Aurochs Oil Solutions Ltd.

Product Description - EN590 10ppm Price of product ( USD price or FOB price) - Market Price Product origin - Oil is from a top global petroleum oil producer Key Specifications/Special Features - Price will be quoted FOB and in USD. Minimum Order Size and Packaging details - Quantity of oil shipment must be worthy for transport on ships that transport crude oil and petroleum products in international waters.

EN590 10PPM OFFER Price:$530/MT 1. Buyer issue ICPO and TSA containing the seller's working procedure with scanned copy of buyer's passport along with buyer Company certificate of incorporation. 2. Seller issues commercial invoice of the product in tanks at the port, to be sign along with the attached below partial proof of products. 3. Upon receipt of the signed CI and ATV from buyer storage tank for verification seller issue the below pop documents. -48 hours fresh SGS -INJECTION REPORT -BILL OF LADDING. -TITTLE OF OWNERSHIP TRANSFER -TSR OF WHERE THE PRODUCTS STORE TO VERIFY PHYSICALLY. 4. Buyer inspects by SGS on buyer s expenses and sends TSR. 5. Upon successful dip test in tanks, product will immediately be injected into Buyer's tanks. Buyer makes payment for the product via MT103/TT POINT NO 1,2,3 Is most important . If u can provide then can deal . If not do not waste time 1) Icpo 2) TSA 3) ATV

COMMODITY: EN590-10ppm ORIGIN: NETHERLANDS DELIVERY: FOB ROTTERDAM LOADING / ROTTERDAM QUANTITY TRIAL: 100,000 MT QUANTITY MONTHLY: 200,000 MT CONTRACTUAL (Long-Term 3 TO 5 YEARS) QUANTITY CONTRACT: ROLL & EXTENSION CONTRACT LENGTH: MINIMUM 12 MONTHS / 52 WEEKS SPECIFICATION: Fresh SGS Report QUALITY:  As Per Inspection DISCOUNT: -USD 70 TO USD 80 (from the West European Pallet Price) PROCEDURE: End buyer sends his ICPO, CIS, TSA, or CPA and approved procedure by buyer. Ministry of Energy start due diligence. After approval of due diligence, the buyer will receive a confirmation through the XXXXXXXX. After exchange of the bank coordination of the supplier/seller, XXXXXXX. The buyer will start official BANK TO BANK communication to send his BCL and proof of Funds. BCL, POF is equivalent to two times delivery After confirmation of BCL, POF the SELLER / SUPPLIER sends FRESH SGS to the BUYER. The BUYER verifies the fresh SGS report via his logistic company or any other organization he wants. Finally, start the DIP Test in Seller / Supplier tanks and after that immediately pay for inspections and seal the product in the Tank of the SELLER / SUPPLIER. Then exchange the final document and the buyer receives the title. The above is for 1x trial and 12x contract Note: For the contract of 12x delivery, we donot ask any LC, DLC, or SBLC. Because our seller right now operates on behalf of the government. It means,

Attention. Looking for serious buyers. EN590 10ppm NWE Platt Price, with -10 % in Discount 1. The Buyer Issue ICPO, C/P to the Seller along with the CPA. 2. The Seller issues Commercial Invoice for the available quantity in the Sellerâ??s Storage Tank to the Buyer along with the Commitment to Supply 3. The Buyer signs and returns the CI to the Seller with the buyers vessel information and details of port clearance through the nominated vessel terminal. 4. Upon receipt and confirmation of the vesselâ??s information the Seller issues the POP documents as below and send to the Buyer within 48 hours: a. Fresh SGS (not older than 48 hours) b. DTA (Dip Test Authorization) c. Certificate of origin d. Tank Storage Receipt (TSR) e. ATSC â?? Authorization to Sell and collect f. Injection Report g. NCNDA/IMFPA. 5. The Buyer conducts Dip Test in the Seller's Reservoir. Upon successful Dip Test, the injection commences immediately into buyers vessel as scheduled. 6. Within Twenty-Four (24) hours, Buyer issues 100% TT wire transfer payment to the Seller. The Seller transfers the title ownership to the Buyer. 7. The Seller pays commission to all the intermediaries the buyer and seller. 8. The Seller issues 12 Months Contract for the Buyerâ??s review and execution

PROCEDURE ON CIF BASIS Product EN590-10ppm MOQ : 50.000MT per shipment PRICE : US$480/MT Commision : US$ 5/ MT for Buyer's Side US$ 5/ MT for Seller s Side 1.The buyer sends the ICPO along with a Company Profile and passport copy of bearer. 2. Seller acknowledges buyer's ICPO and issues Contract to buyer open for amendment, buyer signs and returns the Contract to the seller. 3. Seller makes the final signature on the Contract and sends the final approved, endorsed to buyer. Within 2-3 days seller issue partial PPOP document to buyer as follow: a) statement of availability of product b) product certificate of origin c) commitment to supply d) product passport 4.Buyer's bank in accordance with seller's verbiage issues agreed payment instrument SBLC MT760 /DLC MT700 within 7 working days for the product value and seller's bank issues operative 2% PB in favor of buyer. If buyer fails to issue SBLC/DLC within the validity date, the buyer will be obliged to secure the product allocation until the instrument is in place. 5.Whereby buyer could not meet up with the instrument, buyer will negotiate with refinery a refundable guarantee deposit in replacement for instrument. Refinery-supplier will send Charter Party Agreement [CPA] details to buyer confirmation and endorsement. 6. Refinery-supplier release FULL set of PROOF of document accordingly to the below and performance bond guarantee to buyer bank and upon confirmation receipt of full POP document, against shipping documents/ inspection by SGS or CIQ at discharge port upon the arrival of the vessel at the port of delivery, after quantity and quality of the product is checked and confirmed. a) copy of products certificate of origin b) copy of statement of availability of the product c) copy of export license certificate d) copy of CPA to transport the product to the loading port e) copy of port storage agreement f) copy of the vessel questionnaire 88 g) copy of tank storage receipt (TSR) h) copy of the charter party agreement with the shipping company i) copy of bill of lading (BL) j) fresh cut SGS report/ dip test letter 7. Buyer bank releases payment to seller bank within 5 days via MT 103 T/T wire transfer after inspection of product at discharge port and receipt of all the shipping documents as indicated below and seller pays all the intermediaries involved

Now you want to buy from a refinery, there are only two ways; FOB or CIF 1) If it is CIF, LDC, SBLC is accepted; IRLDC 2) If it is FOB the buyer only has two scenarios: a) That it has its tanks ready to inject, either placing the ATV in the name of the refinery or the DTA being signed by the buyer's farm b) If it is tank to vessel, You must, if and only if, extend the tanks for two days to verify the product and inject it into the vessel. LDC is accepted under contract, payment MT103. that is the scenario my friend. It is very simple. The buyer has to follow the Refineries procedure to purchase No Refinery that accepts a product location will fail to meet its commitments. For Singapore there is a CIF seller. It cannot be FOB. Refineries do not have tankers in Singapore to sell FOB. to be addressed to the representative of the refineries: The FOB price in Rotterdam of the EN590 10PPM is currently 480 USD/MT And the CIF in Singapore is 560 USD/MT. Amount of 200,000 MT/month The refineries respect the price at which it is contracted during the 12-month contract.

EN590 10ppm 100,000MT ~ 200,000MT (TTV) * Pick up from Fujairah Origin: Azerbaijan FOB PROCEDURE (Tank To Vessel) 1. The buyer issue ICPO and the CPA. 2. Seller release the commercial invoice within 48 hours. 3. The buyer sign and return the C.l to seller 4. Seller issue the p-pop document as below A) Fresh SGS. B) Product Quality passport C) Certificate of origin D) Commitment to supply E) Statement of product availability 5. The Buyer provides ATI and Q88 from his or her shipping company 6. Seller issue unconditional dip test authorization, TSR to buyer, buyer conduct dip test in seller tank at buyer cost 7. After a successful dip test in the seller's tank, the buyer makes 100% payment for the fuel via MT 103/TT to the seller within 24 hours. 8. After payment, the seller begins pumping fuel into the buyer's vessel. 9. After the successful injection seller issue A) Allocation license B) Title ownership transfer affidavit. 9. After receiving 100% payment, all intermediaries receive payment from the Seller and Buyer through a signed NCNDA - IMFPA agreement.

EN590 10ppm 100,000MT ~ 200,000MT (TTV) * Pick up from Fujairah Origin: Azerbaijan FOB PROCEDURE (Tank To Vessel) 1. The buyer issue ICPO and the CPA. 2. Seller release the commercial invoice within 48 hours. 3. The buyer sign and return the C.l to seller 4. Seller issue the p-pop document as below A) Fresh SGS. B) Product Quality passport C) Certificate of origin D) Commitment to supply E) Statement of product availability 5. The Buyer provides ATI and Q88 from his or her shipping company 6. Seller issue unconditional dip test authorization, TSR to buyer, buyer conduct dip test in seller tank at buyer cost 7. After a successful dip test in the seller's tank, the buyer makes 100% payment for the fuel via MT 103/TT to the seller within 24 hours. 8. After payment, the seller begins pumping fuel into the buyer's vessel. 9. After the successful injection seller issue A) Allocation license B) Title ownership transfer affidavit. 9. After receiving 100% payment, all intermediaries receive payment from the Seller and Buyer through a signed NCNDA - IMFPA agreement.

FOB TRANSACTION PROCEDURE CI, DIP & PAY 1. Buyer issues ICPO, Company Registration Certificate and Data page of buyer's Passport copy including POF (BCL) Bank Confirmation Letter for Trial Quantity amount. 2. Seller receives buyer's ICPO. Seller issues Commercial Invoice (CI) for the total product in seller's leased tank in port terminal for buyer's endorsement. 3. Buyer endorsed seller's Commercial Invoice (CI) and return CI, along with buyer's own/leased Tank Storage Agreement (TSA) from buyer's Logistic Company as a proof of buyer's availability of storage facility. 4. Seller acknowledged the endorsed CI as well verifies buyer's TSA. if well satisfied, Seller issues to buyer the following POP documents; a Copy of DIP-TEST AUTHORIZATION - D.T.A. to buyer, to be endorsed by Buyer Tank farm. b Copy of Legalized Commercial Invoice. c Copy of Export License d Copy of Guarantee Letter to Supply e Copy of Statement of Availability of Product 5. Buyer sends copy of endorsed DTA to Seller within 48hrs. Upon receipt of endorsed DTA, seller issues the following POP documents to the buyer and NCNDA & IMFPA will be signed and endorsed for the protection of all intermediaries involved in the transaction: a Copy of Certificate of Origin; b Copy of Commitment to Supply; c Copy of Authorization to Verify d Copy of Authorization to Sell and Collect e Copy of Accreditation certificate f Copy of Product Allocation Certificate g Copy of Product Passport h Copy of Fresh SGS Report i Copy of Injection Report j Copy of Tank Storage Receipt/Reservoir Receipt k Copy of GPS coordinates/ location of Seller tanks at loading port including tank details, tank farm contact person and telephone number. l Copy of NCNDA & IMFPA document. 6. Buyer immediately orders his SGS inspection team to proceed for the dip test on the product in the tank at buyerâ??s expense. 7. Upon successful and satisfactory Q&Q test. Buyer provides his TSR and ATI to enable seller inject the product into the buyerâ??s tank. 8. Buyer pays for the total cost of the product in the tank or injected into the buyerâ??s tank via MT103 to sellerâ??s nominated bank account. 9. Within 24hours upon receipt of the payment, seller pays commission to mandates / intermediaries that are involve in the deal. 10. Seller issues title change/transfer of product to buyer and buyer fully take over the tank and the product. *NOTES: * If buyer can pay one day TSR and tank company (@buyer) can endorse DTA, this will save money COMPARED to paying continuously for 5 days TSRs to get pop.