Deliver Power up to 328ft
High-speed data transfer of up to 200Mbps via electrical wiring
Enable data transmission through existing home power grid
Smart power saving technology for improved power efficiency
Provides a noise-filtered
Compliant with the HomePlug Powerline Alliance industry specifications
4 Ports 10/100Mbps Ethernet Switch (PL-204)
Utmost slim and light design
Ideal for residential users.
T-Bridge stands for "Telephone Line Communication", Which enables high speed data transmission through telephone cables. Besides Telephone cables, any types of copper cables such as coaxial cables, speaker cables, and UTP cables can be applied. T-bridge can save network construction cost dramatically as it can utilize existing copper cables already wired.
The safe decision. productnews The new communication modules enable the programming of the CPUs with ELOP II via Ethernet. These are used with the CPUs which are also new: F 8650X/F 8652X (safe CPU for H51q/H41q systems) F 8651X/F 8653X (non-safe CPU for H51q/H41q systems) The already existing communication modules F 8627 and F 8628 are still available in the product portfolio. Issue March 2006_Page 1/2 Applications/Accompanying products Part numbers/Delivery date F 8627X: 98 4862765 F 8628X: 98 4862865 Delivery date: immediately 2 new communication modules for H41q/H51q systems â?¢ F 8627X: Communication module for the protocols safeethernet and OPC DA via HIMA OPC server New: OPC A&E via HIMA OPC server, MODBUS-TCP slave and ELOP II programming via Ethernet (from ELOP II V. 4.1) Function Even more protocols! F8627X/F8628X Dimensions and weight â?¢ F 8628X: Communication module for the protocol Profibus DP slave New: ELOP II programming via Ethernet (from ELOP II V. 4.1) 19-inch module for H41q/H51q systems 3 height units (HU), 3 x 44.45 mm 4 width units (WU), 4 x 5.08 mm
Driver: mr-h ACN series ssc-net compatible AC same service rated output: 0.2KW
The same server controller can easily convert the operation module and Fieldbus module through the automation interface
At the same time, different fieldbus modules are used to realize different control modes (RS232, RS485, optical fiber, INTERBUS and PROFIBUS), while the control mode of general frequency converter is compared with single-mr-pwcns5.
The servo controller is directly connected to the resolver or encoder to form a closed-loop mr-pwcns5 for speed and displacement control, while the general frequency converter can only form an open-loop control system mr-pwcns5
The control indexes of servo controller (such as steady-state accuracy and dynamic performance) are better than general frequency converter. Optical fiber length: 0.5m. Sscneti application cable (standard optical fiber used in the control cabinet).
Connector for cn1a and cn1b, Shenji general AC servo amplifier melcervo-j3 series mr-pwcns5, rated output: 5.0kw.
Interface type: sscnet optical fiber communication type. Power specification: three-phase AC400V.
By using sscnet III high-speed serial communication with the fastest communication cycle of 0.44ms between the motion controller and the servo amplifier, a fully synchronous control system can be constructed.
Just insert the special optical fiber into the connector to form the sscnet network, which greatly reduces the wiring work and the possibility of miswiring.
Due to the use of optical fiber communication, the anti noise ability is greatly improved, and the original mr-pwcns5 can realize long-distance wiring up to 800m (the maximum 50m x16 axis between stations)
Provide servo amplifier mr-j3-b-rj006 meeting the full closed-loop control function. It is suitable for the optimization and adjustment of the same clothes of dry machinery
More advanced optimization adjustment function and control function to maximize the mechanical performance. Electric general AC servo amplifier melcervo - J3 series.
Rated output: 7.0kw original mr-pwcns5 interface type: sscnet optical fiber communication type. Special specification: full closed loop control type. Power specification: three phase ac200v. High precision and high response positioning control.
The full closed-loop control with high response can be realized through double feedback control,
The dual feedback control can be performed when switching between the servo motor encoder and the load side encoder. Mr-j3-b-rj006 can be used with linear encoders from many manufacturers.
Users can build the original mr-pwcns5 system according to their own accuracy requirements. The ABS linear encoder with serial interface can easily build an absolute position detection system without installing a battery on the servo amplifier.
Function
1, wirelesses receive and send email
2, wireless view internet
3, wireless data transport
4, move working and administrator
5, construct enterprise big customers move data and vpn appliance
Sound communication
6, chinese sms message receive and group send
7, use at command to control for long-distance
8talk or call urgently
9, the fastest, speed down row 230.4k, up row 84.6k
10, sound code method: 13k qcelp (is-733), 8k evrc (is-127)
11, message service (is-637-a): support english letter and chinese, supply edit message content:
Word and pdu
12, point to point
Work parameter
Item performance
1, model vc200
2, exterior size 69.5(l)*45(w)*12.4(h)
3, interface: express
4, wireless frequency: 800mhz transmit rf: 824 to 849mhz
Receive rf 869 to 894mhz
5, receiving sensitivity: -106dbm
6, storrage temperature: -30 to +70
7, operating temperature: -20 to +60
8, relative humidity: 5-85%rh
9, work voltage: 3.0v-3.6v
10, work current: send520ma (max)
Receive150ma (max)
Dormancy18ma (max)
11, support protocol: cdma2000 1*rtt, is707-a, fcc is-95a compatible
12, operating system: windows 2000/xp/vista
1, wirelesses receive and send email
2, wireless view internet
3, wireless data transport
4, move working and administrator
5, construct enterprise big customers move data and vpn appliance
Sound communication
6, chinese & english sms message receive and group send
7, use at command to control for long-distance
8, talk or call urgently
9, the fastest speed down row 230.4k, up row 84.6k
10, sound code method: 13k qcelp (is-733), 8k evrc (is-127)
11, message service (is-637-a):support english letter and chinese , supply edit message content :
Word and pdu
12, point to point
Work parameter
Item performance
1, model vd200
2, interface: usb
3, wireless frequency: 800mhz transmit rf: 824 to 849mhz
Receive rf 869 to 894mhz
4, receiving sensitivity: -106dbm
5, storrage temperature: -30 to +70
6, operating temperature: -20 to +60
7, relative humidity: 5-85%rh
8, work voltage: 3.0v-3.6v
9, work current: send520ma (max)
Receive150ma (max)
Dormancy18ma (max)
10, support protocol: cdma2000 1x*rtt, is707-a, fcc is-95a compatible
11, operating system: windows 2000/xp/vista
