LANSING DL32 series is typically a standard LED Obstruction light designed for marking any obstacle that may present hazards to aircraft navigation. It made of die-cast aluminum alloy housing with polycarbonate dome and complies with ICAO regulation, low intensity TYPE B. GPS or GPRS functions also available if required.
All in one type low-medium-high intensity light incorporates infrared that makes it completely night vision goggle compatible obstruction light. It is maintenance-free, complying ICAO and FAA international standarts. This light can be used for marking obstacles which pose a threat to aircraft, such as telecom towers, buildings, wind turbines, power transmission towers, airports and general aviation warning purposes. This light has two operations modes: flashing or steady burning. The operation modes arer adjustable by end user. On/Off is controlled by photocell automatically, and fault alarm outputting if any fails. It is ideal product for the users. Fields of applications: Airports Tall buildings / structures Chimneys Telecommunication towers Tower Cranes Transmission lines Radar Antenna Flag pole Wetra LIOL-B Low Intensity Single Light Datasheet
We are leading manufacturer of Low and Medium Intensity LED Aviation Obstruction Light.We have supplied more then 75,500 Aviation Lights in India and other countries. Our LED Aviation Light Product Range: 230VAC / 48V /24DC Single and Dual Dome Aviation Light Dual Power 48VDC and 230V AC Aviation Light Solar Aviation Light: Low Intensity and Medium Intensity Medium Intensity Aviation Light Our light is uniform along with horizontal unlike other vendor.As per ICAO guidelines the light must be uniform. We use glass dome and not plastic. People use plastic domes (written in brochures UV Stabilized Polycarbonate Dome). You can check light on any tower which is more than 6 months old; you will find that all the plastic domes would have become brown because of deterioration of plastic with time. The light intensity coming out of the light becomes very less due to plastic becoming opaque over the period of time. We use 108 LEDs in 12 parallel circuits. The LED parallel circuits are mounted along the horizontal. So if a single LED goes bad then there is slight deterioration in intensity in that direction but there is no darkness. In most of the lights available in the market the parallel circuits are mounted along the vertical so if one LED goes bad then there is darkness in that direction. Also no one uses so many parallel circuits. We also manufacture Solar Aviation Light with fully tested branded Battery, Solar Panel ext
Effective intensity 32.5cd Compliant with Faa l810, icao type b Emitting color Red Operation mode Steady burning Vertical divergence 10, ° Horizontal out-put 360, ° Light source Led Light lifespan >10000h Power Power supply Optional voltage:ac220v, ac120v, dc12v, dc24v, dc48v Supply frequency 50hz, 60hz Power consumption , ?¤3w Structure Overall size 136mm, 136mm, 220mm Installation size 3/4inches or 1 inch chassis install Lens Polycarbonate, uv stabilize, corrosion resistance Body Aviation aluminum alloy, die-casting Temperature range -40, , , 70, , Weight 1kg Waterproof Ip65
Power input: dc12v Power consumption:10w Flash frequency: 20-60 times/min Light intensity: 2000 cd (± 25%) Emitting color: red Light source: imported led Ingress protection: ip65 Lightning protection: 10 ka Weight: 9kg
Power input: AC220V Power consumption:5W; Flash frequency: steady buring Light intensity: 32cd Emitting color: Red Light source: imported LED Ingress protection: IP65 Lightning protection: 10 KA Weight: 1.5kg
Power input: dc12v Power consumption:?¤10w; Flash frequency: 20-60 times/min Light intensity: 2000cd (25%) Emitting color: red Light source: imported led Ingress protection: ip65 Lightning protection: 10 ka Weight: 17kg
Power input: AC220V Power consumption:30W; Flash frequency: 20-60 times/min Light intensity: 2000-20000 cd (± 25%) Emitting color: White Light source: Xenon tube Ingress protection: IP65 Lightning protection: 10 KA Weight: 2.2kg
DLT32D is solar powered obstruction light. Solar function makes it a self-contained and almost car-free light unit.The light system is composed of 3 parts: light, battery box and solar panel. When the light and solar panel connected to the battery box, the whole system can be mounted on a tower. Both vertical mounting and horizontal mounting are available. DLT32D is equipped with a 12Ah VRLA (volve regulated lead acid) rechargeable battery which could power the light up to 7 days when the weather is cloudy&rainy. The 12Ah VRLA battery is also easy to find almost anywhere.
The solar panel comes with TY80S provides power supply to the light, which makes TY80S a self-contained and care-free light unit. Also, with the solar function, the light is easy to deploy to almost any condition and any emergency case. Robust body built and surface coating provides good protection against hash environments. TY80S is equipped with an 12V12Ah Lithium rechargeable battery which could power the light up to 25 days when the weather is cloudy & rainy. Lithium battery is also a clean power source with no pollution. The Lithium battery is also easy to find almost anywhere. TY80S is also available with an optional on/off switch for storing and protect battery from over-discharging.