GALX-HM1 Nano Antiwear Additive Description GALX-HM1 is an amber transparent oily liquid, formulated by nano boron carbide and high-temperature antioxidant, which is a phosphorus free, low sulfur, ashless energy-saving and anti-wear additive. It has outstanding anti-wear property and good friction-reduction property. Application Used to blend low-phosphorus, low-ash internal combustion engine oils and additive package as antiwear additive Used to blend transaxle oils, manual transmission oils, industrial gear oils, worm gear oils and their additive packages Used to prepare antiwear and ash-free anti-wear hydraulic oils combined with phosphate ester Used as antiwear and friction-reduction car care products in bottle packages, more effective for energy saving and oil saving in finished gear oils and engine oils Recommended Dosage Used in engine oils:1.5%-2.5% Used in vehicle gear oils:2.0%-3.0% Used in industrial gear oils:1.2%-1.8% Used in antiwear hydraulic oils:0.6%-1.0% Characteristics Item Standard Value Test Method Density(20),kg/m3 1280-1380 GB/T1884 Kinematic Viscosity(100), kg/m3 7-12 GB/T265 Flash Point,(COC), 180-200 GB/T267 Pour Point, -10max GB/T3535 B, % 0.02-0.04 SH/T0227 Average friction coefficient/f 0.07-0.08 SH/T0762 wear scar diameter/mm 0.4-0.45 SH/T0189 Pb/N 920-1050 GB/T3142 Storage Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75 C. For long-term storage, the suggested temperature is lower than 45 C.
GALX-7011 Oxidized Graphene Lubricant Additive Description Oxidized Graphene lubricant additive is a patented productï¼?it is widely used in engine oils, wind power oils, machinery oils, emulsion fluids, drilling fluids, grease extreme pressure lubricants and so on. It not only has good oil solubility (good solubility in Class, Class II, Class III base oil and PAO) and excellent dispersity, but also has excellent anti-wear, anti-friction, anti-oxidation and increasing-torque performances. It also has the excellents effects of repairing, saving energy and relieving oil burning when added to engine oil.The product has been certified by Southwest Research Institute and American Petroleum Institute (API) for its application in refined oil products. Characteristics Item Typical Value Appearance Yellow Liquid KVï¼? 40 â??ï¼?,mm 2 /s 33.5 KVï¼? 100 â??ï¼?,mm 2 /s 5.0 Flash Pointï¼?â?? 200 Pour Pointï¼?â?? -24 PB(Kg),treat rate:1% 90 Long-time wear/D(40kgï¼?60min) 0.37 Recommended Dosage:1.0%-3.5% Packing and Storage Packing: 200 liter metal drum (net weight: 200kg/drum) Shelf Life: 2 years, stored in dry, clean and well ventilated warehouses, lower than 45C
GALX-HM1 Nano Antiwear Additive Description GALX-HM1 is an amber transparent oily liquid, formulated by nano boron carbide and high-temperature antioxidant, which is a phosphorus free, low sulfur, ashless energy-saving and anti-wear additive. It has outstanding anti-wear property and good friction-reduction property. Application Used to blend low-phosphorus, low-ash internal combustion engine oils and additive package as antiwear additive Used to blend transaxle oils, manual transmission oils, industrial gear oils, worm gear oils and their additive packages Used to prepare antiwear and ash-free anti-wear hydraulic oils combined with phosphate ester Used as antiwear and friction-reduction car care products in bottle packages, more effective for energy saving and oil saving in finished gear oils and engine oils Recommended Dosage Used in engine oils:1.5%-2.5% Used in vehicle gear oils:2.0%-3.0% Used in industrial gear oils:1.2%-1.8% Used in antiwear hydraulic oils:0.6%-1.0% Characteristics Item Standard Value Test Method Density(20),kg/m3 1280-1380 GB/T1884 Kinematic Viscosity(100), kg/m3 7-12 GB/T265 Flash Point,(COC), 180-200 GB/T267 Pour Point, -10max GB/T3535 B, % 0.02-0.04 SH/T0227 Average friction coefficient/f 0.07-0.08 SH/T0762 wear scar diameter/mm 0.4-0.45 SH/T0189 Pb/N 920-1050 GB/T3142 Storage Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.
Product Code Chemical Component Specification GALX-106D-Calcium Alkyl Benzene Sulfonate-TBN 400 GALX-107-Synthetic magnesium sulfonate-Lubricant Detergent GALX-115B-Calcium Sulfurized Alkyl Phenate-Lubricant Detergent GALX-151-Mono-alkenyl Succinimide-Lubricant Ashless Dispersant GALX-154-Polyisobutylene Succimide-Lubricant Ashless Dispersant GALX-154A-Polyisobutylene Succimide-Explosive Emulsifier PIBSA-Polyisobutylene Succinic Anhydride-Raw Material for Dispersant GALX-155- Polyisobutylene Multi-succimide-Lubricant Ashless Dispersant GALX-161-High Molecular Weight succinimide-Lubricant Ashless Dispersant GALX-202-ZDDP/Zinc Butyl Octyl Primary Alkyl Dithiophosphate-Antioxidant and corrosion inhibitor GALX-203-ZDDP/Zinc Dioctyl Primary Alkyl Dithiophosphate-Antioxidant and corrosion inhibitor GALX-321-Sulfurized Isobutylene/SIB-EP and AW Additive GALX-323-Methylene-bis-(dibutyldithiocarbamate)-Lubricant ashless Antioxidant and EP-AW additive GALX-501- 2, 6-di-tertiary butyl para-cresol/BHT-Lubricant Antioxidant GALX-502A-Phenolic Antioxidant Mixture Liquid Hindered Phenol-Lubricant Antioxidant GALX-551-Benzotriazole Derivative-Lubricant Metal Deactivator GALX-561-2,5-Bis(tert-dodecyldithio)-1,3,4-thiadiazole/DMTD-Derivative Lubricant Metal Deactivator GALX-9557-Dialkyl Diphenylamine high-temperature Antioxidant-Amine Antioxidant GALX-9558-Phenol ester type antioxidant-Lubricant Antioxidant GALX-8615-OCP Ethylene-Propylene Copolymer-PPD-Type Viscosity Index Improver GALX-8619A-OCP Ethylene-Propylene Copolymer-Viscosity Index Improver with High anti-shear ability GALX-706-Benzotriazole/BTA-Lubricant antirust additive GALX-746-Dodecylene Succinic Acid-Lubricant antirust additive GALX-801-Alkyl naphthalene-Pour Point Depressant GALX-886A-Polymethacrylate/PMA-VII-type PPD GALX-OMC-1-Molybdenum Dialkyl Dithiophosphate/MoDDP/MoDTP-Friction Modifier GALX-OMC-2-Sulfur-free and Phosphate-free Organic molybdenum compound-Friction Reducer GALX Additive Package for Engine Oils,Gear Oils,Hydraulic Oils,Heat Transfer Fluids,Air Compressor Oils
Product Code Chemical Component Specification GALX-106D-Calcium Alkyl Benzene Sulfonate-TBN 400 GALX-107-Synthetic magnesium sulfonate-Lubricant Detergent GALX-115B-Calcium Sulfurized Alkyl Phenate-Lubricant Detergent GALX-151-Mono-alkenyl Succinimide-Lubricant Ashless Dispersant GALX-154-Polyisobutylene Succimide-Lubricant Ashless Dispersant GALX-154A-Polyisobutylene Succimide-Explosive Emulsifier PIBSA-Polyisobutylene Succinic Anhydride-Raw Material for Dispersant GALX-155- Polyisobutylene Multi-succimide-Lubricant Ashless Dispersant GALX-161-High Molecular Weight succinimide-Lubricant Ashless Dispersant GALX-202-ZDDP/Zinc Butyl Octyl Primary Alkyl Dithiophosphate-Antioxidant and corrosion inhibitor GALX-203-ZDDP/Zinc Dioctyl Primary Alkyl Dithiophosphate-Antioxidant and corrosion inhibitor GALX-321-Sulfurized Isobutylene/SIB-EP and AW Additive GALX-323-Methylene-bis-(dibutyldithiocarbamate)-Lubricant ashless Antioxidant and EP-AW additive GALX-501- 2, 6-di-tertiary butyl para-cresol/BHT-Lubricant Antioxidant GALX-502A-Phenolic Antioxidant Mixture Liquid Hindered Phenol-Lubricant Antioxidant GALX-551-Benzotriazole Derivative-Lubricant Metal Deactivator GALX-561-2,5-Bis(tert-dodecyldithio)-1,3,4-thiadiazole/DMTD-Derivative Lubricant Metal Deactivator GALX-9557-Dialkyl Diphenylamine high-temperature Antioxidant-Amine Antioxidant GALX-9558-Phenol ester type antioxidant-Lubricant Antioxidant GALX-8615-OCP Ethylene-Propylene Copolymer-PPD-Type Viscosity Index Improver GALX-8619A-OCP Ethylene-Propylene Copolymer-Viscosity Index Improver with High anti-shear ability GALX-706-Benzotriazole/BTA-Lubricant antirust additive GALX-746-Dodecylene Succinic Acid-Lubricant antirust additive GALX-801-Alkyl naphthalene-Pour Point Depressant GALX-886A-Polymethacrylate/PMA-VII-type PPD GALX-OMC-1-Molybdenum Dialkyl Dithiophosphate/MoDDP/MoDTP-Friction Modifier GALX-OMC-2-Sulfur-free and Phosphate-free Organic molybdenum compound-Friction Reducer GALX Additive Package for Engine Oils,Gear Oils,Hydraulic Oils,Heat Transfer Fluids,Air Compressor Oils
GALX-HM2 Nano Antiwear Energy-saving Additive Description GALX-HM2 is an amber transparent oily liquid, modified by nano surface and dispersed into carrier by special processes. GALX-HM2 has excellent friction reduction, antiwear, antioxidation anticorrosion detergency and dispersity, which is a new type of energy-saving friction-reduction additive. Application Used as friction modifier in all kinds of lubricant and grease which have friction reduction,antiwear and fuel saving requirements specially suitable for use in internal combustion engine oils and wave box oils Recommended Dosage Used in engine oils:0.5%-2.0% Used in gear oils:0.5%-2.0% Used in grease:1%-3% Characteristics ItemStandard ValueTest method Density(20),kg/m3950-1150GB/T1884 Kinematic Viscosity(100), mm2/s30-38GB/T265 Flash Point,(COC), 180-210GB/T267 Pour Point, -13maxGB/T3535 S, %6.0-8.3SH/T0303 P, %2.0-4.0SH/T0296 TBN, mgKOH/g110-180SH/T0251 Pb/N920-1050GB/T3142 Storage Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75 C. For long-term storage, the suggested temperature is lower than 45C.
MOBILGEAR 600 XP 220 Gear Oil Mobilgear 600 XP 220 Descriptions MOBILGEAR 600 XP 220 is extra high performance gear oil that has outstanding extreme pressure characteristics and load-carrying properties, intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. MOBILGEAR 600 XP 220 is designed to stay ahead of the changing needs of gearbox technology. Gearbox technology design trends are towards smaller units with similar power throughout. This increase in power density places increased demands on gear oils. MOBILGEAR 600 XP 220 is formulated to meet the stress by providing extra protection for gears.
Supplier: Lubricant fuels and additives
Modern mineral base oils are the result of a long and complex distillation and refining processes. The feedstock used is crude oil. This substance is not of uniform quality but consists of several thousands of hydrocarbon compounds in which the elements carbon and hydrogen are present in all molecules and, in part, are bound to other elements. The hydrocarbons can be divided into three main groups: paraffinic, naphthenic and aromatic. Paraffinic hydrocarbons can be further divided into two subgroups: normal paraffinic and iso- paraffinic. Paraffinic hydrocarbons are the best lubricants. The distillation process in the refinery separates the hydrocarbons contained in the crude into cuts based on the molecule size. Furthermore, as many unwanted substances as possible are removed in the process, such as sulphur, aromatic hydrocarbons, paraffin wax, etc. In other words the mineral oil production process is physical cleaning and the end product is so-called paraffinic base oil. Most of the hydrocarbons in the base oil are paraffinic, but it also contains naphthenic and aromatic molecules. When the finished lubricant, such as motor oil, is made of these, several additive compounds are used to improve the base oil properties. The final outcome can also be so-called naphthenic base oil, where most of the hydrocarbons are naphthenic. Their cold properties are excellent.
