Function and service description of Seawater Desalination Plant -Raw water boosting and pre-treatment system -Online monitoring device of Reverse Osmosis -Automatic cleaning and fore & back flushing system with compressed air acceleration of sand filter. -Automatic low speed chemical cleaning and dosing system. - Spares and special tools with reference to maker's standard On-site commissioning and conduct available upon demand of customer in China - World-wide aft-sales service and maintenance upon request Performance system function of RO Seawater Desalination Plant 1) Sea water 35000ppm, for desalinating sea water into fresh water 500ppm 2) Whole system under control and monitoring via PLC 3) Automatic cleaning and back-flushing system equipped for sand filter, 4) There is over-pressure protection available for high pressure pump, when pressure is over 6.8Mpa, the system will shut down automatically, and give alarm for attention. 5) High pressure pump equipped with low-pressure protection device, when pre-treated sea water pressure is less than 0.05Mpa, the system will shut down automatically and give alarm for attention. 6) Working parameter (Raw water flow, product flow, brine flow, operation pressure, product water conductivity) 7) If the product water is unqualified (salt content more than 700ppm), the system will drain automatically and give alarm for attention. 8) Potential-free alarm and running indication available for extension. Technical parameter of RO Seawater Desalination Plant Product: 1m3/d-200m3/day Raw water: â?¤ 3000PPM~45000PPM Inlet temperature: 5~35° C PH value of Raw W: 3.0~10.0 Boosting inlet pressure: 0.1~1kg/cm2 (Positive) Salt content of product water: â?¤ 10~600PPM Desalination rate: â?¥ 98.5% Product water pressure: â?¤ 0.3Mpa Recovery: 36% Power supply: 380VAC/50Hz/3Ï? or as request Power consumption: 18.5KW(Include boost pump) Control cabinet: 220VAC Control voltage: 220VAC IP: IP55 Potential-free extension for running indication and common alarm available. Motor: IP: IP55 Insulation class: "F" Outline: LÃ? WÃ? H=2750Ã? 1950Ã? 2200mm Weight: Dry weight 2500kg
This small industrial Ro plant uses Quartz sand filters, activated carbon filter as a pre-class treatment, the effective removal of suspended solids in raw water, sediment particles , organic colloids, organic matter, odor, chlorine and other impurities, with pre-programmed as a reverse osmosis desalination plant to remove the raw water. Most of the dissolved salts, bacteria, hot stream and so on, to ensure finished water quality standards.
What is the industrial RO Plant An industrial RO (reverse osmosis) plant is a water treatment system that uses the process of reverse osmosis to remove impurities and contaminants from water. Reverse osmosis is a technology that uses a semipermeable membrane to separate dissolved solids and other impurities from water, producing pure water that is suitable for a variety of industrial applications. Industrial RO plants are used in a wide range of industries, including power generation, pharmaceuticals, food and beverage, chemical processing, and many others. They are typically used to purify water for use in manufacturing processes, as well as for drinking water and other applications.
Water Treatment Plant
An effluent treatment plant (ETP) is a facility designed to treat wastewater before it's released into the environment or reused. ETPs are crucial for managing wastewater from industries, sewage systems, or any source of liquid waste to prevent pollution and protect public health. Key Components of an ETP: Preliminary Treatment: This involves removing large solids and debris through screening and grit removal. Primary Treatment: Here, the wastewater is allowed to settle in large tanks, separating solids from liquids. The solids, known as sludge, are removed for further treatment. Secondary Treatment: This stage typically involves biological processes where microorganisms break down organic matter. Common methods include activated sludge systems and trickling filters. Tertiary Treatment: This advanced treatment focuses on removing remaining impurities, including nutrients like nitrogen and phosphorus. Techniques can include filtration, chemical treatment, or advanced oxidation. Disinfection: Before discharge or reuse, the treated water is disinfected to eliminate pathogens, often using chlorine, UV radiation, or ozone. Sludge Management: The sludge generated during treatment is further processed, which can involve digestion, dewatering, and sometimes incineration or landfilling.
Effluent Treatment Plant 50KL
Sewage Treatment Plant 100kl
we manufacturing domestic plant capacity 10 to 40 lph in various model. we used RO membrane, Ultra violate, alkalizenor with added mineral technology with tds correction system. also manufacturing and supply as customer requirement.
Waste Water Plant
WHY WATER TREATMENT IS REQUIRED ? Due to environment pollution water is becoming polluted day by day. Many people across the world facing difficulties in getting Pure Healthy water. Due to heavy industrialization across the world day by day ground water is also getting polluted and water treatment before using it is must. We have wide range of experience treating water since last 15 years and we will be happy to share our experience with you. Feel free to consult us before purchasing. TYPES OF WATER TREATMENT PLANTS Reverse osmosis Water Treatment Plant Ultra Violet Water Treatment Plant Ultra Filtration Water treatment Plant Demineralised Water treatment Plant (DM Plant) Effluent Treatment Plant. Sewage Treatment Plants.
