Supplier: Variable frequency drive and soft starter, and also an electrical automation product solution ., both of low voltage and medium voltage, such as control panel, plc control system, progress control system.
Medium voltage variable frequency drives Product Structure Sinopak MVVFD includes integrated structure and split-type structure based on capacity. The integrated structure is adopted in low capacity MV VFD and the split-type structure is adopted in high capacity MV VFD. In terms of an integrated machine, which is compact in size, phase-transformer, power units, control systems, and power frequency bypass are fully integrated into one cabinet; In terms of a split-type machine, phase-transformer, power units, control systems and power frequency bypass are assembled in separate cabinets in which are combined on the spot. Technical Parameters Medium voltage input 3KV, 3.3KV, 4.16KV, 6KV, 6.6KV, 10KV, 11KV (-20%~+15%) 50/60 Hz±10% Medium voltage output 0~Rated voltage 0~50/60 Hz, 0.01 Hz Multilevel PWM sin wave, total harmonic distortion (THD) < 4% Performance Inversion efficiency at an rated load > 98.5%, overall efficiency (including the transformer) > 97% Power factor (within the range of speed regulation) > 0.95, power factor (at a rated load) > 0.97 Overload capacity: 110%: long-term stable operation, 120%: 1 minute, 150%: 2 seconds, and 160%: prompt protection Allowable outage duration: 200 ms (and longer under light load) Mean time between failures: > 100,000 hours Control mode: flux optimization and control with space vector PWM Acceleration/deceleration time: 1 to 3,600 seconds Switching quantity input/output:11-way/10-way Analog input: 4-way (optional: 0 to 5 V, 4 to 20 mA) Analog output: 3-way (optional: 0 to 10 V, 4 to 20 mA ) Communications: RS485 interface, Modbus-based (optional Profibus-DP and Ethernet interfaces) Control power supply: Single-phase 220 V AC, 5kVA Excitation control ( dedicated for the synchronous motor) Automatic excitation control, manual excitation control, multi-stage speed excitation control, and external excitation control for the MVVFD Environment: Operating in indoor environment without explosive or corrosive gases, conductive dust, or oil fog Operating ambient temperature: 0 degree~+45 degree Storage and transportation temperature: -40 degree ~+70 degree Ambient humidity: < 90% (No condensation) Operating altitude: Derating required for an altitude greater than 1000 meters Protection function: Overcurrent, overload, short circuit, three phase current unbalance, immediate electric outage, input/output phase loss, overvoltage, undervoltage, body overheat, transformer overheat, shutdown due to external fault, and power unit auto bypass Cooling mode: Forced-air cooling User interface: An 10-inch Human Machine Interface Protection grade: IP31
Medium voltage variable frequency drives Product Structure Sinopak MVVFD includes integrated structure and split-type structure based on capacity. The integrated structure is adopted in low capacity MV VFD and the split-type structure is adopted in high capacity MV VFD. In terms of an integrated machine, which is compact in size, phase-transformer, power units, control systems, and power frequency bypass are fully integrated into one cabinet; In terms of a split-type machine, phase-transformer, power units, control systems and power frequency bypass are assembled in separate cabinets in which are combined on the spot. Technical Parameters Medium voltage input 3KV, 3.3KV, 4.16KV, 6KV, 6.6KV, 10KV, 11KV (-20%~+15%) 50/60 Hz±10% Medium voltage output 0~Rated voltage 0~50/60 Hz, 0.01 Hz Multilevel PWM sin wave, total harmonic distortion (THD) < 4% Performance Inversion efficiency at an rated load > 98.5%, overall efficiency (including the transformer) > 97% Power factor (within the range of speed regulation) > 0.95, power factor (at a rated load) > 0.97 Overload capacity: 110%: long-term stable operation, 120%: 1 minute, 150%: 2 seconds, and 160%: prompt protection Allowable outage duration: 200 ms (and longer under light load) Mean time between failures: > 100,000 hours Control mode: flux optimization and control with space vector PWM Acceleration/deceleration time: 1 to 3,600 seconds Switching quantity input/output:11-way/10-way Analog input: 4-way (optional: 0 to 5 V, 4 to 20 mA) Analog output: 3-way (optional: 0 to 10 V, 4 to 20 mA ) Communications: RS485 interface, Modbus-based (optional Profibus-DP and Ethernet interfaces) Control power supply: Single-phase 220 V AC, 5kVA Excitation control ( dedicated for the synchronous motor) Automatic excitation control, manual excitation control, multi-stage speed excitation control, and external excitation control for the MVVFD Environment: Operating in indoor environment without explosive or corrosive gases, conductive dust, or oil fog Operating ambient temperature: 0 degree~+45 degree Storage and transportation temperature: -40 degree ~+70 degree Ambient humidity: < 90% (No condensation) Operating altitude: Derating required for an altitude greater than 1000 meters Protection function: Overcurrent, overload, short circuit, three phase current unbalance, immediate electric outage, input/output phase loss, overvoltage, undervoltage, body overheat, transformer overheat, shutdown due to external fault, and power unit auto bypass Cooling mode: Forced-air cooling User interface: An 10-inch Human Machine Interface Protection grade: IP31
Starter and Alternator and their child parts for Commercial Vehicles and Cars
Supplier: Frequency Inverter, Frequency Converter, VFD, Variable Frequency Drive, Frequency Drive, Soft Starter, MCB, MCCB, AC Contactor, Relay
Supplier: Motor control: variable frequency drives, electronic soft starters, medium voltage drive, customized engineered systems. power quality: active harmonic filter, active front end converter, statcon active static var compensator automation: machine automation, line automation, plant automation, data management & SCADA industrial electronics products
Supplier: Variable frequency drive(frequency inverter), solar pump inverter, soft starter, integrated motor control cabinet
The Variable Speed Drive FRENIC series is equipped with functions and performance to meet all types of requirements, and in addition it is easily maintained and environmentally friendly. The series lineup ranges from simple to advanced-function models, enabling model choices matching situations for use. Fuji Electric provide Variable Speed Drives perfect for automating and with energy saving devices like a fan pump or carrier and variable speeds.
With high efficiency and high power factor, Fuji Electric's Medium-voltage Variable Speed Drives contribute significantly to cost reduction and energy conservation. Fuji's Medium-voltage Variable Speed Drives products are applicable in a wide range of fields from plants to general industry and feature superior ease of maintenance.
