Virgin LLDPE Granules LLDPE 7042 LLDPE raw material film grade
Specifications:- 1. LLDPE 2. Transparent granule 3. We have all grades - Injection, Film and Moulding, all Density and Melt Flow Rate.
LLDPE (Linear Low Density Polyethylene) Origin: Petrochemical Plant Grade: Film Grade Type: Off Grade Color: Natural Loading Port: Jeddah, Saudi Arabia
High density polyethylene HDPE for non-toxic, tasteless, no smelly white particles, melting point is about 130 C, relative density of 0.941 - 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, and environmental stress cracking resistance.
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %
Application: DS7601 application on PP, textiles, fabrics. Composition: Polypropylene synthesis Pipe grade
We can provide LLDPE MLLDPE
LLDPE Granules Linear Low-Density Polyethylene has penetrated almost all traditional markets for polyethylene. It is used for plastic bags and sheets (where it allows using lower thickness than comparable LDPE), plastic wrap, stretch wrap, pouches, toys, covers, lids, pipes, buckets etc. As an eminent supplier, Mama Global has a very well organized and well-structured way of operations and transportation, making us capable of delivering a flawless range of LLDPE Granules to the destination port. So, you can stay rest assured with us for the damage-free products.
We are very well known manufacturer and exporter for â?» Recycled Plastic Polymer LLDPE & LDPE We are the shortest and most effective route for plastics recycling, so we have become the critical link between plastic waste producers and those that use recycled plastics. As a professional manufacturer and exporter of this product in India, I would like to establish a friendly business relationship with you. â?? Products We Manufacturer â?? â?» Recycled LLDPE Roto Moulding (Agglomerates) - Powder / Granules â?» Recycled LDPE / LLDPE (Film Grade) - Granules / Pellet / Resins â?» Recycled LDPE / LLDPE (Finished Product) - Garbage Bag / Trash Can Liners - (Flat, Gusset & Star Seal) For more about inquires please feel free to contact us, Please don't hesitate to contact me in case of any questions. With Regards Yogesh Naik AAACorp Exim India Pvt Ltd
Specification: Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. Application: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. Application Suitable for film, heavy packaging film, cable insulation materials, blow molding and foam products.
