Material testing machines
Equipment summary: RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ±1% / the value ±0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:±0.5% / tolerance: ±0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
2.3 Technical parameters: Maximum test force: 50kg, 100kg, 200kg (choose any one) Force unit: Kgf bf N Test itinerary :1000mm without fixture Print Project: Print after saving data Test speed :0-500mm/min can be set Shutdown method: Automatic shutdown due to fracture control mode : PC control Power source :Stepper motor Transmission mode :Ball screw drive Host size: Approximately 500 * 500 * 1430mm; Display method :Computer full Chinese display (or English system) Testing items: Real time value, maximum value, fracture value, elongation, tear strength, proportion of fracture points, etc 2.1. Purpose: Test the tension, pressure, shearing, peeling, tearing and other tests of wires, leather, fabric, plastic and other products, and meet various tensile and pressure testing standards. 2.2 Characteristics: This machine is driven by a precision motor, ensuring smooth operation and low noise. The key components of this machine are all high-quality and reliable products, making your experiments precise and effective. This machine is fully computer-controlled and can save and print test data.
Model specifications: DL8501A Capacity selection: 500kg Force unit :N kgf lbf etc Displacement unit: mm cm Inch , etc Stress unit :Pa Kpa Mpa Gpa KN/ N/ , etc Power resolution: 1/500,000 accuracy: 0.5% Travel resolution: 1/500,000mm Sampling speed: 100Hz Effective travel: 1400mm (including fixtures) Speed setting range: 0.1-1000mm/min Arbitrary settings Speed accuracy : ±0.2% Test sample range: 160mm Shutdown method: Overload shutdown, emergency stop button, automatic shutdown for specimen damage, automatic shutdown for upper and lower limit settings motor: Step motor power: 0.6KW Host size (WxDxH): 550x380x1550mm machine weight: 130kg source :AC220V/50Hz 1.Main purpose The DL8501A microcomputer type material testing machine is specialized in testing the strength of various materials, finished products, and semi-finished products. Various fixtures and fixtures are selected, suitable for measuring the mechanical properties and related physical parameters of various materials in states such as tension, compression, bending, shear, tearing, peeling, and puncture. It can be used for stretching, compression, three-point bending, four-point bending, shearing, tearing, peeling, finished shoe piercing, cardboard box holding, foam cyclic compression, spring tension and compression, and various dynamic and static cyclic tests. This machine adopts Windows Chinese window program settings, which is easy to operate and automatically stores test data (load stroke curve, load attenuation life curve, test results), and all test conditions can be stored.
Supplier: Micro silica (silica fume), silica, fly ash, pozzolano, ggbfs and white cement, other cementatious materials and factory/plants specialized spare parts & equipments, automation & switchgear, drives & transmission spares, instrumentation & pump, pneumatic & hydraulic spares, valves & actuators, mechanical parts, high carbon ferro chrome, foundry pig iron, iron ore concentrate, chromite ore, antimony ore, silicon metal 441 (powder), ferro silicon (fesi), iron ore pellet, copper concentrate
At A.S Engineers & Fabricators, we utilize cutting-edge laser and CNC (Computer Numerical Control) machines to deliver precision engineering solutions for a wide range of applications. Our laser machines offer high-speed, high-precision cutting and engraving capabilities, allowing us to work with various materials, including metals, plastics, and composites. With laser technology, we can create intricate designs, precise cuts, and detailed engravings to meet the most demanding requirements. In addition to laser technology, our CNC machines provide advanced machining capabilities for turning, milling, drilling, and more. These automated machines ensure consistent and accurate production of complex parts and components, with fast turnaround times and minimal waste. Precision Laser and CNC machines offer high levels of precision, allowing for accurate cutting, engraving, and machining of intricate designs and complex shapes. Repeatability The automated nature of laser and CNC machining ensures consistent results, with the ability to replicate parts accurately across large production runs Versatility These machines can work with a wide range of materials, including metals, plastics, wood, and composites, making them versatile for various industries and applications Complexity These machines can create complex geometries and intricate patterns that would be difficult or impossible to achieve with traditional machining methods Speed Laser and CNC machines can produce parts and components quickly and efficiently, reducing production time and increasing productivity. Minimal Waste Laser and CNC machining produce minimal waste compared to traditional methods, as they optimize material usage and reduce the need for manual finishing
Application: For static and cuasi-static test (low frequency fatigue) for high loads in many types of tests. Specially indicated to switch test mode, thanks to its dual space design. Double test space frame: With high structural stiffness,4 columns and 2 screws with double testing space The upper space is intended for tensile tests, and the lower for compression, shear, bending, folding, etc. Manufactured according to Standards EN 10002-2; ASTM E4, ISO 7500-1; DIN 51221 and BS1610 guide. Mobile crossbar separates the two test zones and is positionable in height by means of two spindles driven by an integrated electric motor frame.
This series materials testing machine product group was primarily developed for standardized tests on ma- terials and components. Used in conjunction with the intuitive KStest software. Typical test applications for wide range of tension, compression, bending, shearing and low cycle test, include metal, rubber, plastic, spring, high strength steel (HSS), aerospace and automotive structures, screws, nuts, etc. Standards: ASTMA370, ASTME4, ASTME8, ASTME9, ISO6892, ISO7438, ISO7500-1, EN10002-4, GB/T228-2002, GB 16491-2008, HGT 3844-2008 QBT 11130-1991, GB13-22-1991, HGT 3849- 2008,GB6349-1986, GB/T 1040.2-2006, ASTM C165, EN826, EN1606, EN1607, EN12430 etc
Supplier: Material testing machine
1.Applications This cement mortar flexural and compressive strength testing machine is for determining the flexural and compressive strength of moulded mortar specimens. The flexural strength of mortar is determined by three point loading of hardened moulded mortar prism specimens to failure. The compressive strength of the mortar is determined on the two parts resulting from the flexural strength test. 2.Size of mortar for flexural strength test Cement prism specimen: 40x40x160mm 3.Brief introduction of cement flexural and compressive strength test procedure Cement flexural strength test 1)place the cement prism in the test machine with one side face on the supporting rollers and with its longitudinal axis normal to the supports. 2)select the apply rate and apply the load vertically by means of the loading roller to the opposite side face of the prism until fracture. 3)keep the prism halves damp until tested in compression Cement compressive strength test 1)center the prism halves laterally to the platens of the testing machine. 2)increase the load smoothly at a set rate over the entire load application until fracture.
