Feature: -Max operating temp 80°C -Grade: N35 -Coating: Nickel -Ni -Directions of Magnetization :Top - North Pole / Bottom - South Pole and Thickness Magnetized. Nickel Coated Magnets have many industrial, educational and household uses .It is best to Nickel coated for long-term maximum energy output and usage. These Magnets are highly resistance against demagnetization.
Feature: -Max operating temp 80°C -Grade: N35 -Coating: Nickel -Ni -Directions of Magnetization :Top - North Pole / Bottom - South Pole and Thickness Magnetized. Nickel Coated Magnets have many industrial, educational and household uses. It is best to Nickel coated for long-term maximum energy output and usage. These Magnets are highly resistance against demagnetization.
Ferrite magnets are made of a composite of iron oxide and barium or strontium carbonate.These materials are readily available at a lower cost than other types of materials used in permanent magnets making it desirable due to the lower cost. Ceramic magnets have a good balance of magnetic strength, resistance to demagnetizing and economy. They are the most widely used magnets today.
Sphere Shaped Nickel Plated Magnets ; Size: OD 5mm :216 Pieces ; Features: Max operating temp : 80°C ; Grade: N35 ; Coating: Nickel -Ni; Directions of Magnetization :Top - North Pole / Bottom - South Pole and Thickness Magnetized. Nickel Coated Magnets have many industrial, educational and household uses.It is best to Nickel coated for long-term maximum energy output and usage. These Magnets are highly resistance against demagnetization.
Supplier: Neodymium magnets, rare earth magnets, bar magnet, ring magnet, ferrite magnet, ndfeb magnet, alnico magnet, disc magnet, smco magnets, rectangular magnet, n52 grade magnet, segment magnet, multi pole magnet, n35 grade magnet, y30 magnet, ferrite slab, n45 grade magnet, rare earth magnet ring, neodymium magnets bar, neodymium magnets block, rare earth magnets large, rare earth magnet bar, neodymium magnets strong, ferrite magnet ring, rare earth magnet disc, neodymium magnets arc, alnico magnet bar, rare earth magnet block, ferrite magnet blocks, large neodymium magnets, large rare earth magnets, strong neodymium magnets, super strong neodymium magnets, strong rare earth magnets, large ring magnet, ring neodymium magnets, wholesale neodymium magnets, super strong rare earth magnets, strong bar magnet, arc neodymium magnets, disc neodymium magnets, large bar magnet, custom made neodymium magnets, arc segment magnet
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging. Advantages of Sintered NdFeB Magnet : 1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature; 2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet; 3. High cost performance.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
