- Lithium battery 2000mAh - Automatic charge stop - LED night lighting - W- Automatic charging and stopping - LCD display Tire Pressure & Battery Power Indicator - Back light display, easy to read at dark place - Support : Bar / Kpa / Psi / Kg Display - Light & small, easy to use at one hand and space saving - With Lithium battery and 12V car charger base - Quiet and low noise, with a variety of gas nozzles, a wide range of applications
Plunger Type Pumps, Hydraulically Actuated Diaphragm Type Pumps, Mechanically Actuated Diaphragm Type Pumps, Solenoid, Operated Diaphragm Dosing Pumps, Complete Skid Mounted Dosing Systems, Chemical Process Pumps, Seal free Magnetic Drive Pumps, Progressive Pumps, Y Type Strainers, Pulsation dampners, etc.
Structural characteristics Unique motor design Delrin impeller Internally mounted mechanical seal Low power consumption Fitted with terminal block Light in weight-portable Compact mechanical design Better aesthetics and finish Stainless steel body Carbon bush Stainless steel thrust ring Stainless shaft , strainer and coupling Operating conditions Clean water not containing abrasive particles Liquid temperature up to 35ª c The cooling media temperature should not be more than 40ª c Motor 2-pole, single phase, 50 hz, 220-240 v Insulation class b Protection ip 57
Flow: 7m3/h Head: 18m Power: 1.1kw Material: cast iron Outlet dia: 40mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries
Qj submersible deep well pumps, submersible pumps, multistage submersible pump Product description: Qj submersible pump is directly connected with motor, which applies to groundwater extraction from deep wells. It can also be used in rivers, reservoirs, canals and other water projects. The pump is mainly used for irrigation and the mountain plateau drinking water and also for the cities, factories, railways, mines, construction sites for drainage and water supply. Main features: 1.Motor, pump are put into operation in the water, so the safety and reliability are ensured. 2. There is no special requirement for the materials of the tube and pipe. Web:www.Zlby.Net/ Packed in standard wooden case
Submersible raw water pump 175kw & 75kw to sell. Second hand - less operation time.
100% reliability in your agriculture irrigation HP Range: 7.5 - 60 Head Range: 12 - 325 Max. Discharge: 850 - 1750 LPM Dia: 128mm OD.
YSSP250C-2: 17.2/18.5kg 22í-16í-31cm 250W 230V/50Hz&115V/60Hz 5000l/h 46í-34í-33cm/4pcs YSSP350C-2:18.2/19.5kg 22í-16í-31cm 350W 230V/50Hz&115V/60Hz 6000l/h 46í-34í-33cm/4pcs YSSP400C-2:18.5/19.7kg 22í-16í-31cm 400W 230V/50Hz&115V/60Hz 7000l/h 46í-34í-33cm/4pcs YSSP450C-2:18.6/19.8kg 22í-16í-31cm 450W 230V/50Hz&115V/60Hz 8000l/h 46í-34í-33cm/4pcs YSSP500C-2:18.8/20.1kg 22í-16í-31cm 500W 230V/50Hz&115V/60Hz 9000l/h 46í-34í-33cm/4pcs YSSP550C-2:19/20.5kg 22í-16í-31cm 550W 230V/50Hz&115V/60Hz 9500l/h 46í-34í-33cm/4pcs YSSP750C-2: 20/21.5kg 22í-16í-34cm 750W 230V/50Hz&115V/60Hz 10500l/h 46í-34í-35cm/4pcs YSSP900C-2:21.5/23kg 22í-16í-34cm 900W 230V/50Hz&115V/60Hz 12000l/h 46í-34í-35cm/4pcs. 46*34*33cm/4pcs
Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump Model: 200QJ63-28/2 Flow: 63m3/h Head: 28m Power: 7.5kw Material:Cast iron/stainless steel Impeller material:Cast Iron/stainless steel Pressure:Low Pressure Warranty:12 Months Color:Blue Place of Origin: ,China (Mainland) Deep well submersible water pump Overview: deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump structure&model meaning 1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump. 2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor. 3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly. 4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part. 5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/