The AEC1112- Computerized Universal Testing Machine with a maximum load capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton with the provision of testing various samples of metals and its different alloys for the testing in tensile mode for round and flat specimens as per the national and International standard like ASTM, DIN, ISO, EU and IS standards etc. capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton.
1.Model:WDW-100 2.Product name:computerized electrical universal testing machine 3. Applications of testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 4. Features of testing machine 1) Adopting aluminum alloy cover, with attractive streamline structure 2) Mainly used to test mechanical properties for metal, non-metal and composite materials 3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications 4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out. 5) With remote control box to realize speed adjustment of crossbeam, flexibly and freely switched 6) With functions of automatic return to original position, intelligently, efficiently, quickly 7) With limit position function of any working position and over voltage, over current protection functions, reliable and safe 8) With many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control 9) Switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison. 5.Spec. of testing machine
Main function and characteristic: This machine adopts hydrocylinder underneath type, the assembly key of oil-fountain-oil-pump motor setíóflooding valveíóchange-direction valve are the brand products, the computer measure display of amplifier is ourselves produce, in good interface. It can display test forceíótest force peak valueíóloading speed. It according with the requirements of the standard of< GB/T228-2002 Metallic materials- Tensile testing at ambient temperature>,it used do tensileíópressureíóbending and cutting for metal and non-metal materials. Main Technical Parameters: Max. test forceú¦ 1000kN Scope of test force measureú¦4-1000kN Accuracy of measure test forceú¦í+1% Journey of piston ú¦ 250mm Max. journey speed of pistonú¦50mm/min Displacement measure distinguishú¦ 0.01mm Deformation measurementú¦Four-shelves measure, each shelf full measuring span of 20%, í+0.5%FS Max.tensile spaceú¦750mm (Include piston journey) Max.pressure spaceú¦ 580mm Thickness of flat specimenú¦ 0-40 mmú+ Dia. Of round specimenú¦ ª¦13-ª+60mm Size of platenú¦ ª+160mm Distance of bending testing rollsú¦60mm-700mm Width of rollsú¦ 140mm Beam travels speed about: 120mm/min Mode of clampú¦Hydraulic pressure clamp Size of outlineú¦ 1000í-700í-2350mm
Its new floor type universal material testing machine which applied by latest design and producing skill to have strong structure, saving transmission power and electric current without specific power system. Undoubtedly we still keep the advantage for testing precision, simply operation, expand strong. Its the best choice for material testing machine.
Application: For static and cuasi-static test (low frequency fatigue) for high loads in many types of tests. Specially indicated to switch test mode, thanks to its dual space design. Double test space frame: With high structural stiffness,4 columns and 2 screws with double testing space The upper space is intended for tensile tests, and the lower for compression, shear, bending, folding, etc. Manufactured according to Standards EN 10002-2; ASTM E4, ISO 7500-1; DIN 51221 and BS1610 guide. Mobile crossbar separates the two test zones and is positionable in height by means of two spindles driven by an integrated electric motor frame.
This series materials testing machine product group was primarily developed for standardized tests on ma- terials and components. Used in conjunction with the intuitive KStest software. Typical test applications for wide range of tension, compression, bending, shearing and low cycle test, include metal, rubber, plastic, spring, high strength steel (HSS), aerospace and automotive structures, screws, nuts, etc. Standards: ASTMA370, ASTME4, ASTME8, ASTME9, ISO6892, ISO7438, ISO7500-1, EN10002-4, GB/T228-2002, GB 16491-2008, HGT 3844-2008 QBT 11130-1991, GB13-22-1991, HGT 3849- 2008,GB6349-1986, GB/T 1040.2-2006, ASTM C165, EN826, EN1606, EN1607, EN12430 etc
This electronic universal testing machine consist of host machine, mechanical limit switch, electrical system, test accessaries, etc . It is suitable for tensile, compression, bending and other mechanical property for metal and non-metal material, such as steel, aluminum,copper,geotextile,plastic,rubber,thread,wood,alloy,PVC,spring,electrical wire and cable, composite material, profiled bar, waterproof roll and all ASTM, ISO, JIS, DIN, BS, EN relative material mechanical testing standards. The machine is calibrated according to international norms requirement as ASTM E4, ASTM E83, ISO7500-1, ISO9513 and supply a full detailed calibration certificate. They are essential testing instruments for quality control section, university and college, research institution and mining enterprise quality lab.
We are the reputed supplier and importer of Universal Testing Machine in India - Contact us now to Get Quick quote for Universal Testing Machine in India by JJ Test. This device is ideal for measuring tension, compression, bending, peer and tear in plastics, metal wires, nylon wires textile, packaging etc.
Main technical parameters: Notechnical parametertld-20a 1max load20kn 2accuracy gradegrade 1 3measuring range0.2%~100% 4load measuring accuracyr.O.�0.5% 5testing force resolution1/200000fs 6range of testing speed0.001�?500 mm/min 7speed accuracyr.O.�0.5% 8measuring accuracy of displacementr.O.�0.5% 9measuring system of deformation5~800mm 10measuring accuracy of deformationr.O.�0.5% 11mechanical structuregate model 12valid testing space1200mm 13valid testing width350mm 14position limit protectionselectronic position limit protection 15over current protectionexceed 20% voltage, machine will stop automatically 16overloadexceed 10% max load, machine will stop automatically 17power supplysingle phraze 220v�10% 18power0.75kw 19weight190kg 20dimension0.8*0.5*1.6 Other functions All machines are controlled by microprocessor, it can be controlled independently, menu operation, flexibly set, lcd, english interface. All the machines equipped with micro printer to print the result. May match pc, the special software can measure the performance data of various materials. May match macro-deformation measure system Additional load cell can expand the measuring range of load. According to different voltage, the user can chose the different power adaptor.
1. Applications of testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 2. Features of testing machine 1) adopting aluminum alloy cover, with attractive streamline structure 2) mainly used to test mechanical properties for metal, non-metal and composite materials 3) adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications 4) after test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out. 5) with remote control box to realize speed adjustment of crossbeam, flexibly and freely switched 6) with functions of automatic return to original position, intelligently, efficiently, quickly 7) with limit position function of any working position and over voltage, over current protection functions, reliable and safe 8) with many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control 9) switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.
