We also have interest in selling Bulk Ferro Alloys and especially Low/Medium Carbon Silico Manganese and we are already exporting these product/s. We have tied up with a manufacturer bin , Bhutan to sell their products. Products are:- Low Carbon Silico Manganese. Typical Specifications are: Mn: 55 % Minimum Si: 25-28% C: 0.2% Maximum P: 0.15% Maximum Size: 10-150 MM (90%) Medium Carbon Silico Manganese. Typical Specifications are: - Mn: 55%-60% Si: 22%-25% Max C: 0.5% Max Si: 0.05% Max P: 0.2%-0.40% Size: 10-150 MM (90%) For sure, we will be able to meet the requirements, once we get your reply
Supplier: Reactive dyes, reactive dyes intermediates, resist salt, disperse printing thickener for polyester, chemicals, textile chemicals, rubber chemicals, deg, meg, glycerine, pigments , textiles and ferro alloys
Services: Trading / commission agent in the field of dyes, chemicals and ferro alloys
Buyer: Chemicals, fabrics, chromite sand, chromite ore, ferro silicon
Supplier: Thermocouple, ferro alloys, chemicals, laboratory instruments
Buyer: Thermocouple disposable, all types ferro alloys, laboratory instruments, chemicals, immersion samplers
Supplier: Bauxite, magnesia, magnesite, fluorspar, ferro alloys, chemical, cryolite
Buyer: Bauxite, magnesia, magnesite, fluorspar, ferro alloys, chemical, cryolite
Supplier: Steel alloys, non ferrous metals, chemicals, machinery, power plants, universal joint shafts, gear spindle couplings, textile packaging machines
Services: Liaison representatives & service providers
Buyer: Steel alloys, non ferrous metals, industrial chemicals and machinery
We supply high-purity Zinc Alloy for industrial applications, ensuring exceptional quality and performance. Our material features a Zinc (Zn) content of 99.999%, with extremely low levels of impurities, making it suitable for critical uses across multiple industries. Chemical Composition (wt. %): Zinc (Zn): 99.999% Manganese (Mn): < 0.001% Silicon (Si): < 0.001% Iron (Fe): < 0.001% Copper (Cu): < 0.001% Chromium (Cr): < 0.001% Titanium (Ti): < 0.001% Aluminum (Al): < 0.001% Magnesium (Mg): < 0.001% Applications: This high-purity zinc alloy is ideal for: Electronics and semiconductors Galvanization processes Specialty coatings Advanced alloy manufacturing Research and development With our stringent quality controls and reliable delivery network, we ensure that your specific requirements are met with excellence. Contact us for further information or to request a quote.
Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments. The Incoloy825 has the following functions: Good resistance to stress corrosion cracking. Good resistance to pitting and crevice corrosion Good oxidation resistance and non oxidative thermal acidity. It has good mechanical properties at room temperature and high temperature up to 550 Certification of pressure vessels with manufacturing temperatures up to 450 C Incoloy 825 metallographic structure: Incoloy 825 alloy has a stable face centered cubic structure. Chemical composition and appropriate heat treatment ensure that the corrosion resistance will not be weakened by sensitization. Incoloy825 Corrosion resistance: Incoloy825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments. Incoloy825 is widely used in various industrial fields where the working temperature is no more than 550. Typical applications include: Heating pipes, containers, baskets and chains for sulfuric acid pickling plants. Seawater cooling heat exchanger, marine product pipeline system, acid gas environment pipeline. Heat exchanger, evaporator, washing, immersion tube, etc. In phosphoric acid production. Air heat exchanger in petroleum refining Food Engineering chemical process Flame retardant alloy for high-pressure oxygen Product name INCOLOY Alloy 825 Grade INCOLOY Alloy 825 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Grade Cu Ti AI P C Ni Cr Mo INCOLOY Alloy 825 2 0.8 0.1 - 0.02 42 21 3
The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase. The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance. The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion. Product name ALLOY 20 STAINLESS STEEL Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
High carbon ferro manganese : (mn:70%min, c:8%max, si:1.5%max, p:0.4%max, s:0.03%max) Medium carbon ferro manganese : (mn:70%min, c:1.5%max, si:1.5%max, p:0.4%max, s:0.03%max) Low carbon ferro manganese : (mn:70%min, c:0.1%max, si:1.5%max, p:0.4%max, s:0.03%max) High carbon ferro chrome: (cr.:60%min., c:7.75%max, s:0.038%max, p:0.05%max, si:4%max.) Medium carbon ferro chrome: (cr.:60%min., c:0.5%max, s:0.038%max, p:0.03%max, si:4%max.) Low carbon ferro chrome: (cr.:60%min., c:0.03%max, s:0.038%max, p:0.03%max, si:4%max.) Ferro silico magnesium : (mg:8%max, si:44%min, ca:1.5%max, ce:1.5%max.) Ferro silicon : (si:70%min, al-2%max, c-0.10%max., s:0.030%max., p:0.035%max.) Ferro silicon crushed : (si:75%min, al-2%max., c-1%max, size:2-6mm) Ferro silicon lumps: (si:75%min, al-2%max., c-0.15%max, size:20-100mm) Low carbon ferro molybdenum:(mo:60%min) Low carbon ferro vanadium:(va:50%min) Ferro boron :(bo:18%min).
