BARILAC barrier coatings are the most suited sustainable solution to replace polycoated laminated board, waxcoated, PVDC coated etc all non sustainable alternatives. Barilac barrier coat is recommended for paper cup, trays, foodtrays, pizza boxes, ice cream cartons etc. The special product features are. - Low COBB - Good oil and grease resistance - Good Moisture Vapour Transmission rate - Good heat sealing performance - Good water resistance - Low odour - FDA compliance
PC natural 100% pure pc without any coating MATERIAL: PC natural 100% pure pc without any coating CATEGORY: PC TYPE: Natural SPECIFICATION: Separate 25 kg bag and Mark per month 78 mt 100% pure pc without any coating ,post Industrial materials Origin: Bangladesh LOADING WEIGHT: 24 Ton FOB (USD/Ton): 1450$ - 1700$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days Our Commitment We are committed to delivering in accordance with the quality given, source and licensed in the field of scrap transportation. 2Lians always for the purpose of satisfying customers on the criteria of sustainability and fairness through high work efficiency
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.
one of the most trusted and dedicated manufacturers and suppliers of powder coating in . Powder coating protects the most rugged machinery as well as the household items you rely on every day. It offers a more durable finish than liquid paints. It is simple to apply and comes with the technical support of specialists. With 50+ Decades of being a trusted manufacturer, We are dedicated to promoting essential product quality at reasonable prices and cost-effective services of powder coating. Our primary motto is to focus on Customer needs.
Water Based Coatings - Primers, Gloss & High Scuff - High Gloss/High Slip - Duct Gloss & Matt - Specialty Coatings - Soft Feel / Satin / Neutral / Super Matt
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in: Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel) Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes Product is available in 20kg packing
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in: Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel) Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes Product is available in 20kg packing
