HIGH QUALITY KING PIN, SIZE 2INCH AND 2.5INCH
A bush is a mechanical fixing between two, possibly moving, parts, or a strengthened fixing point where one mechanical assembly is attached to another. In a car or other vehicle's suspension, bushes are used to connect the various moving arms and pivot points to the chassis and other parts of the suspension. We have an manufactuiring unit so all sizes of bushes are machined and supplied by us.
For high efficiency, we use cold drawn seamless precision steel tubes (EN10305-1) made by TENARIS-ITALY Max. Pressure 190 Bar Special order is acceptable. We guarantee the replacement of defective parts at no cost up to 12 month after delivery.
Supplier: Trailer axle, bogie, mechanical suspension, air suspension, landing gear, king pin, brake chamber and other spare parts
Supplier: Single acting, double acting hydraulic telescopic cylinders, semi-trailer axles, air suspension, mechanical suspension, bogie axles
Wondee Autoparts, as a one-stop supplier, provides a variety of landing gears: Loading capacity including 24ton, 25ton, 28ton, 30ton, 32ton, etc.; Series including Fuwa type landing gears; Jost type landing gears; Holland type landing gears; Inside landing gears and trailer jacks. At same time landing gear parts such as T-foot, S-foot, A-foot, R-foot, , gear bars, L-plates, W-plates and other parts are available. Besides, full set of parts for OEM are also available.
Many kinds of connectors of cooper are supllied in our company. Copper cable lugs are made of high conductive copper tube. The products are suitable for the connection of copper conductors (section 1.5mm2-1000mm2) in power cable with equipment. They are fully annealed to ensure qualities of electrical and mechanical strength. These are widely used in electricity boards and electrical industries. Main products Terminal connector(copper-aluminium connecting terminal\lug & tube, bimetallic lug, copper cable lug, etc.). Suspension clamps, aluminium alloy clamp, strain clamp, Link fitting(cross keyboard, yoke plate shackle, adjusting links.Ect.) Splicing fitting(cu-al specific form parallel-groove clamp) Splicing sleeves, performed repair tape, dampers, spacer for double conductor.Ect.
The magneto-strictive level gauge is mainly used for continuous measurement of liquid level and liquid interface. Applications include: petroleum, chemical raw material storage, industrial processes, biochemistry, pharmaceuticals, food and beverage, tank management and gas station underground inventory, liquid level industrial metering and control, ship (dock), dam water level, reservoir water level monitoring and sewage treatment. When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide wire that will generate a pulsed electromagnetic field around the waveguide wire as it propagates along the waveguide wire. A float is arranged outside the sensor probe, and the float can move up and down along the probe as the liquid level changes. There is a set of permanent magnetic rings inside the float. When the pulsed current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position where the float is located,this pulse is transmitted back along the waveguide wire at a fixed speed and detected by the detection mechanism. By measuring the time difference between the pulse current and the torsional wave, the position of the float, that is, the position of the liquid surface, can be accurately determined. Product features 1)Contact measurement 2)High precision, high stability, high reliability Long service life 4)Multiple signal output options 5)Reverse polarity protection 6)Lightning protection, anti-radio frequency interference 7)Compact structure and strong environmental adaptability 8)No need for periodic calibration and maintenance 9)Measure liquid level of tank with or without pressure 10)Isolated explosion-proof type (optional) 11)Easy installation Technical parameter: Output formï¼? 4ï½?20mAã??0ï½?5Vã??0ï½?10Vã??±5Vã??±10Vã??RS-485( varies from model to model) Linear errorï¼? superior to ±0.05%FSï¼?Sensors with a range of less than 300 mm has an error of less than 150 μm Repeaditityï¼? Superior to ±0.002%FS Output temperature driftï¼? 50ppm/ Product power consumptionï¼? â?¤50mA Output rippleï¼? â?¤20mV Load capacityï¼?4ï½?20mA outputï¼? Load capacityâ?¤500Ω ï¼? 0ï½?5Vï¼?0ï½?10V outputï¼?Controller loadâ?¥5KΩ Measuring probe materialï¼? 0Cr18Ni9Tiã??1Cr18Ni9Ti Electronic warehouse casing materialï¼?1Cr18Ni9Ti or aluminium die casting Lead wire wayï¼? a.Shielded cable connection, default length 2m (can be customized according to user requirements) b.Aviation plug connection c.Terminal block connection Explosion typeï¼? ExiaIIBT4ã??ExdIICT5(Depending on the model) IP gradeï¼?IP65 Installationï¼?thread mountingã??flange mountingã??Positioning ring installationã??Suspension installation or user-specific customization (depending on model)
Models: GE140ES GE140ES-2RS GE140DO-2RS ID: 140 mm OD: 210 mm Width: 90 / 70 mm Weight: 11 kg Brand: FGB FGB Bearing Manufacturing Co., Ltd. mainly produces Spherical plain bearing (Joint ball bearing), self-lubricating plain bearings, rod end bearings, extra-large joint bearings and tapered roller bearings, using high-quality bearing steel (52100 / 100Cr6 / GCr15), standard production process, to provide customers with quality products. The bearings produced by FGB Company have the characteristics of wear resistance, high speed and long life, and all dimensions meet the standards of ISO and GB. Mainly used in loaders (loading mechanism section bearings), excavators, hydraulic cylinders, cylinder earrings, water conservancy projects, automotive suspension systems / automotive shock absorbers, automatic production lines, mask machines, robots and other environments.
