We are production of Wood Chips from raw material from waste wood log, stems & wood branch, wood veneer and another wood waste that we doing processing by machine crusher to make Chips size with specification : Moisture: 45% max, Length: More than 40mm: 5% max, From 9 - 40mm: 82% min, From 4.8 - 9.5mm: 5% min, Less than 4.8mm: 5% max, Wood bark: 3%+/-, Foreign matters: 1% max, Average Size : 2-4cm with a thickness of about 2-8mm.
Over 45mm : 10.0% Max 45mm 19mm : 50.0% Min 19mm-5mm : 35.0% Max 5mm-3mm : 3.0% Max Under 3mm: 2.0% Max Bark Shall and rot shall not exceed 1.5% Chips Shall be free from char and other foreign materials such as sand, stones, plastic, and coal etc. The moisture content of the wood chips approximately 35 % - 38%
Over 45mm : 10.0% Max 45mm 19mm : 50.0% Min 19mm-5mm : 35.0% Max 5mm-3mm : 3.0% Max Under 3mm: 2.0% Max Bark Shall and rot shall not exceed 1.5% Chips Shall be free from char and other foreign materials such as sand, stones, plastic, and coal etc. The moisture content of the wood chips approximately 35% - 38%
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%