Please quote for the following wholesale product requirement -
Product: Steel Plates
Specifications:
Grade S235JR+N thickness 12mm width 250mm
Grade S235JR+N thickness 10mm width 150mm
Grade S275JR. thickness 4;5;6mm width 150mm (higher grades are acceptable, for example S355JR)
Grade S275JR. thickness 5;6;8mm width 200mm (higher grades are acceptable, for example S355JR)
Qty: 20-24 tons
Note: Suppliers From Turkey Only Preferred
Quantity Required : 20 - 24 Ton/Tons
Shipping Terms : CIF
Destination Port : Poland
Payment Terms : Bank Transfer
Looking for suppliers from : Turkey
Contact : Dariusz Modliski
Please provide a quotation to the following requirement from importer -
Product Name: Carbon Steel Plate
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CNF
Destination Port : Bangladesh
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Saiful Islam
Please provide a quotation to the following requirement from importer -
Product : Steel Plate Carbon, Hot Rolled, Alloy
Specifications:
STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X
WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM)
NO.35 Cr. Mn SiA
CHEMICAL COMPOSITION
C=0.32-0.39% Si=1.10-1.40%
Mn=0.80-1.10% Cr-1.10-1.40%
P=Max 0.025% S=Max 0.025%
Cu= Max 0.25% Ni = 0.30%
MECHANICAL PROPERTIES
Tensile strength=600-800(MPa)
Elongation = 16% Min
Quantity: 30,400 Kg.
ITEM # 2:
STEEL PLATE CARBON, HOT ROLLED, ALLOY
STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X
WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM)
NO.35 Cr. Mn SiA
CHEMICAL COMPOSITION
C=0.32-0.39% Si=1.10-1.40%
Mn=0.80-1.10% Cr-1.10-1.40%
P=Max 0.025% S=Max 0.025%
Cu= Max 0.25% Ni = 0.30%
MECHANICAL PROPERTIES
Tensile strength=600-800(MPa)
Elongation = 16% Min
Quantity: 35,700 Kg.
SPECIAL CONDITIONS: To be followed by Shipper/Maker;
1. Same (Single) competitive Unit Rate must be quoted against the same tendered items.
2. Full Qty falling in both inspection authorities must be quoted otherwise offer will be ignored.
3. Sample to be provided by the firms within 15 x days of technical opening except last Supplier,
4. Validity of offer at least 90 days (Extendable if required) would be considered w.e.f
commercial opening of tender (s) after acceptance of technical offers
5. Conditional offers are likely to be ignored.
6. Needful supporting technical literature/ Catalogue/ Brochure against each tender it
must accompany technical quotation if requisite/relevant technical literature found
missing, quotation will be considered rejected.
7. Performance Bond (in shape of CDR/B.G) should be provided against L.O.I for issuance of formal contract. However,
20 The supplier will render a Warranty / Guarantee Certificate for a period of 12 x months
from final acceptance of store
21 Protocol of inspection will be followed as per inspection authorities.
Further requirements:
· Supplier type: manufacturer
35 tons approx
Quantity Required : 35 Ton/Tons
Shipping Terms : CIF
Destination Port : Pakistan, Pakistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Rashid Akhtar
The buyer would like to receive quotations for -
Product Name: Mild Steel Plate
Specifications :
Steel Grade: Q235B China/S235JR EN/GOST1050 Russia
Quantity Required : 80000000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : China
Payment Terms : 100% L/C
Looking for suppliers from : Worldwide
Contact : John Zou
Please provide a quotation to the following requirement from importer -
Product Name: Mild Steel Plate
Specifications :
Origin: Russia, Kazakhstan , Uzbekistan , Turkey Or Any Origin Can Be Ok But
No China Or India Or Saudi Origin
All To China Shanghai
Prices Include Commission
Quantity Required : 8000000 Ton/Tons Monthly
Shipping Terms : CIF
Destination Port : China
Payment Terms : L/C
Looking for suppliers from : Worldwide
Target Price : USD 270 per Metric Ton/Metric Tons
Contact : Salem
The buyer would like to receive quotations for -
Product Name: Steel Plate
Specifications :
Type: Low Carbon ASTM A36 Steel Plate
Quantity Required : 200 Piece/Pieces
Shipping Terms : FOB
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Andrew
The buyer would like to receive quotations for -
Product Name: Roll Coil Steel Plate
Specifications :
Heat Galvanized Steel Coil
Zinc Coating 120gsm
Width 295mm* Thickness 2.3mm , 2tons Per Roll
Zinc Color:dull Gloss(no Gloss Zinc)
Grade :sgh-400 (dx51d)
Spangle®ular Spangle, Chromated/Unoiled
Alfmotion Own Label Required
About Monthly 100 Tons / 1st 25tons As Sample
Quantity Required : 25 Ton/Tons(sample)
Shipping Terms : FOB
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Brad Park
Please quote for the following wholesale product requirement -
Product Name: Hot Rolled Steel Plate
Specifications:
Grade : 400 450 500 500 600
size : 1/2'' 2mm 10mm
Quantity Required : 100 Ton/Tons
Shipping Terms : CIF
Destination Port : China
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Leo Liu
Please quote for the following wholesale product requirement -
Product : Steel Product Like Steel Bars, Steel Coils, Steel Plates
Specifications:
Steel Bars, Steel Coils, Steel Plates, Steel Tubes, Steel Pipes, Steel Fittings
as per moq
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : China, China
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Maggie
Please quote for the following wholesale product requirement -
Product Name: ASTM A572 Grade Hot Rolled Mild Steel Carbon Plate
Specifications:
Q235/Q235B/Q345/Q345B/Q195/St37/St42/St37-2/St35.4/St52.4/St35
Quantity Required : 10 Ton/Tons
Shipping Terms : CIF
Destination Port : Alexendria, Egypt
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Ahmed Hussein
