Specifications:
Origin: Vietnam.
Appearance: White/brown seeds.
Moisture: 12% max.
Starch: 85% min.
pH: 5-7.
Ash: 0.2% max.
Protein: 0.2% max.
Diameter: 1.8-2.5 mm.
Ingredients: tapioca starch, caramel or coffee (adjustable), water, Natri Carboxymethyl Cellulose CMC 466, Caramel, Kali Sorbate E202.
Packaging: 1kg, 5kg PE bag, then in carton. 20ft = 18mts.
Price FOB HCMC Port: Please revert to us
Payment terms: L/C at sight or T/T 50% in advance and 50% after receiving B/L via fax or email.
Beet pulp is a highly digestible fiber source that is a byproduct from the processing of sugar beet which is used as fodder for horses and other livestock
Beet pulp is the fibrous material left over after the sugar is extracted from sugar beets. Beet pulp is rich in fiber and is unique in its form as it is soluble fiber and highly digestible.
Nutritionist Importance of Beet Pulp
Despite being a byproduct of sugar beet processing, beet pulp itself is low in sugar and other non-structural carbohydrates, but high in energy and fiber. Among other nutrients, it contains 10 percent protein, 0.8 percent calcium and 0.5 percent phosphorus. It has no Vitamin A, so additional forage or supplementation is required to provide complete nutrition .It is economical as compare Wheat and Maize.
How to Feed Beet Pulp?
Beet Pulp can be feed to animals in fresh or in silage form. Beet Pulp can be feed throughout the year if bunker safely. A standard ration of beet pulp for Animals is usually dry weight. Before feeding to Animals, beet pulp is usually soaked in water, at a ratio of one-part pulp to about four parts water. The maximum amount of water is absorbed after three to four hours, but it may be soaked for as little as one to two hours, especially in hot weather when there is a risk of fermentation. Most commercial feeds designed for geriatric Animals contain large amounts of beet pulp and are fed straight out of the bag without being soaked, and manufacturer's directions generally recommend giving such feeds dry unless the Animals has dental issues that make chewing difficult.
Parameter Unit
Appearance: Clear and bright, free from visible sediment and water.
Colour: 2.5 max
Odour: Merchantable
Density @ 15C g/ml: 0 820 min 0 835 max
Cold filter plugging point
Winter C (*): -15 max
Summer C (*): -5 max
Cloud point
Winter C (*): -5 max
Summer C (*): +3 max
Flash point (PMCC) C: 56 min
Cetane number: 51 min
Cetane index: 46 min
Viscosity cst @ 40C: 2.0 min 4.5 max
Sulphur % Wt: 0 001 max
Copper corrosion 3 hr @ 50C: class I
Micro carbon residue:
Residue wt on 10% bottoms: 0 30
Ash % Wt: 0 01 max
Particulate matter mg/kg: 24 max
Water mg/kg: 200 max
Distillation C
% Vol Rec @ 250 C: 65 0 max
% Vol Rec @ 345 C: 85·0 min
95% Vol recovered C: 360 0
Oxidation stability mg/100ml: 2·5 max
Polycyclic aromatic hydrocarbons (%): 11 max
Lubricity, Corrected water scar: 460 Diameter @ C
Anthracite Filter Media is thoroughly selected from anthracite which yields the highest percentage of carbon. It is then
hydraulically classified to reduce mineral matter and ash to a minimum, and finally screened and washed to ensure suitability for
filtration purposes.
Anthracite filter coal or Anthrafilt is commonly used as sub-fill and as a component of multi-media filters. Anthracite filter
media is a durable media with long life and a wide temperature range. It contains no silica to interfere in the production of
ultra pure water. Anthracite promotes higher service flow rates and longer filter runs with less head loss than single media
filter beds. Backwash rates are reduced as well. Low uniformity coefficient anthracite filter media extends the life of your
filter before the media must be changed out. Higher service flows and longer filter runs than equivalent sand filters.
â?¢ Unique density allows Anthracite to be combined with other filtration media in multi-media filters.
â?¢ Lower uniformity coefficient has less oversized and undersized particles resulting in a highly uniformed bed.
â?¢ Due to its medium density, Anthracite can be used in multi-media bed filters providing a unique pre-filtration layer.
Anthracite coal filter media Application
Anthracite Filter Media is widely used in the process of water quality treatment before and after the production of chemical,
metallurgical, thermoelectric, pharmaceutical, papermaking, printing and dyeing, food and so on.
We can supply met coal (hi and med vol) as requested, need to start with 30,000 tons per
month and can work up to 110,000 tons per month; specs as outlined below:
Tonnage-25-30k tons per month
Spec: Dry-Basis
Ash-8-9.5
Sulfur-1-1.1
BTU-13,000-14,000
Vol- 26 to 32(M-H)
FSI- 9
Tonnage-1st Month-25-30k
2ndMonth-35-40k & 40k per month for the remainder of contract.
Spec: Dry-Basis
Ash-7.5-8.5
Sulfur-0.5%
BTU-13,500-14000
Vol-32-35(H)
FSI-7-8.5
Three year contract, fixed price for first two years; adjusted to market in 3rd year, or as negotiated. This is good coal and with a two year fixed price contract it should be very attractive. Buyer can inspect coal on site and contract directly with producer if required.
Producer has 20+ years in business and sells to some of the largest US power and steel companies.
Coal is a primary source of energy, mainly burned for the generation of the electricity or heat. , and is also used for industrial purposes, such as refining metals.We supply imported (Indoseian) Coal to the domestic market.
Coal is a nonrenewable fossil fuel that is combusted and used to generate electricity. Mining techniques and combustion are both dangerous to miners and hazardous to the environment; however, coal accounts for about half of the electricity generation in the United States.
With our years in the coal mining sector, we can supply the quantity of 1000-2000MT every month.
Minimum order qty: 100,000MT
Tenure of contract: 12 Months
FOB Price USD$195pmt Nett
Payment terms
Payment with SBLC MT 760 as guarantee for one month of shipment
and MT 103 against shipping documents + BL + SGS report
