Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
OFFER ONLY FOR REAL AND DIRECT BUYERS. UPDATED PRICES ________ FOB ROTERDAM DIP & PAY TANK TO TANK JET A1 (JET FUEL ) Fob Rotterdam. Origin not sanctioned. Price 83$/Barrel. Min 2,000,000/Barrel. Max 10,000,000/Barrel monthly. Minimum contract 1 year. The price has a commission of $2/barrel. Seller side $1/barrel. Buyer side $1/barrel. ________ JP54 Fob Rotterdam. Origin not sanctioned. Price 83$/Barrel. Min 2,000,000/Barrel. Max 10,000,000/barrel monthly. Minimum contract 1 year. The price has a commission of $2/barrel. Seller side $1/barrel. Buyer side $1/barrel. ________ D6 (VIRGIN FUEL OIL ) Fob Rotterdam. Origin not sanctioned. Price 1.01 $/Gal. Min 200,000,000/Gal. Max 1,000,000,000/Gal monthly. Minimum contract 1 year. The price has a commission of $0.02/Gal. Seller side $0.01/Gal. Buyer side $0.01/Gal. ________ EN590 10PPM (ULTRA LOW SULFUR DIESEL ) Fob Rotterdam. Origin not sanctioned. Price 530$/MT. Min 100,000/MT. Max 500,000/MT monthly. â?¢ Minimum contract 1 year. The price has a commission of $10/MT. Seller side $5$/MT. Buyer side $5/MT. ________ DIP & PAY PROCEDURES CI SPOT FOB ROTTERDAM TANK TO TANK 1. The Buyer sends the ICPO to the Seller along with TSA (Tank Storage Agreement), to be approved by the refinery. 2. The Seller issues the PROFORMA INVOICE directly to the Buyer. Buyer signs and seals and returns to Seller. 3. Seller Issues, CONDITIONAL DTA letter that must be signed by all parties, including Buyer and Tank Farm. Buyer sends TSR (Tank Storage Receipt). After. 4. The Seller issues the POP Document to the Buyer: a. Unconditional authorization of immersion test b. SGS Report (No more than 72 hours) c. ATV (Authorization to Verify) d. Injection schedule e. Injection analysis report f. Supply commitment 5. The Seller issues a COMMERCIAL INVOICE to the Buyer, to be signed and returned to the Seller. Within 24-48 hours, Buyer makes 100% TT payment via MT103 and after payment is confirmed, starts injection of fuel into Buyer's tanks. 6. Seller issues ATSC (Authorization to Sell and Collect) and changes TITLE to Buyer. 7. Seller issues 12-month contract to be signed by all parties including NCNDA/IMFPA. NOTE: If you agree with our price and procedure, you must send the company profile to do DD due diligence. If everything is in order, the company data is sent so that ICPO can be sent, accepting the price and the seller's procedure.
WE ARE READY TO SUPPLY IN FOB ROTTERDAM/HOUSTON CI DIP PAY JET A1 - JP54 - VIRGIN FUEL OIL D6 - EN590 - No upfront fees - Seller will pay Buyer's tank farm lease for 3 days - Dip test after injecting to Buyer's tank farm TRANSACTION PROCEDURES FOB CI DIP & PAY 1) Buyer issues ICPO. 2) Seller issues Commercial Invoice (CI). Buyer signs and returns to Seller with his TSA. Seller verifies Buyer's TANK FARM and makes 3 days tank lease payment to the Buyer's tank farm for the Injection Process. 3) Buyer pays his Tank Farm Company for 2 days tank storage costs, (totaling 5 day TSR) after his Tank Farm Company has received the payment from Seller's Company 3 days cost. 4) Seller injects into Buyer's tank and issues ATV and Unconditional DTA. 5) Buyer conducts Dip Test and makes the payment for the total value of product injected into the tanks through the means of MT103-TT. 6) Seller pays all intermediaries involved in the transaction, and subsequently monthly shipment continues as per terms and conditions of the sales and purchase agreement contract between Buyer and Seller.
We can connect you with our friend end sellers/title holders to offer express work with petroleum products of Russian or non-Russian origin, where they can provide reliable and serious offers. Please contact us only if you are the real end buyer or his direct mandate. The products list: - Diesel EN590 - JET FUEL A1, JP 54 - VIRGIN D6 FUEL OIL - LPG, LNG - AGO Automotive Gas Oil - Gasoline Octane 72, 76, 91, 93, 95
Supplier: Fresh vegetables, fresh products: orange, potatoes, yellow onion, red onion, fresh garlic, dry garlic, dry white beans, pomegranate,
intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago)
intermediation for sugar icumsa 45, yellow corn, wheat
Services: Intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago)
intermediation for sugar icumsa 45, yellow corn, wheat
Buyer: Sugar icumsa 45, diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil
JET FUEL A1 The gold standard in aviation fuel, Jet A1 is renowned for its purity and reliability. Meeting stringent international standards, it powers aircraft worldwide with optimal performance and safety, making it the preferred choice for airlines and military operations. Delivery Terms: CIF / FOB Shipment. Payment Term: MT103 TT Wire Transfer. Quality : Q&Q test report will be conducted at the loading port by SGS equivalent at the expense of the seller. Products Origin: KAZAKHSTAN. Contract Term: 12 Months minimum after first successful trial (with rolls and extensions). PORT OF LOADING: JURONG PORT, SINGAPORE, AKTAU, PAVLODAR, KURYK, FUJAIRAH, VLADIVOSTOK, ROTTERDAM AND HOUSTON.
Radixsarl operates in Lebanon. Currently, we are running Worldwide operations from the United Arab Emirates (UAE) in the field of oil and petroleum trading. With years of affluent industry expertise and experience, we take pride in providing an extensive range of Jet Fuels (A1, JP54) along with chemicals, dyes & solvents. Our JET FUEL is quality assured and comply with international industry standards. Buyers can expect superior grade pieces, reliability, and admirable specifications in 240 per air-cooled price, having no match. Our Jet Fuels (A1, JP54) are demanded by local as well as international clients owing to the quality and our reputable position in the market. Our professional enterprise boasts an annual production of Large air-cooled under a highly strict quality control system, making Radixsarl a reliable Manufacturer and Importer of Jet Fuels (A1, JP54). We are accepting orders for JET FUEL with a minimum order quantity of 500,000 Gallon. For utmost customer satisfaction, a high level of transparency and proper documentation is maintained on purchases. We deliver orders in 6-7 Business Days via FOB, DEQ. we collaborate with numerous local and international distributors. For payment, we entertain EUR, USD, and T/T, D/A.
Non Russian origin, Jet Fuel A1, FOB Rotterdam or FOB Houston, no advance payment, no deposit, seller able to do tank to vessel & tank to tank Rotterdam or Houston, please
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
