I.a Enterprises

Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20

We offer a wide range of Soda Feldspar.

Potash Feldspar Lumps :- K2O - 10% + Na2O - 2% + Fe2O3 - 0.1% Al2O3 - 17% - 18% SiO2 - 65% - 70% Lumps Size - 1 cm to 20cm Packing - Loose

The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture. Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan. We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few. Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance. A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium (typically there will be 2-5% Na2O). It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware. Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity. The white potash is a distinctive mineral with more potassium content. Our feldspar mineral is of high purity grade, free from impurities and naturally sourced. Our skilled personnel use technology advanced machines to extract the supplied feldspar under their close supervision. This feldspar is utilized in variety of industries, including building, mining, chemical, and others. It is also ideal for making porcelain and earthenware.

The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture. Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan. We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few. Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance. A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium (typically there will be 2-5% Na2O). It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware. Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity. White soda feldspar has high sodium content. It is a common raw ingredient used in glass, ceramics, and to some extent in paint, plastics, and rubber as a filler and extender. The alumina from feldspar improves the hardness, durability, and chemical corrosion resistance of glass. Feldspar's alkalis (calcium oxide, potassium oxide, and sodium oxide) operate as a flux in ceramics, reducing the melting temperature of a mixture. We at Aryan Tiles have an enormous selection of both white potash and white soda feldspar minerals. We have a deep understanding of how our Feldspar minerals can be used in manufacturing our customersâ?? end-products and suit their particular industryâ??s needs. And, thus we have been able to supply to various industries and optimize our customersâ?? product manufacturing with our premium quality mineral

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00