, CIF to where. For the fuel - must be CIF with either SBLC or BG from top bank of the world , as a guarantee. Final payment upon arrival of the product and SGS done on arrival port. No prepayments , no extension of tanks , no 50% of logistics , nothing. We have a Partner JV with sellers and we book a zoom , we will ask questions , he will ask questions and then we will decide if this is to go or to stop . You are a real buyer ( only , no intermediaries or agents ) then we make a zoom meeting. We really donot have the time to play games . Either serious or we stop. Thanks.
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles. Its parameters include density at 15C (typically at this temperature it will have a density of 0.856kg/m3 with a minimum of 0.82kg/m3 required), a typical 0.1% carbon residue value (where the maximum permitted for this grade is 0.3%). The minimum flashpoint (the lowest temperature at which the fuel produces vapour that is an ignitable mixture in air near the surface of the liquid) is 56C.
Origin: Kazakhstan and Georgia. Avaliable for CIF AWSP and FOB Rotterdam and Houston. EN590 10 ppm is a specific type of diesel fuel that is commonly used in various industries and transportation sectors. It is a premium grade diesel fuel with low sulfur content, making it more environmentally friendly compared to traditional diesel fuels. The "EN" in EN590 stands for "European Norm," indicating that this fuel conforms to the standards set by the European Union for diesel fuel quality. The number "590" refers to the specification number for diesel fuels in the EN standard. The "10 ppm" in EN590 10 ppm refers to the maximum allowable sulfur content in the fuel, which is 10 parts per million (ppm).
- Quantity: 100,000 MT for trial shipment / max 500,000 MT per month to increase if needed by Buyer - loading port: FOB Rotterdam / Houston / Fujairah / Jurong / Qingdao / Zhoushan - delivery: TTT / TTV - payment: CI DIP & Pay, MT103 - T/T wire transfer - period: trial shipment & 12 months, with roll & extension if needed by Buyer
CIF EN-590 10ppm Diesel -12 Month Contract Production Procedures: Please Note: I'm direct to the seller of a billion dollar global trading company who specializes in gas and grains trading. We have impeccable due diligence and a successful 40 year track record. (We have our own refinery in Kazakhstan) Product: EN590 Diesel 10ppm Origin: Kazakhstan - (Our own refinery) Delivery: CIF to any safe world port MOQ: 25mt Quantity & Fixed Pricing: 25mt= $640 50mt= $635 100mt=$630 Commission: $5 per MT starts with you. (sell side closed) CIF Transaction Procedures: 1. Buyer issues LOI/ICPO. 2. Seller issues Draft Sales Purchase Agreement Contract and for Buyer's review and signing. 3. Buyer and Seller sign Sales Purchase Agreement Contract and the Buyer will send Draft Banking instrument verbiage for review. 4. Seller sends partial POP to Buyer via email: (a) Statement of Availability of Product (b) Seller's Irrevocable Commitment to Supply (c) Product Passport (d) Certificate of Product Origin (e) ATSC (Authorization to Sell and Collect) 5. Buyer sends the Final Draft of LC/SBLC for Sellerâ??s approval. 6. Buyer's Bank Swift the irrevocable, operative, transferable, divisible, confirmed and fully Funded Documentary Letter of Credit IRDLC to the Seller's bank. 7. Seller sends the full POP and 2% Performance Bond to Buyer's bank. 8. Shipment commences as scheduled in the contract and upon arrival of the cargo at the discharge port and after SGS/Q&Q, or equivalent inspection, immediately Buyer's Bank releases the Total Value of the Shipping to Seller's Bank within 48 hours (two banking days) by MT103 against shipping documents specified. 9. Seller pays all intermediaries involved in the transaction as per IMFPA within 48 hours. Notes: 1) Seller will allow transferable sblc/dlc and non-transferable sblc/dlc as a finance instrument. 2) Buyer must submit Loi/icpo to start engagement with our seller. 3) No brokers please. Only direct buyers or direct buyer reps.
We are looking for buyers of Ultra Low Sulphur Diesel EN-590 10ppm. The minimum order quantity is 25.000 Metric Tons (MT) per month, we accept FOB or CIF shipping terms according to your requirement. We have an excellent commercial relationship with the refinery in charge of supplying the products, this allows commercial dialogues to be more direct with them and facilitates negotiations. Interested in receiving more specific such as prices, technical sheets and more information about the EN-590, leave a message with your requirements or send your contact information to start a business dialogue.
Our 10PPM Diesel Fuel, compliant with GOST R 52368-2005 and EN590 standards, is a premium quality diesel fuel designed for high-performance and efficiency. This diesel fuel contains a maximum sulfur content of 10 parts per million (PPM), making it an environmentally friendly option that meets stringent European emission standards. Key Features: 1. Low Sulfur Content: With a maximum of 10 PPM sulfur, this diesel fuel significantly reduces harmful emissions, contributing to a cleaner environment. 2. High Efficiency: Engineered for optimal combustion, it ensures excellent engine performance and longevity. 3. Regulatory Compliance: Conforms to GOST R 52368-2005 and EN590 standards, ensuring reliability and quality. 4. Versatility: Suitable for use in a wide range of diesel engines, from passenger vehicles to heavy-duty industrial machinery. Benefits: 1. Environmental Protection: Lower sulfur content means reduced sulfur dioxide emissions, helping to combat air pollution. 2. Engine Protection: Enhances engine durability by reducing wear and deposits, leading to lower maintenance costs. 3. Fuel Economy: Improved combustion efficiency results in better fuel economy, saving costs in the long run. 4. Compliance Assurance: Meets international standards, ensuring compatibility and regulatory compliance across different regions. Choose our 10PPM Diesel Fuel for a cleaner, more efficient, and environmentally responsible fuel solution that does not compromise on performance.
