The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA
Incinerator bottom ash).
It can be classified as follows:
Basel code B1010.
EW Code: 17 04 02.
With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks.
This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape.
The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace).
The stock can contain all kind of aluminium packing.
We can currently provide this material in three different fractions and with different aluminium content:
3-8 mm split in two different qualities:
65% ± 3% Al
85% ± 3% Al
8-16 mm: about 70% ± 3% Al
16-60 mm: about 80% ± 3% Al
The material contains minor impurities typically stones, ash, glass.
Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed.
The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
a. Name of product: FERROUS SCRAP HMS
b. Price of product: USD$450~600/MT
c. Product origin: TAIWAN
d. Key Specifications/Special Features: HMS1 , HMS2
e. Harmonization System (HS) Code : 72044990
f. Minimum Order Size : 20MT
g. Packaging details: LOOSE
h. Monthly supply: 10000MT
R50- R65 - IRSI CODES;
The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65
Chemical Composition Used Rails;
C: 0, 54 - 0,82
Si: 0,18-0,40
Mn: 0, 60-1, 05
S: 0.04 max
P: 0,035 max
As.: 0, 01 max of Mass share
Norms: R-50 GOST7173-75 and R-65 GOST-8165-75
The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m)
Used Rail ISRI 27-29 ISRI-CODES;
(27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
(28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under.
(28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under.
(28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under.
(29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind.
The rails can be cut to the length the buyer wants
HS Code 76020090
PRICE = US$3000/TON CIF
ORIGIN: SOUTH AFRICA
PACKAGE:,50KG
MIN ORDER:200TONS
DESCRIPTION
Aluminum scrap is often categorized as â??new scrapâ?? from production processes and â??old scrapâ?? from post-consumer use. New scrap arises during the manufacturing of aluminum semi-fabricated and final products. Old scrap refers to those products collected after disposal by consumers.
