We are Manufacturer of high grade Copper & Aluminium based Alloys Ingots, Billets
We manufacture all grades of Al & Cu Alloys viz. Gunmetal, Tin Bronze, Leaded Bronze, Manganese ,Phosphorous Bronze Aluminium Ingots etc as per JIS, BS, ASTM, DIN, IS, EN & UNI STD.
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Key Properties of Copper Alloys
Excellent heat conductivity.
Excellent electrical conductivity.
Good corrosion resistance.
Good biofouling resistance.
Good machinability.
Retention of mechanical and electrical properties at cryogenic temperatures.
Non-magnetic.
In the form of Sheets, plates, strips, pipes & fittings from South Korea & China. Nickel Alloys, brass, bronze, Stainless steel are the other materials we offer.
Price: -17%LME
Origin: United States
Delivery: FOB
Payment terms:15% down payment through bank transfer followed by an irrevocable & confirmed documentary letter of credit payable against documents at the seller's bank.
DL Industry Group Limited is famous supplier, exporter and manufacturer of beryllium relevant products since 2018
Main producs:
1. Beryllium metal
Beryllium metal can be used to make beryllium powder, beryllium rods, beryllium foil, etc., and can be used in nuclear reactors, nuclear reactor devices, space telescopes, and medical detection beryllium windows.
2. Beryllium oxide
CAS: 1304-56-9.
Molecular formula: BeO
Beryllium oxide is mainly used in the manufacture of special ceramics, and glass. It can also be used as nuclear reactor fuel and moderator, and as an organic reaction catalyst.
3. Beryllium Copper Master Alloy
Other Name: Copper Beryllium Mater Alloy, Beryllium Copper Ingot
By adding beryllium copper master alloy during the casting process of beryllium copper alloy, beryllium copper alloy products with high strength, high conductivity and high elasticity can be obtained.
Main production: CuBe3.3, CuBe4(Beryllium Copper Master Alloy Be:3.8-4.3) and CuBe10(Beryllium Copper Master Alloy Be>9.8).
5. Beryllium Aluminum Master Alloy
Main production: AlBe3, AlBe5
Beryllium Aluminum Master Alloy AlBe3 is mainly used for producing magnesium aluminum alloy or named magnalium alloy
Beryllium Aluminum Master Alloy AlBe5 is mainly used of producing the aluminium silicon alloy
The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase.
The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance.
The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion.
Product name
ALLOY 20 STAINLESS STEEL
Thickness range
0.3mm-3.0mm,
Width range
600mm-1500mm
Length
2000mm, 2438mm, 3048mm
Size
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required
Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
The Incoloy825 has the following functions:
Good resistance to stress corrosion cracking.
Good resistance to pitting and crevice corrosion
Good oxidation resistance and non oxidative thermal acidity.
It has good mechanical properties at room temperature and high temperature up to 550
Certification of pressure vessels with manufacturing temperatures up to 450 C
Incoloy 825 metallographic structure:
Incoloy 825 alloy has a stable face centered cubic structure. Chemical composition and appropriate heat treatment ensure that the corrosion resistance will not be weakened by sensitization.
Incoloy825 Corrosion resistance:
Incoloy825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
Incoloy825 is widely used in various industrial fields where the working temperature is no more than 550.
Typical applications include:
Heating pipes, containers, baskets and chains for sulfuric acid pickling plants.
Seawater cooling heat exchanger, marine product pipeline system, acid gas environment pipeline.
Heat exchanger, evaporator, washing, immersion tube, etc. In phosphoric acid production.
Air heat exchanger in petroleum refining
Food Engineering
chemical process
Flame retardant alloy for high-pressure oxygen
Product name
INCOLOY Alloy 825
Grade
INCOLOY Alloy 825
Thickness range
0.3mm-3.0mm,
Width range
600mm-1500mm
Length
2000mm, 2438mm, 3048mm
Size
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required
