*Wide color spectrum and natural finish; *Good color fastness,retain color intensity after multiple washing and scratch; *Good fluency,extensive range of digital printing machines; *Soft feeling,gentle to skin,environmental friendly; *Compliance with OEKO-TEX100 standard.
Chromoink delivers Digital Textile Ink-Sublimation Fluorescent Inkjet Ink,which is compatible with Mimaki, Epson, Roland, Mutoh and other printers using Piezo print heads. It is mainly suitable for materials of fabrics (PE, Nylon, fiber, Silk, wool, etc.), glass, acrylic, metal, wood, ceramics�¢?�¦etc. Feautres Fluorescent Magenta & Yellow. Bright color and fluorescent effects under black lights. Excellent water-resistance. No hazardous component. Colors Cyan / Fluorescent Magenta / Fluorescent Yellow / Black Package 1L / 5L / 20L 220ml / 440ml Ink Bag
Seriflex wide range of products :- 1). Standard series semi transluscent. 2). Opaque series opacity to extent. 3). High opaque series, performing higher opacity for darks. 4). High stretch series for transfer producing. 5). Process cmyk for soft finish photo wet on wet. 6). Process bryk for deeper photo effect. 7). Process cmyk litho inks (pvc free) wet on wet. 8). Process highlight white: - print onto the specially cutout highlight needed in multicolor effect. 9). Backup white litho : - applying backup opaque litho white adhesive onto the pre-printed offset transfer multicolor sheet excellent opacity bond stretch and transferability. 10). Backup printable adh : - a) for more extra stretch on the backup white. B) apply on the pre-printed offset sheet and transfer on White t-shirt. No need for white when you are Transferring the image on white t-shirt C) good stretchability and wash fastness. 1-5-30 kgs cans
All type of Fabric Printing Inks. The ink is solvent based, Can print All type lf Textile Garments Like Textiles Fabric, 100% Polyester Cloth, Nylon Fabric Like Nylon Tafetta and 100% COTTON cloths using Letterflex Machines or Flexography Machine.
Printing Parameters Squeege:  60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up:  Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:  60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege 60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:  60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up:  Water Strokes:  3 Rounds  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
