Fiberglass rebar area of application Fittings made of composite materials are a product of new technologies, the technical characteristics of which make it possible to successfully use it as an alternative to traditional steel fittings in construction of: Foundation; Marine and port facilities; Reinforcement of concrete tanks; Repair and strengthening of bearing capacity of brick and reinforced concrete structures; Road slabs, airfield slabs; For the production of small architectural forms; For the road paving and decking of highway bridges; The implementation of the infrastructure elements in the chemical industries; Repair of damaged brick and reinforced concrete structures; Fittings are used for constructions based on gypsum binders; Construction of swimming pools and industrial pools; The application of fiberglass fittings in civil and industrial construction is caused by many variables: Low specific gravity; High corrosion resistance; Low thermal conductivity of composite materials; High strength, several times the strength of steel fittings; Is a dielectric; Durability; As known, the main drawback of traditional low-carbon steel fittings is a low index of corrosion resistance, which limits their use in the construction of marine facilities and constructions located in the zone of variable water level.
Product name:fiberglass mesh Place of origin::hebei, china Brand name::fyc Application::wall materials Weight::30-300g, 80-160gsqm Width::20cm-200cm, 20cm-200cm Mesh size::2.5*2.5/3*3/4*4/5*5/10*10mm Weave type::plain woven, plain woven Yarn type::c-glass Alkali content::medium Standing temperature::500 Product name::fiberglass mesh Material::fiberglass yarn Color::customer's requirement Length::50-100mm Packing details::by shrink film first each roll, then put into carton Payment terms::tt, lc, dp, cash Fiberglass alkaline-resistance mesh The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Application of fiberglass mesh : 1.Reinforce cement, stone, wall materials, roofing, and gypsum etc.. 2. All types of thermal insulation and heat protection. 3.Used in indoor and outdoor walls, prevent the various materials (such as brick, light wood, prefabricated structure) of treatment or caused by a variety of expansion coefficient of wall crack and break. 4.Roof waterproof. Advantage of fiberglass mesh 1.High strengthï¼?good impact resistance and not easy to be teared. 2.Good chemical stability 3.Good dimensional stability, stiffness, smoothness an difficult to shrink and deformation, good positioning property 4.Fire resistant, thermal insulation, sound insulation, insulations etc.
Product name:fiberglass mesh Place of origin::hebei, china Brand name::fyc Application::wall materials Weight::30-300g, 80-160gsqm Width::20cm-200cm, 20cm-200cm Mesh size::2.5*2.5/3*3/4*4/5*5/10*10mm Weave type::plain woven, plain woven Yarn type::c-glass Alkali content::medium Standing temperature::500 Product name::fiberglass mesh Material::fiberglass yarn Color::customer's requirement Length::50-100mm Packing details::by shrink film first each roll, then put into carton Payment terms::tt, lc, dp, cash Fiberglass alkaline-resistance mesh The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Application of fiberglass mesh : 1.Reinforce cement, stone, wall materials, roofing, and gypsum etc.. 2. All types of thermal insulation and heat protection. 3.Used in indoor and outdoor walls, prevent the various materials (such as brick, light wood, prefabricated structure) of treatment or caused by a variety of expansion coefficient of wall crack and break. 4.Roof waterproof. Advantage of fiberglass mesh 1.High strengthïgood impact resistance and not easy to be teared. 2.Good chemical stability 3.Good dimensional stability, stiffness, smoothness an difficult to shrink and deformation, good positioning property 4.Fire resistant, thermal insulation, sound insulation, insulations etc.
Fiberglass cloth is an engineering material. It has covered many domains such as electric appliance, electronic, transportation, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention and environmental protection. According to fabric organizational structure and appearance,. Features: Anti-burning, corrosion resistant, stable structure, heat-isolating, minimum elongated shrinkage, high intensity.
Fiberglass grid use high-quality enhanced E-glass fiber yarn, made by foreign advanced warp woven into a substrate, the use of warp-oriented structure, make full use of fabric yarn strength, improve its mechanical properties, to have a good Tensile strength, tear strength and creep resistance, and through high-quality modified asphalt coating from the plane network-like material. The principle of similar compatibility, focusing on its composite properties with the asphalt mixture, and fully protect the glass substrate, greatly improving the substrate wear resistance and shear resistance, which can be used for pavement enhancement, resistance Crack rutting and other road diseases, solved the problem that asphalt pavement is difficult to improve. Specification: Width: 3mm or 4mm or as clients request Length: 100m or as clients request FUNCTION: High tensile strength, low elongation - fiberglass geogrid is based on glass fiber as raw material, has a high resistance to deformation, fracture elongation of less than 3%. No long-term creep - as a reinforcement material, with the long-term load in the case of resistance to deformation, that is, anti-creep is extremely important, glass fiber does not creep, which ensures long-term product performance. Thermal stability - glass fiber melting temperature above 1000 â??, which ensures that the fiberglass geogrid in the paving operations to withstand thermal stability. Compatibility with asphalt - fiberglass geogrid The material coated in the post-treatment process is designed for the asphalt mixture, and each fiber is fully coated and has a high phase with the asphalt Capacitive, thus ensuring that the fiberglass geogrid in the asphalt layer will not be isolated with the asphalt mixture, but firmly together. Physical and chemical stability - after a special post-treatment agent for coating, fiberglass geogrid can resist all kinds of physical wear and chemical erosion, but also to resist bio-erosion and climate change, to ensure its performance is not affected. Aggregate insert and limitation - Since the fiberglass geogrid is a mesh structure, the aggregate in the asphalt concrete can penetrate it, thus forming a mechanical insert. This restriction hinders the movement of the aggregate so that the asphalt mixture can achieve better compaction, higher load bearing capacity, better load transfer performance and smaller deformation under load conditions. APPLICATION: Roadbed reinforcement, prevent road surface cracking. Road reconstruction. Soft soil reinforcement, improve road whole bearing capacity and prevent cracking.
Fast Cure 2inch 460cm Pipe Fiberglass Wrap Fix Tape Rapid Stock Leak Wrap Repair Bandage It is a roll of fibreglass bandage impregnated with water-activated resin. You simply immerse the bandage in water for 10 seconds, then apply by wrapping around the damaged pipe area. A successful pipe repair can be achieved in 30 minutes. Introduction of Fiberglass wrap repair bandage The Pipe Repair Bandage is an innovative and cost effective solution to repairing pipework without any welding, cutting or draining down of your system.The bandage simply works on contact with moisture and water. 1. Materials: fiberglass or polyester fabri impregnated with water-activated resin 2. Width Size: 2.5cm;5cm;7.5cm;10cm;12.5cm;15cm; Length: 1m; 1.5m; 3.6m; 4m 3. Shape: customized Instruction of Fiber glass repair fix bandage 1.shut down pipe, soak bandage in water for 10 seconds; 2. wrap it around the pipe, over steel putty, tighten firmly; 3. allow 30 minutes for pipe repair to set rock hard Application of Fiber glass repair fix bandage 1. Fiberfix tape Emergency pipe repair bandage fibre fix tape leak repair wrap water activated resin wrap Fiberglass repair tape 2.Steel and Aluminum Works: Steam and water pipes, sludge and slurry lines 3.Petroleum Plants: Repair on flammable pipe leaks without using tools - oil, gas, water supply lines 4.Power Stations: Ash transfer systems, pulverized fuel tubes, cooling water lines. 5.Manufacturing: Sealing of leaks in oil, water and coolant pipes. 6.Pipe Porosity: Strengthens and seals pipes with porosity due to internal corrosion or crack. 7.Merchant Shipping, Yachts: Emergency repairs in dock or whilst at sea to fuel lines, water pipes 8Waste pipes. Also for repairs to ship's structure. 9.Household: Repair pipe of glass, PVC, metal, strengthen shank of garden tools, household appliances Fiberfix tape Emergency pipe repair bandage fibre fix tape leak repair wrap Precautions of Fiber glass repair bandage 1.The operator should wear gloves before touch the bandage. 2.Storage at temperature(4080) 3. Shelf-life: 2 years. 4. Apply under 450psi wa
Fiberglass mesh is designed to reinforce concrete structures instead of conventional metal reinforcement. It has the following advantages in relation to metal: 9 times lighter 3 times stronger corrosion resistant significantly accelerates the reinforcement process (knitting on the object is not necessary) no need to put chairs low thermal conductivity Composite bars are connected to the network using a unique patented technology, which uses high performance automatic equipment. The joint is also a stool that forms a protective layer of concrete. For different rod diameters, the height of the stool is different. The only restriction on the use of fiberglass mesh is the inability to operate at temperatures above 150 �° C, therefore, it is not recommended to reinforce structures that must meet special fire requirements: building floors of more than 3 floors, bridge columns, monolithic towers of more than 3 floors. With this exception, almost the entire range of concrete structures remains:
Quick Information Place of Origin: China Description We can produce special size fiberglass mesh according to your requirements,like different mesh size and weight per square meter.fiberglass mesh tape High quality of our products: Fiberglass Mesh Coated Acrylic Resin (1)Coating glue: our coating glue is produced by South Korea LG Chemical Company which belongs to LG Group; (2)Our fiberglass yarn is more 20% strong strength and beauty surface than normal fiberglass yarn. (3)Certificates to guarantee quality: Passed in ISO9001 certificate, IQ net and China National test. FIBERGLASS MESH: Specification Material of the base:Fiberglass yarn Type of weave (name):Leno Hole Size:2.8x2.8mm,4x4mm,5x5mm,10x10mm Colored fibers woven:White,Green,Blue,Orange,and any color Coating:Latex Coating, Urea Coating Length of the roll:30m,50m,100m. Height of the roll:0.2m,0.5m,1m,1.2m,1.5m,1.8m, Weighting:45g,80g,100g,110g,120g,150g,160g and so on. Usage: 1.75g / m2 or less: Used in the reinforcement of thin slurry, to eliminate small cracks and scattered throughout the surface pressure. 2.110g / m2 or about: Widely used in indoor and outdoor walls, prevent the various materials (such as brick, light wood, prefabricated structure) of treatment or caused by a variety of expansion coefficient of wall crack and break . 3.145g/m2 or about: Used in the wall and be mixed in various materials (such as brick, light wood, prefabricated structures), to prevent cracking and scatter the whole surface pressure, especially in the external wall insulation system (EIFS ). 4.160g / m2 or about: Used in insulator layer of reinforcement in the mortar, through shrinkage and temperature changes by providing a space to maintain movement between the layers, prevent crack and rupture due to shrinkage or temperature Price Price Condition : FOBPrice : USD.2 / sqm Packaging & Delivery Packing :opp bag then plastic woven bag or cartons.Delivery Lead Time : 10-15 days after received advanced payment Minimum Order : 5000 sqmSupply Ability : 70000 sqm per day. -
Epoxy resin fiberglass filament wound tubes are made of non-stop fiber wet winding. It is specially developed for high-voltage electrical equipment structural parts such as reactor, lightning arrester, fuse, transformer, on load tap changer, transformer,etc.