Multi-purpose Spray Paint designed for interior & exterior application. High Gloss and Quick Drying Weatherproof, waterproof, rust proof Acrylic Paint Solid color and metallic color available Primer and Lacquer OEM Private Label acceptable 400ML Capactiy Standard packing: 12pcs/box
Advantage: 1.Cheap alternative. 2.Wash resistant. 3.Sustainable. 4.Protection against dirt. 5.Removable. 6.Dry time: < 5 minute. 7.Spray rate: > 98%. Suitable Range: It can be easily applied by spraying on most of surfaces, such as metal, alloy, plastic, acrylic, woods, glass, and so on.
Excellent weather resistance; Excellent light retention and color retention. Good chemical resistance and water resistance; With appropriate primer, good adhesion; Fast drying, good leveling, strong covering power; Wide range of application, good matching, can be matched with a variety of primers and used for a variety of material surface.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features Fast drying Colorful and easy to use Full paint film and high gloss Application Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions. Usage 1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed; 2.First spray on a small area of the test panel to confirm the accuracy of the selected color; 3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; 4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again. 5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking. Finishing work: 1.After spraying, the sample should be placed in a clean and ventilated environment for about 12 hours; 2.If not sprayed, the remaining material must be stored at room temperature and protected from light.
FEATURES This product adapted lead free water-based environmental formula,Contain efficient formaldehyde remover factor.Not only can remove formaldehyde for a long time,eliminate peculiar smell,but also have antibacterial effect. conforms to the RoHS test.Suitable for indoor and outdoor spraying.It will not fade after drying.Mild odor,no strong organic solvent pungent odor. APPLHCATION It is widely use for various materials, such as foamed styrene, plastic (acrylic acid, polycarbonate, hard vinyl chloride, ABS, styrene), metal, wood,brick, paper, glass, asbestos tile and so on. DIRECTION 1.It will not corrode the substrate when spray on the foam styrene,oil-based paint and other materials,can be applied to a wide range.2.Spray delicate,not easy to flow,good spraying effect.3.It can be wiped to clean before dry,band it is resistant well to water and weathering after drying..4 It is a high-grade environmentally friendly self-painting paint that meets the European Union's RoHS heavy metal content.5.Effective removal of formaldehyde,at the same time have a certain antibacterial,deodorizing effect. USAGE 1.Shake the can fully before using,shake for about 30 seconds more after hearing the voice of glass beads.Also need constantly shake during spraying. 2.Clean the dust,oil stains,rust,mildew before spraying. 3.Keep 30cm from the spraying surface to the nozzle when spray. 4.Keep parallel moving with the sprayed surface and do not spray too thick each time,and spraying thinner and thinner,spraying 2-3 times. 5.It should be dried before spraying the second time,usually in summer need 0.5 hour to dry( 1 hour in winter). 6.When spraying in strong water absorption wood products,should paint water-based varnish in advance or other primer to prevent excessive adsorption of the paint; 7.spraying times:Standard spraying for 2 times.
Spray Paints
Item No S7SP400ML-68 Color light black Product Name Spray paint Product Name Spray paint Content 400ML MOQ 360000pcs Warranty 3years Port Hongkong
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features High-gloss bright zinc Color consistent with galvanized parts Good atomization, easy to use Application It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts. Instructions: Before use, you must shake up, down, left, and right, and continue to shake the can for about 1 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even. 15 ~ 30cm away from the surface of the object to be sprayed, press the nozzle with the index finger to spray uniformly back and forth. When a small amount of remaining liquid cannot be sprayed, please rotate the nozzle 180 �° and spray again. If spraying is not finished one time, put the can upside down before storage, press the nozzle for about three seconds, and clean the nozzle to prevent plugging.
