The plate and tube dual-purpose fiber laser cutting machine can not only cut the plate, but also cut the profile (including square tube, round tube, channel steel, angle steel, etc.), and the carbon steel and stainless steel can be cut.  multi-purpose machine, with high-cost performance. The bed adopts a cast iron bed, gear rack drive system, and professional pipe cutting CNC system with high precision, full function, convenient use, and simple operation. The plate and tube dual-purpose fiber laser cutting machine are suitable for comprehensive processing and manufacturing enterprises.
Laser engraving system Working area: 914.4x609.6mm Laser power: 25, 60, 100watt Applications: 2d architecture model, large format engraving jobs. Advantage: economic type, Lem series laser engraving system Working area: 660.4x304.8mm Laser power: 25watt Applications: heavy-duty jobs, rubber stamps Advantages: super strength air flow for the clean engraving environment. Lee - 200kg Lem - 150kg
Co2 laser cutting machine D3040, 50kg, 1cubic meter
Specifications: Control system: dsp control system Laser type: sealed co2 glass laser tube Working area: 600*400mm(23.62*15.75inch) Work platform: honeycomb platform Laser power: 50w Pass-thru doors: allow to cut extremely long materials(max thickness 40mm) Interface: usb connection ( work in windows xp, 2000, vista, 7) Memory: 64mb buffer memory Driver system: stepper motor Auxiliary equipments: exhaust-fan, air-exhaust pipe Laser tube life hours: 6000hours Repeating precision: ±0.05mm Moving system: cnc controlling units Cooling mode: water-cooling and protection system Max speed: 600mm/s Working voltage: ac110/220±10% 50/60hz Whole power:
ModelDN-20 Fiber laser marking machine Laser wavelength1064nm Laser typeFiber Laser power20W Acousto-optic modulation frequency20Hz-200kHz Max. scanning precision8000mm/s Repeatable accuracy0.001mm Min. letter0.2mm Min line width0.01mm Marking area220 * 220mm Soft wareEnglish EZCAD ,easy to operate Cooling systemAir cooling Working Temperature0,-35, Working humidity0-90%, with no condensation Power supply220V/50HZ (Optional 110V/60HZ) Applicable Industries , Auto parts: pistons, piston rings, gears, shafts, bearings, clutches and lights; , Electronic components: resistors, capacitors, chips, printed circuit boards and keyboards; , Basic mechanical components: bearings, gears, standard parts and motors; , Instruments: panels, signs and precision instruments; , Hardware tools: knives, tools and measuring tools; , Daily necessities: crafts, zippers, leather clothing and sanitary ware.
Model,DN-20 Fiber laser marking machine Laser wavelength,1064nm Laser type,Fiber Laser power,20W Acousto-optic modulation frequency,20Hz-200kHz Max. scanning precision,8000mm/s Repeatable accuracy,0.001mm Min. letter,0.2mm Min line width,0.01mm Marking area,220 * 220mm Soft ware,English EZCAD ,easy to operate Cooling system,Air cooling Working Temperature,0-35 Working humidity,0-90%, with no condensation Power supply,220V/50HZ (Optional 110V/60HZ)
Product introduction Max. Cutting speed 0-30m/min(depending on the material and thickness) Ntrol box, high-resolute device, mechanical equipment, electrical equipment, lighting, posters, auto parts, display equipment, hardware and metal processing. Complete vacuum sealed inside, plywood packaging
Product introduction Fiber laser cutting machine is equipped with the most advanced international imported fiber laser source which generates powerful laser focused on objects to cause instant melting and evaporation. Automatic cutting is controlled Achine application • Applicable to fast cutting on plate or tube in metal, mainly for cutting on ss, carbon steel, manganese steel, galvanized plate, alloy plate, rare metal. • Widely used in kitchen appliance, electric control box, high-resolute device, mechanical equipment, electrical equipment, lighting, posters, auto parts, display equipment, hardware and metal processing. Completely vacuum sealed inside, plywood packaging
Description- Laser cutting after they were introduced in the 19th century, the fashion designers are widely adopting laser cutting in garment manufacturing. In synthetic fabrics, laser cutting produces well-finished edges as the laser melts and fuses the edge, which avoids the problem of fraying produced by conventional knife cutters. Furthermore, use of laser cutting is increasingly used for leather due to the precision of cut components. In fashion accessories such as jewellery, laser cutting can be used to produce new and unusual designs to produce a fusion of apparel design and jewellery style. In laser cutting a laser is used to cut the fabric into the desired pattern shapes. A very fine laser is focused on to the fabric surface, which increases the temperature substantially and cutting takes place due to vaporization. Normally gas lasers (CO2) are used for cutting of fabric. The cutting machine includes a source of laser, a cutting head fitted with mirrors to reflect the laser beam to the cutting line, a computer to control the entire system and a suitable mean for removing the cut parts. The application of inert gases (N2, He) during cutting prevents the charring and removes debris and smoke from the cutting area. Like the mechanical cutting devices, a laser beam does not become blunt and need sharpening. Automatic single ply laser cutters are faster (30 40 m/min) than automatic multiple ply knife cutters (5 12 m/min). However, while cutting multiple plies, knife cutters are faster per garment cut and also cheaper. The limitation of laser cutting is the number of lays of the fabric that can be cut by the beam. Best result is obtained while cutting single or a few lays, but the accuracy and precision is not obtained with several plies. Technical Specifications- Model AccuCut â?? XXXX Laser type CO2 DC glass tube / RF metal laser tube Laser power Glass tube 60 W/ 80 W/ 100 W/ 130 W / 150 W Metal tube 40 W/ 60 W/ 80 W/ 100 W/ 200 W Wavelength 10.6m Supply voltage AC 230 V ± 10% Reposition accuracy 0.1 mm (MAX) Cutting speed 0-30000 mm/min Engraving speed 0-64000 mm/min Cooling Water cooled Work environment Temp: 0 C 45 C Humidity: 5% 95% Acceleration speed 1 G Graphic file support .plt, .cdr, .al, .dwg, .dst, .dxf, .bmp, .jpeg, .tiff, .gif, .pcx etc.
Description- A mirror galvanometer is used to scan the laser beam and mark the product surface. Moving the focus lens (used instead of the f lens) back and forth enables adjusting the beam not only on the x and y axes, but also on the z axis. 3D Software Extension Ideal for the three-dimensional reproduction of designs and engravings with major detail, requiring different levels of engraving depth. This software extension, optionally provided, is based on the management of STL files, allows the 3D reproduction of solids authentic to their real proportions. 3 Axis Auto-Movement Axis position management through software, allowing the serial marking of multiple objects on the same tray and at the same time, even having different shapes and sizes. Based on the management of Cartesian coordinates, the use of this module, makes possible to program the movement of all axes depending on the position of the objects to be LASER-marked, making possible to boost productivity by the serial marking. Features- Hi-tech technology Permanent, high quality marks High efficiency and low operation cost Good accessibility, even to irregular surface Non-contact marking and no special working environmental needed The minimized metallurgical and mechanical damage Easy to automate and integrate (direct writing of patterns can established Using computer-controlled movement of the beam or sample) Precise beam positioning and a beam highly localized energy Transfer to the work piece High reproducible and high speed, effective Minimal heat load Contamination free Technical Specifications- Model SIL Accuwrite F 3D 50/60/100 Watts Power 20 W to 100 W Wavelength 1063 ±3 nm Beam quality
