CI DIP AND PAY FOB TTT Rotterdam PROCEDURE 1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer. 2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice. 3.seller will provide the Proof of Product (PPOP) documents for product verification Which include �¯?�¼ Tank Storage Receipt (TSR) �¯?�¼ Certificate of origin �¯?�¼ Statement of Product Availability, �¯?�¼ Authorization to Verify (ATV), and �¯?�¼ Dip Test Authorization (DTA) Letter. 4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule. *Or* Buyer must have a minimum of 10 days TSR to avoid one day tank extension. 5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 â??) and heavy diesel (with a boiling point range of about 350-410 â??). Widely used in large vehicles, railway locomotives, and ships. The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.
We offer Jet A1 & EN590 (10PPM) direct from refinery. Anyone interest, do feel free to approach +
EN590 10PPM FOB Rotterdam / Fujairah Tank To Vessel Refinery Tank To Vessel/dip & Pay Procedure 1. Buyer issues official ICPO addressed to the refinery or representative. 2. Seller issues Commercial Invoice (CI), buyer signs and returns the signed invoice to the seller. 3. Seller issues to the buyer the partial proof of product documents: ATSC - Authority to sell and collect Seller TSR DTA - Dip Test Authorization PRODUCT PASSPORT - Product analysis report from a renowned inspection company. Statement Of Product Availability Duly Signed AND Notarized By The Appropriate Authorities. Commitment Letter To Supply ATV Authority to verify the existence of the product via email or phone call. 4. Buyer obtains port and terminal access permit through the tank farm in order to gain access to conduct dip test 5. After a successful Dip Test in Sellerâ??s tanks, Buyer takes over seller's tank or Seller injects into buyer's vessel / Tank and buyer conducts its DIP TEST Inspection for Q & Q of the Petroleum Products aboard vessel / Tank. 6. Buyer after a successful Q &Q Dip test on the product, the buyer makes the payment for the total value of the product injected into the tanks through the means of MTI03 - TT. 7. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. The seller pays all intermediaries involved in the transaction
Greetings, we trust this message finds you well. We are reaching out to express our warmest regards and extend an invitation for potential collaboration. In order to better understand your requirements, we kindly request you to share the requested quantity for EN590 10PPM. This information will allow us to tailor our offer to meet your specific needs effectively. With authorized access to reputable refineries, we take pride in ensuring the delivery of high-quality products, providing exceptional service and buyer friendly procedures. Our commitment is to foster a mutually beneficial business relationship that goes beyond expectations. Looking forward to your prompt response and the opportunity to discuss further details. Origin : Kazakhstan / Russia
EN590 10ppm (ULSD)
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
EN590 10PPM 50PPM Origin Non-Sanction Country
Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm/s (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60�°C Maximum 460 micro Copper Strip Corrosion (3h @ 50�°C) Class 1 Oxidation Stability @ 110�°C Minimum 20 hour FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 mi
En 590 Gas Oil Is A Gas Oil With A Sulfur Concentration Of 10 Ppm. It Has A Higher Cetane Number Than A2 Class Gas Oil (another 10ppm Sulphur Content Class Of Red Diesel), Making It More Suited To Internal Combustion Engines In Off-road Cars. The Seller Will Issue The Necessary Documents As Agreed In The Delivery Procedure. Contact Us In Order To Issue The Soft Offer To Your Company For Proceeding. Seller Working Procedures, Terms, And Condition. Fob Price: Us$610.00 -- $620 Per Metric Tons (negotiable) Origin: Kazakhstan Key Specifications/Special Features: TEST UNITS METHOD RESULT Density at 15 C Kg/m2 EN ISO 12185 845.0 API gravity Kg/L ASTM D 1250 34 Ash content %m/m EN ISO 6245 0.01 Flash point C EN ISO 2719 Above 55 Sulphur content Mg/Kg EN ISO 20884 10
