The fibers, 250¦ìm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of psp longitudinally. Between the psp and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (pe) sheath. Charicteristic: good mechanical and temperature performance high strength loose tube that is hydrolysis resistant special tube filling compound ensure a critical protection of fiber crush resistance and flexibility psp enhancing moisture-proof two parallel steel wires ensure tensile strength Wooden drum
Cable type G.652d/g657a, pvc, lszh, simplex or duplex, 0.9, 2.0, 3.0mm Fiber type Smf-28e, sm 9/125um, mm 50&62.5/125um Polish method Upc, pc, spc, apc Connector Fc, sc, lc, st, e2000, din, d4, sma, fddi, mpo/mtp Insertion loss 0.1db (for single mode master) 0.25db (for single mode standard) 0.25db (for multimode) Return loss (for single mode) Upc 50db Spc 55db Apc 60db (typ.65db) Repeatability ¡¨¤0.1db Operating temperature -40 c to 85 ¡ãc Geometry requirement (for single mode) Ferrule end face radius7mm r 12mm (for apc) 10mm r 25mm (for standard) Apex offset 30 |¨¬m (for master) Apex offset 50 |¨¬m (for standard) Undercut -50nm u 50nm 1pc/plastic bag, 1500pcs/carton box
Fiber Optic Patch Codes
Fiber Optic Cables
Supplier: Optical fiber cable, FTTH cable, optical fiber patch cord, optical fiber adapter, optical fiber termination box
Fiber optic adapter Connector: sc, fc, lc, st, e2000, mu, mtrj, d4, din, sma, bare fiber adapter, hybrid adapter, plastic adapter- optional Parameter Single mode Multimode Insertion loss(db) 1 0.25 Exchangeability(db) 1 0.20 Repeatability/500 remates(db) 1 0.30 Sleeve material Zirconia Phosphor bronze Housing material Plastic Metalic Operating temperature -40¡ãc to +80¡ãc Storage temperature -40¡ãc to +80¡ãc 10pcs/blister box, 3000pcs /carton box
Optic Fiber Media Converter 10/100BaseT/TX to 100BaseFX external power supply Features Supports auto MDI/MDIX crossover 1K MAC address can be storage, and automatic updated Supports 10/100M, full/half duplex auto- negotiation Comply with IEEE 802.1Q VLAN TAG, Spanning Tree standard More than 50,000 hours MTBF Supports over-sized packets up to 1600Bytes Full duplex-flow control, Half duplex-back pressure Link fault pass through function Full-positioned LEDs to indicate power and network status Same card on rack mounted and desktop FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark Throughput @ 100Base: 148,800 pps (64-byte packets) Multimode or Singlemode; single fiber or dual fiber optional Transmission distance is from 2KM up to 120KM Network broadcast storm protection function High quality optical modules and chips with working stability Specification Standard IEEE802.3 (10BASE-T) IEEE802.3u 100BASE-TX/FX (Fast-Ethernet) IEEE802.3x (Flow Control) IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree Fiber Connector SC standard, ST/FC/LCoptional 10/100BASE-T STP or UTP Category 5/5e/6 cable (Max. 100m) 100BASE-FX 50/125um, 62.5/125um multimode fiber cable (2Km) 9/125um singlemode fiber cable (20/40/60/80/100/120Km) Conversion Mode / Delay Time Store-and-Forward < 10us, straight-through
Supplier: Outdoor, indoor, ftth fiber optic cable, fiber optic patch cord and pigtail, fiber optic terminal box, fiber optic tools
Services: OEM
Application: *Long Distance Trunk Network, Metropolitan Area Network, Access Network l *DWDM System *Fiber CATV Network, Fiber Data Network *Optical Active Accessories Features: *Low insertion loss, *High return loss *Good repeatability and exchangeability
