Paraflex UNI-R Multistrand FR PVC Insulated Cu. Paraflex Multistrand FR/FRLS PVC insulated Cu. Paraflex round multicore Flexible PVC insulated Cu. Paraflex submersible (3-coreflat) and UNI-R Submersible PVC Insulated Cu. Paraflex Aluminum Unarmored, Single Core twin flat 3 core and 4 core round solid and XLPE Aluminum Twin flat (Heavy Duty) Paraflex PVX VIR Copper Cabales. Paraflex Co-Axial wires. Paraflex Oxygen Free speaker and camera wire. Paraflex twin flat and copper flexible cables. Paraflex PVC FR tape. to 630 sq.mm core, 2 core, 3 core, 3.5 core and 4 core both in Al & Cu. Under IS: 7098 (Part 1), IS: 1554 (Part 1). Aerial Bunch cable IS: 14255 range 16 sq.mm to 95 sq.mm. PVC Rigid Conduits IS 9537 Part-3, 2003
Power (W): 200; CCT (K): 6500; Luminous flux (lm): 1200; CRI: >80; Life span (hrs): 30,000; IP4X; Solar Panel: Poly Crystalline Technology, Power (W): 20, Voltage (V): 6, Life span: 20 years; Battery: Lithium LiFePO4 Technology, Capacity (Ah): 15, Voltage (V): 3.2; Life span: 10 years; Five-level dimming with remote control; CE, KC certified can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Main matter in this product page: We Manufacture , Supply , Install highly efficient Solar Street Lights of two categories : Solar Integrated / Solar All-in-one Street Lights : These are Solar All-in-one lights which means LED s , Solar Panel , Lithium (LFP) battery , Charge controller , BMS ( Battery Management System) , PIR (Motion Sensor) are inbuilt in one single unit Ranges available from 15 watt to 100 watt Solar Semi Integrated lights : These are Solar Street lights on which Solar Panels are mounted separately on top of pole with help of mounting frame and remaining components like LED s , Lithium (LFP) batteries , Charge Controller , BMS ( Battery Management System) are kept in one single unit . Ranges available from 15 watt to 60 watt Description / Features : No External power supply from DG set / EB line is required to run these lights they are completely self powered Comes with 5 years complete warranty including battery pack They come with back up of 18-20 hours a day and designed to operate in all climatic conditions with minimum back up time of 14-15 hours a day. No External cables required cable cost will be completely saved Saves Fuel cost / Energy cost these assemblies generally gets breakeven in less than 2 years Auto Dusk to Dawn Operation is programmed Auto On-Off of lights sensing ambient light Equipped with highly efficient LiFePo4 Lithium batteries and they has cycle life of 5000 cycles Highly efficient and tier 1 grade MONO PERC Solar Modules are used PIR (motion) sensor can be equipped as per requirement and they sense motion from distance of 10 meters. Completely safe to use at construction sites since no cabling and cable routing are required and they are complete DC systems . Warranty : All components of Solar Street Lights comes with 5 years complete warranty including that of battery pack Applications : Stock Yards / Storage Yards Site Offices Corporate Offices Residential projects , Layouts Gardens , Parks Shopping malls Parking Toll Plazas Highway Lighting Streets Lighting Re-walls construction sites Bridges Structural Construction sites
Main matter in this product page: We Manufacture , Supply , Install highly efficient Solar Street Lights of two categories : Solar Integrated / Solar All-in-one Street Lights : These are Solar All-in-one lights which means LED s , Solar Panel , Lithium (LFP) battery , Charge controller , BMS ( Battery Management System) , PIR (Motion Sensor) are inbuilt in one single unit Ranges available from 15 watt to 100 watt Solar Semi Integrated lights : These are Solar Street lights on which Solar Panels are mounted separately on top of pole with help of mounting frame and remaining components like LED s , Lithium (LFP) batteries , Charge Controller , BMS ( Battery Management System) are kept in one single unit . Ranges available from 15 watt to 60 watt Description / Features : No External power supply from DG set / EB line is required to run these lights they are completely self powered Comes with 5 years complete warranty including battery pack They come with back up of 18-20 hours a day and designed to operate in all climatic conditions with minimum back up time of 14-15 hours a day. No External cables required cable cost will be completely saved Saves Fuel cost / Energy cost these assemblies generally gets breakeven in less than 2 years Auto Dusk to Dawn Operation is programmed Auto On-Off of lights sensing ambient light Equipped with highly efficient LiFePo4 Lithium batteries and they has cycle life of 5000 cycles Highly efficient and tier 1 grade MONO PERC Solar Modules are used PIR (motion) sensor can be equipped as per requirement and they sense motion from distance of 10 meters. Completely safe to use at construction sites since no cabling and cable routing are required and they are complete DC systems . Warranty : All components of Solar Street Lights comes with 5 years complete warranty including that of battery pack Applications : Stock Yards / Storage Yards Site Offices Corporate Offices Residential projects , Layouts Gardens , Parks Shopping malls Parking Toll Plazas Highway Lighting Streets Lighting Re-walls construction sites Bridges Structural Construction sites
Main matter in this product page: We Manufacture , Supply , Install highly efficient Solar Street Lights of two categories : Solar Integrated / Solar All in-one Street Lights : These are Solar All-in-one lights which means LED s , Solar Panel , Lithium (LFP) battery , Charge controller , BMS ( Battery Management System) , PIR (Motion Sensor) are inbuilt in one single unit Ranges available from 15 watt to 100 watt Solar Semi Integrated lights : These are Solar Street lights on which Solar Panels are mounted separately on top of pole with help of mounting frame and remaining components like LED s , Lithium (LFP) batteries , Charge Controller , BMS ( Battery Management System) are kept in one single unit . Ranges available from 15 watt to 60 watt Description / Features : No External power supply from DG set / EB line is required to run these lights they are completely self powered Comes with 5 years complete warranty including battery pack They come with back up of 18-20 hours a day and designed to operate in all climatic conditions with minimum back up time of 14-15 hours a day. No External cables required cable cost will be completely saved Saves Fuel cost / Energy cost these assemblies generally gets breakeven in less than 2 years Auto Dusk to Dawn Operation is programmed Auto On-Off of lights sensing ambient light Equipped with highly efficient LiFePo4 Lithium batteries and they has cycle life of 5000 cycles Highly efficient and tier 1 grade MONO PERC Solar Modules are used PIR (motion) sensor can be equipped as per requirement and they sense motion from distance of 10 meters. Completely safe to use at construction sites since no cabling and cable routing are required and they are complete DC systems . Warranty : All components of Solar Street Lights comes with 5 years complete warranty including that of battery pack Applications : Stock Yards / Storage Yards Site Offices Corporate Offices Residential projects , Layouts Gardens , Parks Shopping malls Parking Toll Plazas Highway Lighting Streets Lighting Re-walls construction sites Bridges Structural Construction sites
Runthrough Ns Extra Floppy Tw-as418xa Runthrough Ns Floppy Tw-as418fa Runthrough Ns Hypercoat Tw-ds418fh Runthrough Ns Intermediate Tw-ds418ia
Materials: carbon steel and stainless steel (302,304,304L,316,316L etc). Characteristics:The welded stainless steel water well screen is made up of rods and warp. The rod can be round wire, triangular wire or trapezoid wire. The warp is triangular wire (V-shaped wire). Water well screens have a structure and high open area, as well as accurate slot dimension. At the same time, water well screen have heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Uses: The strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters. Continuous slots significantly increase discharge area,thus providing greater access to water-bearing zone . We can produce this pipe with diameter 80mm-550mm ,slot size 0.1mm-10mm,length 50mm-5850mm .
Application Use for control and connecting cable on data transmission within building management system, speaker audio system and control measurement. Suitable for use in dry and damp environment. Cable Structure & Features Conductor Material : Tinned copper stranded Insulation : Semi-Rigid PVC Drain Wire : Tinned copper stranded Shielding : Aluminium foil laminated screen Outer Sheath ; PVC Sheath Colour : black or gray Technical Data Standard : UL Style 2464 Approvals : UL apporoved Rated Voltage : 300V Testing Voltage : 1500V Flame Retardant : VW-1 Insulation Resistance : Min 20Mx km Min. Bending Radius : 10 x cable diameter Operating Temp. : -30C / +80C
Flat Cable M&P is able to support a full line of flat cable and flat ribbon cable for electronic applications. Providing both power and data transmissions, flat cables are mainly used for internal connections within the equipment. They are available in a wide range of configurations to accommodate different connection and data transmission requirements and the range of sizes of the equipment using the cables. Flat cables provide consistent performance due to their layout and the spacing between the cables and are lighter, thinner and more flexible than other cables. Features of Our Flat Cables & Wire * Flat, ribbon and twisted configurations, with different levels of flexibility. * Shielded or jacketed cable to reduce signal interference. * Range of pitches and pin configurations to accommodate the application requirements. * Easy to fasten with clamps, adhesive, and tape. We provide custom services, including marking, kitting and custom cable design to provide you with a custom solution for your cabling application. Contact us to find out more about Flat Cables and Wires.
Floating cable which can be applied to underwater robot equipment, either in fresh water environment or in seawater environment. It is widely used in marine exploration robot, underwater ROV UAV remote control submersible, underwater camera, underwater construction, underwater search and rescue robot, pipeline detection robot, submersible pump and the link between various underwater electrical equipment and shore based equipment; Link of signal transmission, power supply and equipment control system from underwater to water.
