Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Supplier: 1) composite rebar (gfrp) d 4 32mm
2) composite mesh (gfrp) d 2 4mm (50*50, 100*100, 150*150 and 200*200)
3) glass fiber for concrete
4) gfrp bent elements
Services: Wholesale trade, customs clearance, delivery services.
Buyer: Fiberglass direct roving (e glass)
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Supplier: Frp corrugated sheets; frp flat panel; frp composite panel; frp pultrusion profile; frp grating; frp filament winding pipe; frp rebar; and gutter; wind and dust screen; hollow panel; chair; signage; cover sheet; louver; manhole cover etc.)
Glass fiber rebar or GFRP is a new kind of composite material which is used as reinforcement materials that combines with epoxy resin and curing agent then through pultrusion molding process. Products Feature: 1. High Corrosion Resistance:The base materials used by the bolt are durable materials, and they are molded through the composite process. The life span is up to 100 years. They can be used as permanent support materials; 2. High Tensile Strength:The load is approximately double that of a steel bar with the same diameter; 3. Low weight-The weight is only 1/4 that of a steel bar with the same diameter, therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time 5. Anti-static-It has no electrical conductivity, and no sparks will be produced when being cut, it's particularly suitable for high gas zones; 6. Non-flammable-It's non-flammable and has high thermal isolation; 7. Culpability-It avoids damages to cutter heads, and does not delay excavation 8. Save cost-Use this material as reinforcing bars for road and bridge, could reduce secondary repair cost. Material: 100% glass fiber and epoxy Surface: all thread Diameter: 3-40 mm Tensile strength: 780-1200Mpa Density: 1.9-2.1 g/cm3 E-Modulus: >45 gpa
High Strength BFRP Basalt Fiber Rebar Pultrusion Rebar Rods for Construction Engineering Diameter 3-40mm Basalt fiber reinforcement polymer (BFRP), also called Fiber Reinforce Plastic, is a new kind of composite material which basalt fiber comnbines with epoxy resin andcuring agent. BFRP Rebar is a kind of rustless electrical insulator, with non-magnetic, especially with great acid resistance and alkali resistance. It could develop the durability of construction. With light weight property, its density is about 1.9-2.1g/cm3, about 1/4 of steel. Technical Index of BFRP Rebar Diameter(mm) Ultimate Tensile Load (KN) Crosssection (mm2) Ultimate Tensile Strength (Mpa) E-modulus (Gpa) Ultimate Shear Strength (Mpa) Weight(g/m) 6 28 28 1000 >50 >150 56 8 51 50.3 1000 108 10 79 78.5 1000 166 12 113 113 1000 245 14 108 133 810 285 16 142 177 800 373 18 182 227 800 470 20 228 284 800 570 22 277 346 800 720 25 362 452 800 1050 Main Features of BFRP Rebar: Non magnetic, Electric insulation, High strength, High E-modulus, Coefficient of thermal expansion near with cement concrete. High resistance to corrosion, acid, alkali and salt. Application: Earthquake observing station, Metro station,bridge, Seaport pier protection engineering and construction, Non magnetic or magnetic concrete construction, Prestressed concrete highway, Anti-corrosion chemical industry, Chemical storage tank, Underground engineering, MRI(magnetic resonance imaging) facilities basis, Communication building, Electronic equipment factory, Fusion buildings, Concrete guide board of Maglev railway, Telecommunications transmission tower, Television stents and strengthen core of Optical fiber cable.
Rebar range 16-40mm, No limitations on the type, composition, or weldability of steel bars, it's widely used in bridge construction.
Rebar range 16-40mm, No limitations on the type, composition, or weldability of steel bars, it's widely used in bridge construction.
