Anionic polyacrylamide series products are water-soluble linear polymers with high degree of polymerization.2.They are easily soluble in water and almost insoluble in common organic solvents such as benzene, ether, lipids and acetone.3.It combines valuable properties such as flocculant, thickening, shearing ,resistancereducing, dispersive
Aluminium sulfate (Flocculant) Used as flocculant White pieces or granules Tablets(20g, 50g, 100g, 125g, 200g, 500g, etc) Prompt shipment within 3 weeks from order confirmation. Specfactions and Packaging can be made according to your requirements. Aluminum sulfate normal packaging 50kg Fibre drums. Various plastic drums in sizes such as 50kg, 45kg, 40kg, 30kg, 25kg, 20kg, 15kg, 10kg, 5kg, 2kg, 1kg, 0.5kg, etc. 25kg bags or 1000kg bags with pallets. Tablets can be packaged in 1kg bags or 1kg pots, then in 10kg to 50kg plastic drums. 0.5kg, 1kg, 2kg, 5kg plastic drums are normally put in boxes, such as 12x0.5kg, 12x1kg, 6x2kg, 4x5kgs, etc. All packaging can be provided with or without pellets. Aluminum sulfate packaging and specs can be made according to your requirements.
Hot Sale Industrial Grade Poly Acrylamide Nonionic Cationic Anionic Polyacrylamide PAM MSDS For Water Treatment Flocculant Polymer Powder MSDS Polyacrylamide PAM Chemicals in Saifu The packaging of Polyacrylamide is 25 kg woven bag, lined with thick plastic inner film. Poduct Name Cationic Polyacrylamide Anionic Polyacrylamide Nonionic Polyacrylamide Appearance White Granule White Granule White Granule Ion Degree 5%~60% / / Hydrolysis Degree / 15%~30% 0~5% Solid Content 90% 90% 90% Dissolution Time 90 minutes 90 minutes 90 minutes
We deals in the following Chemicals :- Flocculation Aid for Effluent Water Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
Characters Made up of precision-treated inorganic salts and high-molecular polymers,strong current-neutralization and adsorption flocculation of inorganic polymer flocculants,strong adsorption bridging effect of organic polymer flocculants; Comply with China drink water certificate; Mainly used in Reverse Osmosis pre-treatment system, before multi-media filter. Partially or completely replace currently used aluminum and iron salt inorganic flocculants and can be used alone or in combination with aluminum or iron salt; Adapted to wide PH range of water, general dosage is 2.0-10.0 ppm; During performing process, POLYTE 705 Wont change water pH value when water pH is near neutral; Fast coagulate, coagulation is stable with high density, easy sedimentation; Effective in removing turbidity, biocide ,algaecide; No effect when chlorination, no increasing of soluble metal(aluminum, iron); Speed up of solid-liquid separation, extend filters service life when directly filtering; Mutually soluble with water in any ratio; Physical Properties Appearance:Light yellow to brown yellow liquid Density (20 °C):1.25±0.05 g/cm3 pH(1.0%):3.5ï½?5.5
Our flocculants(polyacrylamide) in type as under: Nonionic : 0~10% ionic Anionic: 10 ~ 100 ionic Cationic : 5 ~ 100 ionic Amphoteric 15kg or 25kg paper bags
CHEMICAL NAME: Polymeric ferric sulphate DESCRIPTION: BLUWAT PFS-S series is Poly ferric sulphate powder of direct drying type, a kind of superior performance of inorganic polymer flocculant, appearance is yellow solid, easily soluble in water, aqueous solution of 10% (mass) for the red brown transparent solution, hygroscopicity. Poly ferric sulfate is widely used in drinking water, industrial water, all kinds of industrial wastewater and urban sewage purification, sludge dewatering, etc. It's a safe reliable clarificant. ADVANTAGES: ?No Al+ and Cl-, safe, reliable and nontoxic. ?Rapid sedimentation and good flocculation ?Wide effective PH value and strong applicability comparing with aluminum salt. ?In industry waste water processing, good decolorization and high removing effect on COD. APPLICATION FIELDS: ?Industry waste water treatment (such as the paper making waste water, the printing waster water, the massacre waste water, the automobile manufacturing waste water, the beer factory waste water and so on.), ?Many kinds of industry circulating water treatment (ex, the blast¨Cfurnace gas washing water, the make-up water of the high pressure boiler in the heat and power plant, the industry waste water in biochemical treating factory, the waste emulsifying solution, the opalescent solution and the oil waste water. ?Clarifying agent in Sugar,Medicine,Tanning,Cosmetic etc TYPICAL PROPERITIES: Appearance: Light Yellow Powder Fe3+ Content (%): 19Min. Restore Substances ( Fe2+) Content%: 1.0% Max. Basicity: 9.0-14.0% PH(1% water solution): 2.0-3.0 Insoluble Substances (%):1.5 Max.
Cas no. 9003-05-8 Appearance: granular dry powder Charges: anionic, neutral 25kg per bag
Classification: Chemical Auxiliary Agent CAS No.: 9003-05-8 Other Names: APAM MF: (C3H5NO)n EINECS No.: 207-173-7 Purity: 100% Place of Origin: Henan, China Usage: Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals Brand Name: XINQI Model Number: XQFLO 9260 Certification: ISO9001 Appearance: White Powder Molecular weight: 6-12 Million Packing material: 25kg,pp bags or paper plastic composite bags Storage: in a cool dark, wentilated, and dry place,and keep away from moisture Delivery Date: within 7working days after receiving the payment Application: Waste Water Treatment Color: Pure White Grade: Industrail Grade Shelf life: 2 Years Type: Flocculant
SINOFLOC nonionic flocculants are technically pure polyacrylamides. Nonionic polyacrylamide exhibits neutral nonionic properties in the aqueous solution which is hardly influenced by the PH value in the application. SINOFLOC nonionic flocculant polyacrylamide are suitable for use as a settlement aid in many different mineral-processing applications and are particularly effective under very low PH conditions, as encountered in acidic leach operations. Nonionic Polyacrylamide (PAM) Specifications Products Product Code Charge Molecular Weight Nonionic PAM Powder SINOFLOC 9010