Xm65/25 plastic extruder 1. The application of the equipment: For the production of plastic extrusion. : the material of pvc, ldpe, xlpe, lshf, tpu ext. 2. Technical parameters 1) production scope: the diameter of the conductor: 1-10mm Finished diameter size: 2.5-13mm 2) extrusion capacity: max 80kg/hr 3) motor power: 15kw(frequency conversion) 4) heating power: 16kw(three section heating with air cooler) 5) center height of the machine: 1000 mm 6) pay-off spool specification: diameter 630mm(pn 400-630mm) 7) take-up spool specification: diameter 630mm(double spool) 3. Composition of the equipment 1) 630mm no-spool pay-off 2) elevating tension straightening machine 3) sj65 extruder with auto feeding. 4) water cooling sink 5) dry-printing device 6) diameter measure device 7) 600 mm/ 350mm wheel traction machine 8) 630mm double spool take-up machine 9) control box Standard package.
We offer continuous extrusion machines from 144 kg/hr output upto 2800kg/hr output. We also offer continuous extrusion line for aluminium wire 140-220kg/hr output with product cross section of 10-100sqmm. We also additionally offer continuous extrusion machines machines aluminium tube ,wire, bus bar and also for copper alloy like CuAg,CuSn,CuMg.
The circle thread made from the machine are applicable for the manufacturing of ropes/cables, fishing nets, construction safety nets sun shielding nets, artificial hari, mosquito nets, brushes, as well as protective nets for the cotton fields. The machine is compacted in its structure. ADC motor is used for stretching, thus a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters. The spinnerets are produced by the most advanced way, so that the flatness and uniformity of the thread can ensured. Installing Dimensions 17000¡Á1300¡Á1450 mm 21000¡Á1450¡Á1450 mm 23000¡Á1550¡Á1450 mm.
PP hollow profile sheet extrusion line is designed to manufacture pp hollow profile sheet which can be widely used to many fields including decoration, advertisement, packaging, building and even transportation sound insulation. The specific application are below for your reference. 1250mm pp hollow profile sheet extrusion line, pp hollow profile sheet extrusion machine, pp hollow profile sheet extrusion equipment 1650mm hollow profile sheet extrusion line, pp hollow profile sheet extrusion machine, pp hollow profile sheet extrusion equipment 2150mm hollow profile sheet extrusion line, pp hollow profile sheet extrusion machine, pp hollow profile sheet extrusion equipment 2550mm hollow profile sheet extrusion line, pp hollow profile sheet extrusion machine, pp hollow profile sheet extrusion equipment.
Scraper is a parts of continuous extrusion machine to make busbar. We are a manufacturer of production line of copper busbar and spare parts of continuous extrusion machine. The spare parts of extrusion machine are including extrusion wheel, chamber, chamber lid, coining roller, scraper, dies, abutments (nose), side wheel, drawing dies and so on for conform extrusion machine.
Aluminum Tubes Line LJ60 Horizontal Elbow Squeezer or horizontal extrusion press is a specialized equipment which extrudes the aluminum slug into germ tubes, cylindrical objects and other shapes. Main technical parameters: A. Tube diameter range: 11mm-22mm B. Tube length range:
The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump. The features of this technology: 1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar; 2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding; 3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines; YJ650 stamping equipment 4.No flammable gases, not affected by rainy or cold weather; 5.Relieve congestion of the connecting point, facilitated concrete pouring; 6.No professional and experienced worker needed, able to connect changed steel bar of different diameters; 7.Save 80% of connector steel consumption. The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."
The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump. The features of this technology: 1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar; 2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding; 3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines; YJ650 stamping equipment 4.No flammable gases, not affected by rainy or cold weather; 5.Relieve congestion of the connecting point, facilitated concrete pouring; 6.No professional and experienced worker needed, able to connect changed steel bar of different diameters; 7.Save 80% of connector steel consumption. The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."
Plastic Teflon PTFE Rod Extruder Machine For PTFE Rod( 4-20mm) This PTFE extruder is able to extrude rod which dia from 4mm to 20mm. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Ram extrusion machine for Teflon rod The China vertical RAM Extruder Machine is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould.Range of diameter PTFE Extrusion 4 to 20 mm, Heating zones 4-6 zones.The complete electrical control is laterally fastened at rod ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. Five temperature regulators are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: physical property , like Specific Gravity and Elongation, outside of PTFE rod diameters and PTFE product heating length.PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Rod Extruder Dia 4mm-20mm Technical Data Description Model No. Machine model PFLB-20 Plastic Extruder PTFE Power 12 kw Min - Max Dia 4-20 mm Tolerance 0-0.2mm+ Length Unlimited Production Per Hour 7-14kg Electricity Consumption Per hour 2 kw Weight of the Machine 930 kg High of the Machine 2150 mm Floor area of the Machine 3.5 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 s Deliver LT 30 Days Features 1, Automatic control 2, Easy to operate 3, Low power consumption 4, Product size stability 5, Precise sintering 6, Environment-friendly and Energy-saving Application: PTFE RAM Screw Extruder products rod, and it has the best chemical corrosion resistance and the dielectric properties, not aging, not sticky, it also has the lowest friction coefficient. So the rod has a wide range of applications
