NEO ENAMEL Paints are based on the alkyds/drying oils which have hard films with gloss retention. The films show excellent brushing properties and very little tendency to yellowing on exposure to the environment. Products are carefully designed keeping the pigment volume concentration to get optimum gloss, washability, adhesion and durability. The product dries at room temperature by oxidation and polymerization. NeoSyntheic Enamels are used on various substrates like wood , metal furnitures, train coaches, automobiles industries etc. NEO ENAMEL products are available in 2 varieties : I GLOW Hi Gloss Enamel. X 2 General Purpose Enamel.
Supplier: Emulsions, enamels, water based interior and exterior coatings. Epoxy, polyurethane, textured paints, universal tinters, nc paints for wood and metals and powder coatings, water based decorative paints, emulsions Enamel (oil based paints) , wood glue
PRODUCT INFORMATION PRODUCT NAMEâ?¡ Sequoia 3000 Gloss Finish DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel paint. It is easy to apply and forms a smooth, tough paint film which has excellent gloss, fungus resistance and durability. USAGE For decoration and protection. Suitable for all types of interior and exterior metal and wood surfaces BENEFITS High gloss and excellent gloss retention Excellent gloss fastness Excellent durability Washable PACK SIZE 1 litre, 5 litres COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart PERFORMANCE GUIDE CHEMICAL RESISTANCE Resistant to mild chemical fumes. Special paint systems required if surface is subject to constant chemical attack HEAT RESISTANCE Generally resistant to heat up to 0c. Discolouration will occur after a prolong time if surface is constantly heated WATER RESISTANCE Resistant to normal atmospheric humidity present. Will withstand repeated washing. Not suitable for surface immerse in water THEORETICAL COVERAGE 16-18 meter2 /liter. Note: Surface coverage will alter depending on condition of surface to be paint PRE-APPLICATION SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. RECOMMENDED PAINT SYSTEM Types of Surface Undercoat (1 coat) Finish (2 coats) Wood REDWOOD white undercoat Metal SEQUOIA PROTECTIVE COATING OR NASA oxide SEQUOIA 3000 GLOSS PAINT PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint. DRYTIME Touch dry : 2 hours Hard dry/Recoat : 8 hours CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal. PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment. Blinder : Organic Alkyd Solvent : White spirit
Product Description Nolifrit Ground Coat Porcelain Enamel Frit Features: 1, With very good adhesion, can dissolve much iron oxide in metal surface, makes very strong combination with metal body. 2, Can be combined with cover coat in high level. 3, With very good elasticity and compressive strength. Prevent and decrease damage due to mechanical stress. 4, With less viscosity and surface tension, its good for escape of gas when firing. Reduce bubbles on cover coat. To ensure the smooth surface of enamel products. 5, With suitable expansion coefficient similar as steel plate. ABOUT US vitreous enamel coating porcelain enamel steel grates enamel glaze fritHunan Noli Enamel Co., Ltd is the leader manufacturer of enamel frits & inorganic pigment in China. Now we have 30,000 M/T enamel frits and 2,000 M/T inorganic pigments annual capacity, 10,000 M/T RTU(Ready to use) powder and electro static powder. Our main products of enamel frits including ground coat, cover coat, transparent frit , matt enamel, direct on black frits and various cast-iron frits. High temperature inorganic pigment including Red& yellow, blue, green, black Oxide etc, widely used in porcelain enamel, ceramics, glass, coating,painting etc. As an ISO9001:2008 certified manufacturer, we have strict quality control in the whole production process to guarantee the quality of products. We are supplying the best service for customer. 100% of Our goods are exporting to USA, Europe, Middle East, Southeast Asia, South America, & Africa. FAQ Q1. Are you factory or trading company ? We are a factory. Q2. Whats the MOQ ? Inorganic pigment MOQ is 25kg, enamel frit, RTU powder and electronic static powder MOQ=200kg. Q3. What is your principle for the samples ? We offer free samples if you are willing to pay the shipping cost. Q5. How about your delivery time? A: Generally, it will take 15 days after receiving your advance payment. Q6. What information should I let you know if I want to get a quotation? A: Your base material, your application area (best to send your finished product picture), the physical parameters you require(acid resistance, adherence, color, etc) the quantity you need. If possible, you can send me your samples and we customize for you. Q7.Why choose us? 1. Reaching a production capacity of 30,000 Tons/Year for Enamel frit, 10,000 Tons/Year for RTU & electronic static powder, 2,000 Tons/Year for Inorganic pigment. 2. 60% frits & pigment exported to US, Netherlands, Indonesia,Thiland, Vietanam, Korea, Chile etc 30 country. 3. Having over 30 technical experts of frits & pigment from domestic & overseas, focusing on technical development & product improvement. 4. Having complete quality control system, Strong technical supporting team is focusing on customer service in this world.
Supplier: Automotive coatings, body filer primer nc paint acrylic varnish, wood coatings, wood sealer wood stain nc surfacer wood varnish, solvents, nc thinner acrylic thinner industrial solvents
Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.
>=100 Gallons US$11.50 Shipping: Support Sea freight Payments:This supplier also supports L/C,T/T,Western Union payments. Place of Origin: United Arab Emirates Usage: Building Coating, Wall Coating State: LIQUID Model Number: High gloss enamel alkyd Main Raw Material: ALKYD Application Method: Brush Brand Name: High gloss enamel alkyd BULK AND RETAIL: ALL COLOR Port Jebel Ali Lead Time : As per your requirements Main Raw Material ALKYD Application Method Brush State LIQUID Packaging & Shipping We ship 20 feet containers. It will accommodate 1 US gallon x 4000 CANS 5 US gallon x 950 buckets 1000 liters x 18 Totes Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
Metal Paint (oil-gloss-enamel)
1. Excellent weather resistance 2. Excellent antirust performance, good flexibility and film 3. Fast dry, good adhesion, eco-friendly
