De Jaya Sdn Bhd

For sale: Refine Silica sand from Indonesia with purity 99.5% up, stock available 100k mt per month.

Micro Silica Sand: Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica. Applications : Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste. Advantages : Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.

We are supplier and exporter of Silica Sand. Silica Sand * Silica Sand is a type of sand usually available in the form of quartz. It is a hard and crystalline form of mineral components. * Silica sand is the most abundant mineral with the purity more than 99.0%. It is the preferred choice of consumption for various industrial purposes.

silica sand supply capacity production 100,000 M ton to 150,000 ton per month Price : FOB vessel 1) SiO2 99.7% ; Fe2O3 below 0.003% 2) SiO2 99.55% Fe2O3 0.021% 3) SiO2 99.6% Fe2O3. 0.01%

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

We deals in the following Chemicals :- Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets, Mica Scraps Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells

Glass GRADE "Glass grade properties" typically refer to the specific characteristics and qualities of glass that determine its suitability for various applications. Glass comes in a wide range of types and grades, each with its own set of properties that make it suitable for different purposes.High grade silica sand manufacturer for Glass Industries serving both Float glass as well as container glass Industries. We are manufacturing around 3000 to 5000 Tons of Glass Grade Sand per month. Here are some important glass grade properties: Properties: 80 - 100 ppm 130 - 150 ppm 150 - 200 ppm 200 - 250 ppm 250 - 300 ppm 300 - 500 ppm Transparency: Glass is known for its transparency, allowing light to pass through. The level of transparency can vary based on factors such as the type of glass, its thickness, and any coatings or treatments applied to it. Hardness: Glass is a hard material, but its hardness can differ based on the specific type of glass. Some glasses are more scratch-resistant than others.